[seidioseidio]

The ultimate in convenience and functionality, this innovative, well-designed and well-engineered locking swivel clip holster is the easiest way to carry and fully protect your Treo 650.

The Seidio Locking Swivel Clip Holster provides you with these added benefits:

• Stylish design with the ability to slip your Treo 650 in and out of the holster with one hand, yet it stays securely in place.

• Easy access to all features including power button, headset jack, serial connector, volume control, and camera.

• Face-in model with foam pad to protect the screen.

• Perfect positioning while sitting or standing by rotating the 7 way, locking swivel belt clip.

• Made of very high impact and high performance plastic (PC- Polycarbonate) to assure the durability of the holster. It is reliable and can stand constant use.

Note: This holster is designed to slip you Treo 650 in and out of the holster with one hand. The bottom of the Treo 650 goes into the holster first and comes out last.

http://www.seidioonline.com/photos/HLTR650A-2.jpg

*Holsters also available for: Garmin iQUE 3600; iPAQ 6300; Treo 180/270/300; Treo 600; XDA I; Audiovox (Sprint); PPC-6601; iMate PDA2K

For more information about this product, please visit: http://www.seidioonline.com/ProductD...tCode=HLTR650A

For our full line of Treo 650 accessories, please visit: http://www.seidioonline.com/SearchResults.asp?Cat=417

[wjwhitty]

Just wanted to know if the boxwave flexiskin over the treo 650 will fit into your new 650 holster. I like your holster and really like the flexiskin cover. I feel that with that cover you can feel like you have a grip on the treo when you take it out of the holster. Just need to know if it will fit.

[scriber]

How secure is the phone inside the holster. Does it wiggle at all with some force since it is secured all the way on one side on top. Does the top being offcentered impact the ease of taking the phone out? I don't wanna do a one handed thing and because its clipped all the way on one side, flick it into the air by accident.

[seidioseidio]

Just wanted to know if the boxwave flexiskin over the treo 650 will fit into your new 650 holster. I like your holster and really like the flexiskin cover. I feel that with that cover you can feel like you have a grip on the treo when you take it out of the holster. Just need to know if it will fit.

Hi

I do not think it will fit into our new Treo 650 holster


David Chang
Seidio

[seidioseidio]

How secure is the phone inside the holster. Does it wiggle at all with some force since it is secured all the way on one side on top. Does the top being offcentered impact the ease of taking the phone out? I don't wanna do a one handed thing and because its clipped all the way on one side, flick it into the air by accident.

Hi Scriber,

All those concerns have been addressed by our design team. The arm which is to hold the Treo 650 at the top has been carefully designed to hold the Treo 650 securely while allowing the ease to taking the Treo 650 out.

David Chang
Seidio

[mszatny]

I hope someone can try this. I'd like to hear about how it compares to the ProClip holsters. ProClip will have their 650 holster in January.

MS

[wjwhitty]

What do people do about a cover(case) for their treo 650 and still be able to use your holster.

[mszatny]

I've had this Seidio Holster for a couple of days now...so I can make some general comments. I had been using the ProClip Holster with my T600 and then with my T650 (although a specific ProClip version for the T650 is forthcoming).

Overall, the Seidio Cradle Holster seems well made and performs as advertised. The PROS and CONS:

PROS:
+ Cradle / Clip design is very sturdy with the T650 well secured when holstered. Although you must use the opposite hand to remove the T650 from the Holster....I used the same side hand with the ProClip.

+ Swivel mechanism is very nice. I can adjust to a number of differant angle settings. I adjusted swivel position to an angel making it easiest to remove T650 from holster

+ T650 side/top buttons, SD Card, and bottom headphone and sync/charge ports are accessible.


CONS:
- Holster does not seem as tight to belt/waist compared to ProClip. Probably due to requirements of swivel mechanism

- Front of T650 fits very tightly against holster. There is a velvet type liner on the holster interior to prevent any scratches to the T650. Anyway...the fit is so close that when removing the T650 for an incoming call....buttons are pressed unintentionally. So, I have to use a utility like TREOGUARD to prevent these button presses from affecting incoming calls.

- Although the bottom headphone port is accessible when holstered, removing the phone with a headphone adapter inserted is impossible.

Bottomline....although the Seidio Holster is a good solution....I'm going to have to take a look at the ProClip version when available.

