Results 1 to 8 of 8
  1.    #1  
    Hi there,
    after some time I was able to become an Galaxy Nexus. I Install LuneOS.
    All go well, unlock OK, recovery install OK, install zip with Clockworkmod OK, reboot ...

    Screen keeps black ... waiting looooooong .... nothing.

    With adb shell I can access the phone. Dmesg say:
    bash-4.3# dmesg
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.0.101 (jenkins@bonaire) (gcc version 5.3.0 (GCC) ) #1 SMP PREEMPT Sun Apr 30 10:39:08 UTC 2017
    [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
    [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
    [ 0.000000] Machine: Tuna
    [ 0.000000] android_display: setting default resolution 720*1280, bpp=4
    [ 0.000000] android_display: tiler1d 29491200
    [ 0.000000] android_display: setting fb0.vram to 15728640
    [ 0.000000] android_display: setting vram to 15728640 at address 0xbea00000
    [ 0.000000] android_display: ion carveouts: 104726528 tiler2d, 0 nonsecure
    [ 0.000000] omap4_total_ram_size = 0x80000000
    [ 0.000000] omap4_smc_size = 0x300000
    [ 0.000000] omap4_ion_heap_secure_input_size = 0x900000
    [ 0.000000] omap4_ion_heap_secure_output_wfdhdcp_size = 0x0
    [ 0.000000] omap4_ducati_heap_size = 0x6900000
    [ 0.000000] omap4_ion_heap_tiler_mem_size = 0x0
    [ 0.000000] omap4_ion_heap_nonsec_tiler_mem_size = 0x0
    [ 0.000000] omap4_smc_addr = 0xffd00000
    [ 0.000000] omap4_ion_heap_secure_input_addr = 0xba300000
    [ 0.000000] omap4_ion_heap_secure_output_wfdhdcp_addr = 0xba300000
    [ 0.000000] omap4_ducati_heap_addr = 0xb3a00000
    [ 0.000000] omap4_ion_heap_tiler_mem_addr = 0xb3a00000
    [ 0.000000] omap4_ion_heap_nonsec_tiler_mem_addr = 0xb3a00000
    [ 0.000000] omap_ion_init: secure_input id=2 [ba300000-bac00000] size=900000
    [ 0.000000] omap_ion_init: secure_output_wfdhdcp id=5 [ba300000-ba300000] size=0
    [ 0.000000] omap_ion_init: tiler id=1 [b3a00000-b3a00000] size=0
    [ 0.000000] omap_ion_init: nonsecure_tiler id=3 [b3a00000-b3a00000] size=0
    [ 0.000000] omap_ion_init: system id=0 [0-0] size=0
    [ 0.000000] omap_ion_init: tiler_reservation id=4 [0-0] size=0
    [ 0.000000] Reserving 16777216 bytes SDRAM for VRAM
    [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
    [ 0.000000] OMAP4460 ES1.1
    [ 0.000000] SRAM: Mapped pa 0x4030d000 to va 0xfe40d000 size: 0x1000
    [ 0.000000] SMC: Allocated workspace of 0x300000 Bytes at (0xbfd00000)
    [ 0.000000] On node 0 totalpages: 228352
    [ 0.000000] free_area_init_node: node 0, pgdat c08e47e0, node_mem_map c0971000
    [ 0.000000] Normal zone: 256 pages used for memmap
    [ 0.000000] Normal zone: 0 pages reserved
    [ 0.000000] Normal zone: 32512 pages, LIFO batch:7
    [ 0.000000] HighMem zone: 1792 pages used for memmap
    [ 0.000000] HighMem zone: 193792 pages, LIFO batch:31
    [ 0.000000] PERCPU: Embedded 7 pages/cpu @c1178000 s8128 r8192 d12352 u32768
    [ 0.000000] pcpu-alloc: s8128 r8192 d12352 u32768 alloc=8*4096
    [ 0.000000] pcpu-alloc: [0] 0 [0] 1
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 226304
    [ 0.000000] Kernel command line: console=ttyFIQ0 androidboot.console=ttyFIQ0 mem=1G vmalloc=768M omap_wdt.timer_margin=30 no_console_suspend loglevel=3 console=ttyFIQ0 androidboot.console=ttyFIQ0 mem=1G vmalloc=768M omap_wdt.timer_margin=30 no_console_suspend androidboot.serialno=0149BD7D1701F00F androidboot.bootloader=PRIMEMD04 androidboot.baseband=I9250XXLJ1 lcd_bootfb=0xbea70000 mms_ts.panel_id=18 androidboot.macaddr=
    [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
    [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
    [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
    [ 0.000000] allocated 4194304 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Memory: 512MB 312MB 62MB 6MB = 892MB total
    [ 0.000000] Memory: 888200k/1776400k available, 320752k reserved, 782336K highmem
    [ 0.000000] Virtual kernel memory layout:
    [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
    [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
    [ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
    [ 0.000000] vmalloc : 0xc8800000 - 0xf8000000 ( 760 MB)
    [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
    [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
    [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
    [ 0.000000] .init : 0xc0008000 - 0xc004f000 ( 284 kB)
    [ 0.000000] .text : 0xc004f000 - 0xc087f000 (8384 kB)
    [ 0.000000] .data : 0xc0880000 - 0xc08e67e0 ( 410 kB)
    [ 0.000000] .bss : 0xc08e6804 - 0xc0970b00 ( 553 kB)
    [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] NR_IRQS:410
    [ 0.000000] omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for dpll_mpu_m2_ck.
