Results 1 to 2 of 2
  1.    #1  
    I have not used my 90 in well over a year, since I got the 300. the 90 is in real good shape and I'm holding on to it in case I need it to come off the bench and temporarily fill in (along with my old KyoceraQCP 3035) for my 300 or someday my 650. Anyway, I just tossed the 90 in a drawer and the battery has been drained dead for months. Anything special I should do to make sure this old spare tire will work if and when I need it?

  2. #2  
    Try an in-cradle reset to wakeup the internal circuitry of your Treo 90.

    1. Connect your device securely to its charging cradle or cable, and connect the cradle/cable to a power source.
    2. Use an unfolded paper clip, or the reset tool at the tip of your stylus.
    3. Gently press the reset button inside the hole on the back panel of your device.
    4. All data on your device should be retained. If you do lose data after a soft reset, you may have a more serious issue with your hardware that requires a repair.
    5. After a soft reset, the Welcome screen appears, followed shortly by the General Preferences screen (to set time and date).

Posting Permissions