MS

[scriber]

- Front of T650 fits very tightly against holster. There is a velvet type liner on the holster interior to prevent any scratches to the T650. Anyway...the fit is so close that when removing the T650 for an incoming call....buttons are pressed unintentionally. So, I have to use a utility like TREOGUARD to prevent these button presses from affecting incoming calls.
MS

Man, I just ordered it too! I hope its not as bad as i think it is.

[DVD Guy]

I have been using this holster for a couple of weeks. It holds the 650 very nicely, but as mentioned above, you can not remove the 650 from the holster if you have the headphone jack in use.

Also, I just added eGrips to my 650. I love the way they feel and felt it would be a nice way to prevent scratches to the case. Unfortunately, this holster does not like the eGrips. The holster graps the 650 so tightly, it is already destroying my eGrips after a single days use. It will damage the egrips mainly on the sides and bottom.

[B-model#CB]

Hi all --

Just got this a few days ago. mszatny 's review is right on (thank you). I too was waiting for the proclip, but really needed something sooner. My experience w/ the 600 clip was very bad - it broke w/in three weeks and the phone keep fallling out - but so far, so good.

If you can I wait, IMO, see what pro clip has to offer before making the plung (www.proclipusa.com)

[scriber]

I placed my order over the weekend, and its still hasn't shipped. I don't understand why it takes more than 3 days to ship an item out? As it looks now, i'm probably not going to receive until next week sometime.

[seidioseidio]

I placed my order over the weekend, and its still hasn't shipped. I don't understand why it takes more than 3 days to ship an item out? As it looks now, i'm probably not going to receive until next week sometime.

Hi,

Your order will be shipped today.

Seidio

[scriber]

Why does it take 4 business days to ship an item out?

[barky81]

Why does it take 4 business days to ship an item out?

4 business days ? Try 6 business days (hopefully; after all, I may have tracking but it shows the package has not actually entered the fedex system yet...)

And the worst part, they still have the nerve to charge for the 2-day fedex shipping!?!?!?!?! (even though--MAYBE--they are going to ship it on a Thursday, so it won't arrive till Monday--and I am shipping it *TO* Memphis--fedex's hub...)

Oh well, lesson learned.

[seidioseidio]

I've had this Seidio Holster for a couple of days now...so I can make some general comments. I had been using the ProClip Holster with my T600 and then with my T650 (although a specific ProClip version for the T650 is forthcoming).

Overall, the Seidio Cradle Holster seems well made and performs as advertised. The PROS and CONS:

PROS:
+ Cradle / Clip design is very sturdy with the T650 well secured when holstered. Although you must use the opposite hand to remove the T650 from the Holster....I used the same side hand with the ProClip.

+ Swivel mechanism is very nice. I can adjust to a number of differant angle settings. I adjusted swivel position to an angel making it easiest to remove T650 from holster

+ T650 side/top buttons, SD Card, and bottom headphone and sync/charge ports are accessible.


CONS:
- Holster does not seem as tight to belt/waist compared to ProClip. Probably due to requirements of swivel mechanism

- Front of T650 fits very tightly against holster. There is a velvet type liner on the holster interior to prevent any scratches to the T650. Anyway...the fit is so close that when removing the T650 for an incoming call....buttons are pressed unintentionally. So, I have to use a utility like TREOGUARD to prevent these button presses from affecting incoming calls.

- Although the bottom headphone port is accessible when holstered, removing the phone with a headphone adapter inserted is impossible.

Bottomline....although the Seidio Holster is a good solution....I'm going to have to take a look at the ProClip version when available.

MS

Hi,

Seidio released and is shipping an updated version of the holster for Treo 650. With this new version, buttons will not be pressed unintentionally when Treo 650 is removed from holster for an incoming call.

PLease contact RMA@seidio.com for exchange.

Any questions, please contact us.

David Chang
Seidio
dsc@seidio.com

[seidioseidio]

Why does it take 4 business days to ship an item out?

Hi,

Sorry for the delay as we are waiting for the updated version to arrive.

Seidio

[gadgetfreak]

Didn't this Company have to do something similar with the first version of the T600 holster?

[barky81]

Hi,

Sorry for the delay as we are waiting for the updated version to arrive.

Seidio

Perhaps your website should have reflected that...

[seidioseidio]

So what has changed with the update?

Seidio released and is shipping an updated version of the holster for Treo 650. With this new version, buttons will not be pressed unintentionally when Treo 650 is removed from holster for an incoming call.

Seidio