    [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
    [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
    [ 0.000000] Console: colour dummy device 80x30
    [ 0.000030] Calibrating delay loop... 1194.24 BogoMIPS (lpj=4665344)
    [ 0.070434] pid_max: default: 32768 minimum: 301
    [ 0.070434] Security Framework initialized
    [ 0.070648] AppArmor: AppArmor initialized
    [ 0.070648] Mount-cache hash table entries: 512
    [ 0.070800] Initializing cgroup subsys debug
    [ 0.071594] Initializing cgroup subsys cpuacct
    [ 0.071655] Initializing cgroup subsys memory
    [ 0.071655] Initializing cgroup subsys devices
    [ 0.071716] Initializing cgroup subsys freezer
    [ 0.071716] Initializing cgroup subsys net_cls
    [ 0.071716] Initializing cgroup subsys blkio
    [ 0.071716] Initializing cgroup subsys perf_event
    [ 0.071838] CPU: Testing write buffer coherency: ok
    [ 0.072296] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
    [ 0.072387] L310 cache controller enabled
    [ 0.072418] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x5e470000, Cache size: 1048576 B
    [ 0.150482] CPU1: Booted secondary processor
    [ 0.181732] Brought up 2 CPUs
    [ 0.181732] SMP: Total of 2 processors activated (2388.48 BogoMIPS).
    [ 0.182250] devtmpfs: initialized
    [ 0.185791] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for emif_fw
    [ 0.185791] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_instr
    [ 0.185913] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_1
    [ 0.185913] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_2
    [ 0.185943] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_abe
    [ 0.185943] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_cfg
    [ 0.185974] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_per
    [ 0.185974] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_wkup
    [ 0.186004] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for mpu_private
    [ 0.186004] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for sl2if
    [ 0.186004] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for thermal_sensor
    [ 0.186004] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for usbhs_ehci
    [ 0.186431] omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck.
    [ 0.186431] omap_hwmod: l4_div_ck: missing clockdomain for l4_div_ck.
    [ 0.189514] _omap4_module_wait_ready: Timeout waiting for module enable (mcpdm_fck: clkctrl = 0x30002)
    [ 0.194458] omap_hwmod: mcpdm: cannot be enabled (3)
    [ 0.196777] print_constraints: dummy:
    [ 0.197326] NET: Registered protocol family 16
    [ 0.197326] GPMC revision 6.0
    [ 0.198791] EMIF0 is enabled with IRQ142
    [ 0.198791] EMIF1 is enabled with IRQ143
    [ 0.198913] Last reset was warm software reset (PRM_RSTST=0x2)
    [ 0.199096] HSI: device registered as omap_hwmod: hsi
    [ 0.199249] OMAP GPIO hardware version 0.1
    [ 0.200408] omap_mux_init: Add partition: #1: core, flags: 2
    [ 0.201995] omap_mux_init: Add partition: #2: wkup, flags: 2
    [ 0.202209] Tuna HW revision: 09 (Maguro 8th Sample), cpu OMAP4460 ES1.1
    [ 0.205139] Using tuna_oled_factory_info_6500k
    [ 0.207702] _omap_mux_init_gpio: Multiple gpio paths (2) for gpio102
    [ 0.207733] omap_mux_init_gpio: Could not set gpio102
    [ 0.208190] _omap_mux_init_gpio: Multiple gpio paths (2) for gpio101
    [ 0.208221] omap_mux_init_gpio: Could not set gpio101
    [ 0.208374] _omap_mux_init_gpio: Multiple gpio paths (2) for gpio100
    [ 0.208435] omap_mux_init_gpio: Could not set gpio100
    [ 0.208435] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
    [ 0.209075] hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
    [ 0.209075] hw-breakpoint: maximum watchpoint size is 4 bytes.
    [ 0.214294] OMAP DMA hardware revision 0.0
    [ 0.214294] omap_rproc_get_pool: carveout memory is unavailable: 0x0, 0x0
    [ 0.222106] bio: create slab <bio-0> at 0
    [ 0.222351] print_constraints: vwl1271: 2000 mV
    [ 0.222351] i2c-core: driver [twl] using legacy suspend method
    [ 0.222351] i2c-core: driver [twl] using legacy resume method
    [ 0.222351] SCSI subsystem initialized
    [ 0.224365] usbcore: registered new interface driver usbfs
    [ 0.224365] usbcore: registered new interface driver hub
    [ 0.224945] usbcore: registered new device driver usb
    [ 0.226013] i2c-gpio i2c-gpio.5: using pins 98 (SDA) and 99 (SCL)
    [ 0.226257] omap_i2c omap_i2c.1: bus 1 rev4.0 at 400 kHz
    [ 0.226867] Skipping twl internal clock init and using bootloader value (unknown osc rate)
    [ 0.230468] twl6030: PIH (irq 39) chaining IRQs 368..387
    [ 0.232421] print_constraints: VUSB: 3300 mV normal standby
    [ 0.233184] print_constraints: VMMC: 1800 mV normal standby
    [ 0.233917] print_constraints: VPP: 1800 <--> 2500 mV at 1900 mV normal standby
    [ 0.233917] print_constraints: VUSIM: 2200 mV normal standby
    [ 0.234558] print_constraints: VCXIO: 1800 mV normal standby
    [ 0.234558] print_constraints: VDAC: 1800 mV normal standby
    [ 0.235717] print_constraints: VAUX1_6030: 3000 mV normal standby
    [ 0.236480] print_constraints: VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normal standby
    [ 0.236480] print_constraints: VAUX3_6030: 3100 mV normal standby
    [ 0.237670] print_constraints: VDD3:
    [ 0.238372] print_constraints: VMEM: at 1250 mV
    [ 0.239196] print_constraints: V2V1: 2100 mV normal standby
    [ 0.239898] print_constraints: VANA: 2100 mV normal standby
    [ 0.240844] print_constraints: CLK32KG:
    [ 0.241668] print_constraints: CLK32KAUDIO:
    [ 0.241851] omap_i2c omap_i2c.2: bus 2 rev4.0 at 400 kHz
    [ 0.242218] omap_i2c omap_i2c.3: bus 3 rev4.0 at 400 kHz
    [ 0.242523] omap_i2c omap_i2c.4: bus 4 rev4.0 at 400 kHz
    [ 0.243408] omap-rproc omap-rproc.0: dsp is available
    [ 0.243408] omap-rproc omap-rproc.1: ipu is available
    [ 0.243408] Advanced Linux Sound Architecture Driver Version 1.0.24.
