[xorg]

I've got the patch working and tested with a javascript benchmark, which scored...

Default 500/600Mhz: 26-28
Forced 600/600Mhz: 30-33
Forced 800/800Mhz: 40-43

http://jsbenchmark.celtickane.com/Run.aspx

I'm using xorg tools to alter the frequency between 500-800 after the kernel patch is installed. I'll hookup with you guys about considering using xorg tools for not just the patch install, but changing the Mhz as desired more easily.

[jeking]

Installed without a problem. Great job, thanks!

There is one app I can't run now, WorkOut Tracker. I get the spash screen but the app never starts. I did try rebooting the phone, same thing. Is there a way to confirm a conflict of some kind, other than uninstalling this kernel?

[tcbeutler]

I believe UnixPsycho and Caj2008 stated before that there is no point overclocking any higher due to the speed of the IO of the system. If the input/output can't keep up there is not point and you will not see any gains in speed. Caj or UnixPscho please correct me if I'm wrong.

Eh, bus speed bottlenecks make sense if they were planning it to be running at 500-600. I haven't looked at the hardware specs to know where it would cap but if they're saying it then it stands to reason they chose 800.

Here's to hoping Palm puts WebOS on some nicer hardware and the new 1.5 GHz Snapdragon coming out...

[dandm4life]

The part I like the most so far, video recording sounds sync correctly

[omahawildcat]

root@palm-webos-device: /var/home/root
/var/home/root: Permission denied
root@palm-webos-device:

So Is this what is supposed to show up or not?

[intlstyle]

wow this really is flying, prereader would take a good 1-2min to load, and it loaded in under 30secs WOW....

thanks to all that had anything to do with this.

[spectre686]

So Is this what is supposed to show up or not?

No I believe you had the command wrong you need to to type in

ls /var/home/root

This will command will show you what files/directories are under the /var/home/root directory.

[omahawildcat]

root@palm-webos-device: ls /var/home/root
luna600patch.sh
root@palm-webos-device:

Sorry, here is what I get when typed correctly.

[thornev]

So Is this what is supposed to show up or not?

No. Do this instead:

ls -la /var/home/root

so we can see the permissions on the file(s).

[gselsidi]

Have you guys noticed any battery or performance differences between 720mhz-800mhz

[bignoze]

No. Do this instead:

ls -la /var/home/root

so we can see the permissions on the file(s).

root@palm-webos-device: ls -la /var/home/root
drwxr-xr-x 5 root root 4096 Feb 28 12:50 .
drwxr-xr-x 3 root root 4096 Dec 31 1999 ..
drwx------ 2 root root 4096 Mar 25 09:15 .dbus-keyrings
drwxr-xr-x 2 root root 4096 Feb 14 04:23 .gstreamer-0.10
drwx------ 2 root root 4096 Feb 21 09:46 .pulse
-rw------- 1 root root 256 Feb 14 04:23 .pulse-cookie
-rwxr-xr-x 1 root root 1804 Feb 28 12:50 luna600patch.sh
root@palm-webos-device:

[spectre686]

Sorry, here is what I get when typed correctly.

No problem.

So you still have the 600 mhz patch installed correct and you want to uninstall it?

So run

sh /var/home/root/luna600patch.sh uninstall

[baconnbitz2010]

I'm mainly curious as to IF it should still read that the 600MHz_OSIndependentpatch.sh

in the ls /var/root/home sub directory and IF that is a problem prior to loading the 720 or 800? I apologize but I'm not quite sure what you meant by rechecking the thread. Do you mean the instructions on installing? I did and didn't see anything specific to this question.

[Catweazlemac]

I've got the patch working and tested with a javascript benchmark, which scored...

Default 500/600Mhz: 26-28
Forced 600/600Mhz: 30-33
Forced 800/800Mhz: 40-43

Run Benchmark - JSBenchmark

I'm using xorg tools to alter the frequency between 500-800 after the kernel patch is installed. I'll hookup with you guys about considering using xorg tools for not just the patch install, but changing the Mhz as desired more easily.

I've overclocked to 720 MHz. Score with the test above is : 33-38

Cat

[Mikey47]

you forgot the "is"

it is "ls", not "is". Wow, I'm amazed at all the people willing to do this to their phone without any knowledge of Linux commands, etc.

[omahawildcat]

No problem.

So you still have the 600 mhz patch installed correct and you want to uninstall it?

So run

sh /var/home/root/luna600patch.sh uninstall

Weird, I could have sworn I did exactly this but never worked before. I must have mistyped something somewhere.

Thanks

[intlstyle]

So Is this what is supposed to show up or not?

NOT

Follow step 5...send the file u downloaded to /var/home/root in WOSQI

then in STEP 6....Command line enter the command for the patch... simple i missed it the first time

[bignoze]

No problem.

So you still have the 600 mhz patch installed correct and you want to uninstall it?

So run

sh /var/home/root/luna600patch.sh uninstall

I think that worked, it said "uninstalling" thanks!

[isseyphresh]

Same thing with me. So far I really haven't noticed much, other then the browser opening in like 1 second. Every other app seems to open up the same as usual. Hopefully it will get faster since I just did it like 5 minutes ago. Thanks to everyone involved in making this possible.

brickz I'm runnin the 800 patch...trust me everything is faster not just the browser...esp. with jstop...phone splash screen is now non-existent for me ...and an even better one...try scrolling through ur contacts...one swipe I go from a to z .... bye bye loading message! Thank you caj and unix for taking a huge stress away from my life!!! LMAO

[spectre686]

Weird, I could have sworn I did exactly this but never worked before. I must have mistyped something somewhere.

Thanks

I looked at your old post you did mistype you had typed:

sh /var/home/root/luna600patch.sh patch uninstall


It happens to everyone!