I'm running v. 1.1.1 that i downloaded about 1 month ago. The issue i'm having is that no matter what i set the scaler to, whether i set it at a fixed value like 720 or 800 or 125, or whether i pick one of the ranges, such as 250-800, my CPU only runs at one of two speeds: 500 or 600. That is, if i select a value above 500, like 720 or 800, then it runs at 600. If i select the 125 value, it runs at 500. At any range setting it just runs at 500, and for all of this it doesn't matter if i'm doing 'nothing' or if i am doing something like playing a video. Same results for a bunch of different cpu-using activities.

I check this using the "cat /proc/cpuinfo" and the "cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq" commands.

Any ideas as to why my uberscaler is stuck on either 500 or 600?

PS- this is a NEW phenomena. For the first few weeks, the scaler was working fine, the CPU seemed to do what i told it to, would run up to 800, down to 125-250, etc. depending on how i set it.