    [ 0.244781] Bluetooth: Core ver 2.16
    [ 0.244781] NET: Registered protocol family 31
    [ 0.244781] Bluetooth: HCI device and connection manager initialized
    [ 0.244873] Bluetooth: HCI socket layer initialized
    [ 0.244873] Bluetooth: L2CAP socket layer initialized
    [ 0.244934] Bluetooth: SCO socket layer initialized
    [ 0.245391] cfg80211: Calling CRDA to update world regulatory domain
    [ 0.245513] NetLabel: Initializing
    [ 0.245513] NetLabel: domain hash size = 128
    [ 0.245544] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.245544] NetLabel: unlabeled traffic allowed by default
    [ 0.245544] Switching to clocksource 32k_counter
    [ 0.252014] Switched to NOHz mode on CPU #0
    [ 0.252044] Switched to NOHz mode on CPU #1
    [ 0.260955] AppArmor: AppArmor Filesystem Enabled
    [ 0.270782] musb-hdrc: version 6.0, musb-dma, otg (peripheral+host)
    [ 0.271423] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
    [ 0.271453] musb-hdrc: MHDRC RTL version 2.0
    [ 0.271484] musb-hdrc: setup fifo_mode 4
    [ 0.271484] musb-hdrc: 28/31 max ep, 16384/16384 memory
    [ 0.271484] musb-hdrc musb-hdrc: USB OTG mode controller at fc0ab000 using DMA, IRQ 124
    [ 0.272094] NET: Registered protocol family 2
    [ 0.272094] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.273468] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.273468] TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
    [ 0.274169] TCP: Hash tables configured (established 16384 bind 16384)
    [ 0.274169] TCP reno registered
    [ 0.274200] UDP hash table entries: 128 (order: 0, 4096 bytes)
    [ 0.274200] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
    [ 0.274719] NET: Registered protocol family 1
    [ 0.274719] Trying to unpack rootfs image as initramfs...
    [ 0.581909] Freeing initrd memory: 3060K
    [ 1.059448] PHOENIX_LAST_TURNOFF_STS: 0x01
    [ 1.064086] console [ttyFIQ0] enabled
    [ 1.064086] Registered FIQ tty driver c78d3a80
    [ 1.065093] ram_console: got buffer at a0000000, size 200000
    [ 1.065093] ram_console: found existing buffer, size 36764, start 36764
    [ 1.152038] console [ram-1] enabled
    [ 1.153198] omap-iommu omap-iommu.0: ducati registered
    [ 1.153198] omap-iommu omap-iommu.1: tesla registered
    [ 1.153198] audit: initializing netlink socket (disabled)
    [ 1.154449] type=2000 audit(1.093:1): initialized
    [ 1.155578] highmem bounce pool size: 64 pages
    [ 1.155731] ashmem: initialized
    [ 1.164489] NTFS driver 2.1.30 [Flags: R/O].
    [ 1.168212] fuse init (API version 7.16)
    [ 1.168212] msgmni has been set to 212
    [ 1.168212] Registering char device tf_driver (122:0)
    [ 1.168212] SMCAG01.06p6.0 D
    [ 1.172027] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 1.172027] io scheduler noop registered
    [ 1.172027] io scheduler deadline registered (default)
    [ 1.172760] io scheduler cfq registered
    [ 1.173767] OMAP DSS rev 4.0
    [ 1.176147] Keyboard driver not present
    [ 1.177337] dsscomp: initializing.
    [ 1.177337] misc dsscomp: display0=s6e8aa0
    [ 1.177337] misc dsscomp: display1=hdmi_panel
    [ 1.177337] misc dsscomp: found 2 displays and 4 overlays, WB overlay 1
    [ 1.178344] could not allocate slot
    [ 1.179687] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
    [ 1.180267] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
    [ 1.181091] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
    [ 1.182006] omap_ion_probe: adding heap secure_input of type 2 with ba300000@900000
    [ 1.182220] omap_ion_probe: adding heap secure_output_wfdhdcp of type 2 with ba300000@0
    [ 1.182342] omap_ion_probe: adding heap tiler of type 4 with b3a00000@0
    [ 1.182556] omap_ion_probe: adding heap nonsecure_tiler of type 4 with b3a00000@0
    [ 1.182739] omap_ion_probe: adding heap system of type 0 with 0@0
    [ 1.182861] omap_ion_probe: adding heap tiler_reservation of type 5 with 0@0
    [ 1.189910] brd: module loaded
    [ 1.193572] loop: module loaded
    [ 1.194793] input: barometer as /devices/virtual/input/input0
    [ 1.195129] sec_jack_probe : Registering jack driver
    [ 1.195800] i2c i2c-4: mpu_probe: 0
    [ 1.208953] i2c i2c-4: Installing irq using 205
    [ 1.209045] i2c i2c-4: Module Param interface = mpuirq
    [ 1.209442] i2c-core: driver [mpu3050] using legacy suspend method
    [ 1.209625] i2c-core: driver [mpu3050] using legacy resume method
    [ 1.209747] mpu_init: Probe name mpu3050
    [ 1.210083] i2c i2c-4: bma250_mod_probe: bma250
    [ 1.210174] i2c i2c-4: Installing Accel irq using 282
    [ 1.222686] i2c i2c-4: mpu3050: +bma250
    [ 1.222869] bma250_mod_init: Probe name bma250_mod
    [ 1.223022] i2c i2c-4: yas530_mod_probe: yas530
    [ 1.223205] i2c i2c-4: Installing Compass irq using 336
    [ 1.240844] i2c i2c-4: mpu3050: +yas530
    [ 1.241088] yas530_mod_init: Probe name yas530_mod
    [ 1.247406] omap_temp_sensor omap_temp_sensor.0: omap_temp_sensor probed
    [ 1.258056] m25p80 spi3.0: w25q80 (1024 Kbytes)
    [ 1.259307] PPP generic driver version 2.4.2
    [ 1.259643] PPP Deflate Compression module registered
    [ 1.259826] PPP BSD Compression module registered
    [ 1.262695] PPP MPPE Compression module registered
    [ 1.262878] NET: Registered protocol family 24
    [ 1.264923] tun: Universal TUN/TAP device driver, 1.6
    [ 1.265045] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
    [ 1.265472] usbcore: registered new interface driver asix
    [ 1.265716] usbcore: registered new interface driver cdc_ether
    [ 1.265869] usbcore: registered new interface driver net1080
    [ 1.266082] usbcore: registered new interface driver cdc_subset
    [ 1.266265] usbcore: registered new interface driver zaurus
    [ 1.266448] cdc_ncm: 04-Aug-2011
    [ 1.266601] usbcore: registered new interface driver cdc_ncm
    [ 1.266693] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.267120] usbcore: registered new interface driver cdc_acm
    [ 1.267242] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
    [ 1.267425] Initializing USB Mass Storage driver...
    [ 1.267669] usbcore: registered new interface driver usb-storage
    [ 1.267761] USB Mass Storage support registered.
    [ 1.268035] usbcore: registered new interface driver usbserial
    [ 1.268218] usbserial: USB Serial Driver core
    [ 1.270355] android_usb gadget: Mass Storage Function, version: 2009/09/11
    [ 1.270568] android_usb gadget: Number of LUNs=1
    [ 1.270660] lun0: LUN: removable file: (no medium)
    [ 1.271270] android_usb gadget: android_usb ready
    [ 1.271362] musb-hdrc musb-hdrc: MUSB HDRC host driver
    [ 1.271667] musb-hdrc musb-hdrc: new USB bus registered, assigned bus number 1
    [ 1.271881] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    [ 1.272064] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 1.272247] usb usb1: Product: MUSB HDRC host driver
    [ 1.272338] usb usb1: Manufacturer: Linux 3.0.101 musb-hcd
    [ 1.272521] usb usb1: SerialNumber: musb-hdrc
    [ 1.273284] hub 1-0:1.0: USB hub found
    [ 1.273406] hub 1-0:1.0: 1 port detected
    [ 1.274688] input: Melfas MMSxxx Touchscreen as /devices/platform/omap/omap_i2c.3/i2c-3/3-0048/input/input1
    [ 1.652587] mms_ts 3-0048: fw version 0x65 already present
    [ 1.652618] GPIO Input Driver: Start gpio inputs for tuna-gpio-keypad in interrupt mode
    [ 1.652832] GPIO Input Driver: Start gpio inputs for tuna-gpio-keypad in interrupt mode
    [ 1.653137] input: tuna-gpio-keypad as /devices/virtual/input/input2
    [ 1.653167] mms_ts 3-0048: Melfas MMS-series touch controller initialized
    [ 1.654327] input: proximity as /devices/virtual/input/input3
    [ 1.654968] input: lightsensor-level as /devices/virtual/input/input4
    [ 1.659423] using rtc device, twl_rtc, for alarms
    [ 1.659576] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
    [ 1.659973] i2c /dev entries driver
    [ 1.661071] dmm: probe base: fd300000, irq 145
    [ 1.664520] max17040 4-0036: MAX17040 Fuel-Gauge Ver 3
    [ 1.667083] OMAP Watchdog Timer Rev 0x01: initial timeout 30 sec
    [ 1.668975] device-mapper: uevent: version 1.0.3
    [ 1.669647] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
    [ 1.670013] Bluetooth: HCI UART driver ver 2.2
    [ 1.670196] Bluetooth: HCI H4 protocol initialized
    [ 1.670410] cpuidle: using governor ladder
    [ 1.670593] cpuidle: using governor menu
    [ 1.674560] usbcore: registered new interface driver usbhid
    [ 1.674682] usbhid: USB HID core driver
    [ 1.677368] OMAP HSI: HSI driver version 0.4.3
    [ 1.677703] omap_hsi omap_hsi.0: Registering IRQ hsi_p1_mpu (99)
    [ 1.677917] omap_hsi omap_hsi.0: HSI port 1 initialized
    [ 1.678039] omap_hsi omap_hsi.0: Registering IRQ hsi_dma_mpu (103)
    [ 1.678375] omap_hsi omap_hsi.0: HSI Hardware REVISION 0x50043101
    [ 1.680175] omap_hsi omap_hsi.0: Cannot set HSI FClk to default value: 96000000. Will retry on next open
    [ 1.686035] Tuna ASoC init
    [ 1.693359] twl6040-codec twl6040-codec: couldn't get VDDHF regulator -19
    [ 1.721984] asoc: null-codec-dai <-> MultiMedia1 mapping ok
    [ 1.724456] asoc: null-codec-dai <-> MultiMedia2 mapping ok
    [ 1.726593] asoc: null-codec-dai <-> Voice mapping ok
    [ 1.728149] asoc: null-codec-dai <-> Tones mapping ok
    [ 1.729766] asoc: null-codec-dai <-> Vibra mapping ok
    [ 1.730865] asoc: null-codec-dai <-> MODEM mapping ok
    [ 1.731903] asoc: null-codec-dai <-> MultiMedia1 LP mapping ok
    [ 1.733978] asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok
    [ 1.735565] asoc: twl6040-dl1 <-> mcpdm-dl mapping ok
    [ 1.737121] asoc: dit-hifi <-> omap-mcasp-dai mapping ok
    [ 1.740264] twl6040-codec twl6040-codec: ASoC: Failed to create Aux/FM Stereo In debugfs file
    [ 1.741394] asoc: twl6040-dl1 <-> mcpdm-dl1 mapping ok
    [ 1.742462] asoc: twl6040-ul <-> mcpdm-ul1 mapping ok
    [ 1.743469] asoc: twl6040-dl2 <-> mcpdm-dl2 mapping ok
    [ 1.744567] asoc: twl6040-vib <-> mcpdm-vib mapping ok
    [ 1.745574] asoc: Bluetooth <-> omap-mcbsp-dai.0 mapping ok
    [ 1.749999] asoc: Bluetooth <-> omap-mcbsp-dai.0 mapping ok
    [ 1.751251] asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok
    [ 1.752624] asoc: MODEM <-> omap-mcbsp-dai.1 mapping ok
    [ 1.756927] asoc: null-codec-dai <-> omap-abe-vxrec-dai mapping ok
    [ 1.759857] input: Tuna Headset Jack as /devices/platform/soc-audio/sound/card0/input5
    [ 1.763977] asoc: hdmi-audio-codec <-> hdmi-audio-dai mapping ok
    [ 1.764770] ALSA device list:
    [ 1.764892] #0: TI OMAP4 Board
    [ 1.764984] #1: OMAP4HDMI
    [ 1.765289] GACT probability NOT on
    [ 1.765380] Mirror/redirect action on
    [ 1.765502] u32 classifier
    [ 1.765594] Actions configured
    [ 1.766906] TCP cubic registered
    [ 1.766998] Initializing XFRM netlink socket
    [ 1.767974] NET: Registered protocol family 10
    [ 1.772735] Mobile IPv6
    [ 1.772857] IPv6 over IPv4 tunneling driver
    [ 1.778015] NET: Registered protocol family 17
    [ 1.778289] NET: Registered protocol family 15
    [ 1.778656] Bluetooth: RFCOMM TTY layer initialized
    [ 1.778839] Bluetooth: RFCOMM socket layer initialized
    [ 1.778930] Bluetooth: RFCOMM ver 1.11
    [ 1.779052] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [ 1.779266] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    [ 1.779479] NET: Registered protocol family 35
    [ 1.780059] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
    [ 1.780273] ThumbEE CPU extension supported.
    [ 1.780487] Registering SWP/SWPB emulation handler
    [ 1.787353] Reprogramming LPDDR2 timings to 400000000 Hz
    [ 1.787780] sr_init: No PMIC hook to init smartreflex
    [ 1.788085] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
    [ 1.788391] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
    [ 1.788696] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized
    [ 1.789062] SmartReflex class 1.5 driver: initialized (86400000ms)
    [ 1.789825] Power Management for TI OMAP4.
    [ 1.790069] OMAP4 PM: Static dependency added between MPUSS and DUCATI <-> L4_PER/CFG and L3_1.
    [ 1.792419] dmtimer id 10 at 48086000...
    [ 1.792510] OMAP_TIMER_OCP_CFG_REG: 0x000015
    [ 1.792663] OMAP_TIMER_SYS_STAT_REG: 0x000001
    [ 1.792755] OMAP_TIMER_STAT_REG: 0x000000
    [ 1.792877] OMAP_TIMER_INT_EN_REG: 0x000000
    [ 1.793029] OMAP_TIMER_WAKEUP_EN_REG: 0x000000
    [ 1.793121] OMAP_TIMER_CTRL_REG: 0x000000
    [ 1.793212] OMAP_TIMER_COUNTER_REG: 0x000000
    [ 1.793365] OMAP_TIMER_LOAD_REG: 0x000000
    [ 1.793426] OMAP_TIMER_MATCH_REG: 0x000000
    [ 1.793579] OMAP_TIMER_IF_CTRL_REG: 0x000004
    [ 1.794250] dmtimer id 10 at 48086000...
    [ 1.794342] OMAP_TIMER_OCP_CFG_REG: 0x000015
    [ 1.794494] OMAP_TIMER_SYS_STAT_REG: 0x000001
    [ 1.794586] OMAP_TIMER_STAT_REG: 0x000000
    [ 1.794677] OMAP_TIMER_INT_EN_REG: 0x000000
    [ 1.794830] OMAP_TIMER_WAKEUP_EN_REG: 0x000000
    [ 1.794921] OMAP_TIMER_CTRL_REG: 0x001842
    [ 1.794982] OMAP_TIMER_COUNTER_REG: 0xfffffffe
    [ 1.795074] OMAP_TIMER_LOAD_REG: 0xfffffa49
    [ 1.795166] OMAP_TIMER_MATCH_REG: 0xfffffa50
    [ 1.795318] OMAP_TIMER_IF_CTRL_REG: 0x000004
    [ 1.796173] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:0 (mask:ff)
    [ 1.796447] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:1 (mask:ff)
    [ 1.796722] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:2 (mask:ff)
    [ 1.796905] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:3 (mask:ff)
    [ 1.797180] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:4 (mask:ff)
    [ 1.797424] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:5 (mask:ff)
    [ 1.797668] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:6 (mask:ff)
    [ 1.797943] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:7 (mask:ff)
    [ 1.800811] mmc0: new high speed MMC card at address 0001
    [ 1.801330] mmcblk0: mmc0:0001 V3U00M 14.6 GiB
    [ 1.801574] mmcblk0boot0: mmc0:0001 V3U00M partition 1 2.00 MiB
    [ 1.801879] mmcblk0boot1: mmc0:0001 V3U00M partition 2 2.00 MiB
    [ 1.806640] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13
    [ 1.810180] mmcblk0boot1: unknown partition table
    [ 1.811248] mmcblk0boot0: unknown partition table
    [ 1.816314] sr_class1p5_calib_work: mpu: Calibration complete: Voltage:Nominal=1203000 Calib=1080000 margin=0
    [ 1.816589] sr_class1p5_calib_work: core: Calibration complete: Voltage:Nominal=1127000 Calib=987520 margin=13000
    [ 1.822052] clock: disabling unused clocks to save power
    [ 1.863128] sr_class1p5_calib_work: iva Stop sampling: Voltage Nominal=950000 samples=12
    [ 1.863372] sr_class1p5_calib_work: iva: Calibration complete: Voltage:Nominal=950000 Calib=860920 margin=13000
    [ 2.047424] cannot apply mgr(lcd) on inactive device
    [ 2.047698] omapfb omapfb: failed to apply dispc config
    [ 2.048065] cannot apply mgr(tv) on inactive device
    [ 2.048339] omapfb omapfb: failed to apply dispc config
    [ 2.048553] cannot apply mgr(lcd2) on inactive device
    [ 2.048950] omapfb omapfb: failed to apply dispc config
    [ 2.054168] regulator_init_complete: VDAC: disabling
    [ 2.056060] regulator_init_complete: VUSB: disabling
    [ 2.056793] ## wifi_probe
    [ 2.057006] wifi_set_power = 1
    [ 2.581970] wifi_set_carddetect = 1

    [ 2.590270] Dongle Host Driver, version 5.90.195.114
    [ 2.590270] Compiled in drivers/net/wireless/bcmdhd on Apr 30 2017 at 10:38:46
    [ 2.697937] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
    [ 2.745422] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
    [ 2.764343] mmc1: new high speed SDIO card at address 0001
    [ 2.766265] F1 signature read @0x18000000=0x16844330
    [ 2.773956] DHD: dongle ram size is set to 294912(orig 294912)
    [ 2.775451] wl_create_event_handler thr:63 started
    [ 2.782318] p2p0: P2P Interface Registered
    [ 2.782653] dhd_attach thr:64 started
    [ 2.783111] dhd_attach thr:65 started
    [ 2.783447] dhd_attach thr:66 started
    [ 2.788024] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
    [ 2.788208] wifi_set_power = 0
    [ 3.309112] =========== WLAN placed in RESET ========
    [ 3.310638] fsa9480 4-0025: nothing attached, keeping ownership of port
    [ 3.311981] twl_rtc twl_rtc: setting system clock to 2018-07-11 06:21:52 UTC (1531290112)
    [ 3.313415] Freeing init memory: 284K
    [ 3.363189] sr_class1p5_calib_work: mpu: Calibration complete: Voltage:Nominal=1380000 Calib=1240000 margin=0
    [ 3.372192] Mounting sdcard/nand as /dev/mmcblk0p12 ...
    [ 3.385192] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: (null)
    [ 3.392303] Checking for rootfs image on sdcard/nand for /sdcard/luneos ...
    [ 3.397247] Rootfs folder found at /sdcard/luneos; chrooting into ...
    [ 3.408020] Umount not needed filesystems ...
    [ 3.496704] Preparing /sdcard/luneos-data
    [ 8.063934] Bind-mount the directories
    [ 8.073913] Setup the user data directory
    [ 8.091094] Creating SWAP device ...
    [ 18.027252] sr_class1p5_calib_work: mpu: Calibration complete: Voltage:Nominal=1317000 Calib=1200000 margin=0
    [ 21.152191] INFO: task firmware/hdcp.k:48 blocked for more than 10 seconds.
    [ 21.152313] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
    [ 21.152404] firmware/hdcp.k D c0652958 0 48 2 0x00000000
    [ 21.152587] Backtrace:
    [ 21.152709] [<c06526b8>] (__schedule+0x0/0x7e0) from [<c0652ee8>] (schedule+0x50/0x68)
    [ 21.152801] [<c0652e98>] (schedule+0x0/0x68) from [<c065365c>] (schedule_timeout+0x2c0/0x368)
    [ 21.152923] [<c065339c>] (schedule_timeout+0x0/0x368) from [<c0652538>] (wait_for_common+0xb4/0x170)
    [ 21.153045] [<c0652484>] (wait_for_common+0x0/0x170) from [<c065260c>] (wait_for_completion+0x18/0x1c)
    [ 21.153106] [<c06525f4>] (wait_for_completion+0x0/0x1c) from [<c0368038>] (_request_firmware+0x1f4/0x3f4)
    [ 21.153198] [<c0367e44>] (_request_firmware+0x0/0x3f4) from [<c0368294>] (request_firmware_work_func+0x34/0x80)
    [ 21.153320] [<c0368260>] (request_firmware_work_func+0x0/0x80) from [<c00c97f0>] (kthread+0x90/0x94)
    [ 21.153442] r5:c7a50540 r4:c7833efc
    [ 21.153594] [<c00c9760>] (kthread+0x0/0x94) from [<c00abb28>] (do_exit+0x0/0x790)
    [ 21.153717] r6:c00abb28 r5:c00c9760 r4:c7833efc
    [ 24.855438] sr_class1p5_calib_work: core Stop sampling: Voltage Nominal=962000 samples=12
    [ 24.855926] sr_class1p5_calib_work: core: Calibration complete: Voltage:Nominal=962000 Calib=886240 margin=38000
    [ 24.856262] sr_class1p5_calib_work: mpu Stop sampling: Voltage Nominal=1025000 samples=12
    [ 24.856689] sr_class1p5_calib_work: mpu: Calibration complete: Voltage:Nominal=1025000 Calib=840000 margin=10000
    [ 31.152191] INFO: task firmware/hdcp.k:48 blocked for more than 10 seconds.
    [ 31.152282] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
    [ 31.152374] firmware/hdcp.k D c0652958 0 48 2 0x00000000
    [ 31.152587] Backtrace:
    [ 31.152709] [<c06526b8>] (__schedule+0x0/0x7e0) from [<c0652ee8>] (schedule+0x50/0x68)
    [ 31.152770] [<c0652e98>] (schedule+0x0/0x68) from [<c065365c>] (schedule_timeout+0x2c0/0x368)
    [ 31.152862] [<c065339c>] (schedule_timeout+0x0/0x368) from [<c0652538>] (wait_for_common+0xb4/0x170)
    [ 31.152984] [<c0652484>] (wait_for_common+0x0/0x170) from [<c065260c>] (wait_for_completion+0x18/0x1c)
    [ 31.153076] [<c06525f4>] (wait_for_completion+0x0/0x1c) from [<c0368038>] (_request_firmware+0x1f4/0x3f4)
    [ 31.153198] [<c0367e44>] (_request_firmware+0x0/0x3f4) from [<c0368294>] (request_firmware_work_func+0x34/0x80)
    [ 31.153320] [<c0368260>] (request_firmware_work_func+0x0/0x80) from [<c00c97f0>] (kthread+0x90/0x94)
    [ 31.153381] r5:c7a50540 r4:c7833efc
    [ 31.153594] [<c00c9760>] (kthread+0x0/0x94) from [<c00abb28>] (do_exit+0x0/0x790)
    [ 31.153656] r6:c00abb28 r5:c00c9760 r4:c7833efc
    [ 34.508850] Switching to rootfs...
    [ 35.236663] fsa9480 4-0025: cable detect change, from 'unknown/none' to 'usb-peripheral'
    [ 35.535369] systemd[1]: systemd 229 running in system mode. (-PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
    [ 35.536376] systemd[1]: Detected architecture arm.
    [ 35.539062] systemd[1]: Set hostname to <maguro>.
    [ 35.539611] systemd[1]: Initializing machine ID from random generator.
    [ 35.598602] systemd-fstab-generator[149]: Checking was requested for "rootfs", but it is not a device.
    [ 35.802429] systemd[1]: sensorfwd.service: Service has a D-Bus service name specified, but is not of type dbus. Ignoring.
    [ 35.836334] systemd[1]: Reached target Remote File Systems.
    [ 35.837066] systemd[1]: Listening on Syslog Socket.
    [ 35.837402] systemd[1]: Reached target Nyx target.
    [ 35.837829] systemd[1]: Listening on udev Kernel Socket.
    [ 35.838287] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 35.838867] systemd[1]: Listening on Journal Audit Socket.
    [ 35.839324] systemd[1]: Listening on Journal Socket.
    [ 35.839813] systemd[1]: Listening on udev Control Socket.
    [ 35.840270] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 35.841583] systemd[1]: Created slice User and Session Slice.
    [ 35.842010] systemd[1]: Listening on Journal Socket (/dev/log).
    [ 35.842468] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 35.842834] systemd[1]: Reached target Paths.
    [ 35.843109] systemd[1]: Reached target Swap.
    [ 35.843444] systemd[1]: Reached target Login Prompts.
    [ 35.844177] systemd[1]: Created slice System Slice.
    [ 35.848266] systemd[1]: Starting Load Kernel Modules...
    [ 35.851715] systemd[1]: Mounting Temporary Directory...
    [ 35.853088] systemd[1]: Created slice system-getty.slice.
    [ 35.856048] systemd[1]: Starting Setup Virtual Console...
    [ 35.859039] systemd[1]: Mounting Debug File System...
    [ 35.860382] misc memnotify: update period set to 250 ms or 32 jiffies
    [ 35.860412] systemd[1]: Created slice system-db8.slice.
    [ 35.860626] misc memnotify: update period limit set to 15000 ms or 1920 jiffies
    [ 35.860656] misc memnotify: update space set to 0 kb or -+1741 pages
    [ 35.860656] misc memnotify: 222886 available pages found (222886 ram + 0 swap)
    [ 35.860656] misc memnotify: 2806 used pages, utilization 1 percents
    [ 35.860687] misc memnotify: 1028 active pages, utilization 0 percents
    [ 35.860687] misc memnotify: 222886 total pages, utilization 100 percents
    [ 35.860717] misc memnotify: overhead per client connection is 32 bytes
    [ 35.864501] systemd[1]: Reached target Slices.
    [ 35.868225] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [ 35.870788] systemd[1]: Starting Journal Service...
    [ 35.873657] systemd[1]: Starting Remount Root and Kernel File Systems...
    [ 35.889739] systemd[1]: Mounted Debug File System.
    [ 35.890197] systemd[1]: Mounted Temporary Directory.
    [ 35.918273] PVR: PVRCore_Init
    [ 35.918548] PVR: LinuxMMInit: Maximum page pool size: 10800
    [ 35.918853] PVR: PVRSRVDriverProbe(pDevice=c78bb600)
    [ 35.918945] PVR: SGX register base: 0x56000000
    [ 35.919067] PVR: SGX register size: 65535
    [ 35.919128] PVR: SGX IRQ: 53
    [ 35.919433] PVR: EnableSystemClocks: Enabling System Clocks
    [ 35.919769] PVR: PVRCore_Init: major device 246
    [ 35.921081] systemd-journald[162]: Failed to register hostname fd in event loop, ignoring: Operation not permitted
    [ 35.946563] EXT4-fs (mmcblk0p12): re-mounted. Opts: (null)
    [ 35.949310] sr_class1p5_calib_work: core: Calibration complete: Voltage:Nominal=1250000 Calib=1025500 margin=13000
    [ 36.004394] systemd[1]: Started Setup Virtual Console.
    [ 36.199310] systemd[1]: Started Load Kernel Modules.
    [ 36.394622] systemd[1]: Started Create list of required static device nodes for the current kernel.
    [ 36.589874] systemd[1]: Started Remount Root and Kernel File Systems.
    [ 36.604064] systemd[1]: Started Journal Service.
    [ 36.862335] systemd-journald[162]: Received request to flush runtime journal from PID 1
    [ 39.409729] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
    [ 39.545593] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: (null)
    [ 39.609954] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: (null)
    [ 39.658538] EXT4-fs (mmcblk0p6): warning: mounting unchecked fs, running e2fsck is recommended
    [ 39.660614] EXT4-fs (mmcblk0p6): mounted filesystem without journal. Opts: (null)
    [ 41.152740] INFO: task firmware/hdcp.k:48 blocked for more than 10 seconds.
    [ 41.152832] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
    [ 41.152984] firmware/hdcp.k D c0652958 0 48 2 0x00000000
    [ 41.153259] Backtrace:
    [ 41.153533] [<c06526b8>] (__schedule+0x0/0x7e0) from [<c0652ee8>] (schedule+0x50/0x68)
    [ 41.153625] [<c0652e98>] (schedule+0x0/0x68) from [<c065365c>] (schedule_timeout+0x2c0/0x368)
    [ 41.153778] [<c065339c>] (schedule_timeout+0x0/0x368) from [<c0652538>] (wait_for_common+0xb4/0x170)
    [ 41.153961] [<c0652484>] (wait_for_common+0x0/0x170) from [<c065260c>] (wait_for_completion+0x18/0x1c)
    [ 41.154144] [<c06525f4>] (wait_for_completion+0x0/0x1c) from [<c0368038>] (_request_firmware+0x1f4/0x3f4)
    [ 41.154327] [<c0367e44>] (_request_firmware+0x0/0x3f4) from [<c0368294>] (request_firmware_work_func+0x34/0x80)
    [ 41.154449] [<c0368260>] (request_firmware_work_func+0x0/0x80) from [<c00c97f0>] (kthread+0x90/0x94)
    [ 41.154602] r5:c7a50540 r4:c7833efc
    [ 41.154937] [<c00c9760>] (kthread+0x0/0x94) from [<c00abb28>] (do_exit+0x0/0x790)
    [ 41.155029] r6:c00abb28 r5:c00c9760 r4:c7833efc
    [ 43.427246] systemd-fstab-generator[687]: Checking was requested for "rootfs", but it is not a device.
    [ 44.634399] systemd-fstab-generator[698]: Checking was requested for "rootfs", but it is not a device.
    [ 45.273498] android_usb: already disabled
    [ 45.425964] PVR_KError): BridgedDispatchKM: Driver initialisation not completed yet. [0, ]
    [ 46.360046] ls-hubd (730): /proc/808/oom_adj is deprecated, please use /proc/808/oom_score_adj instead.
    [ 49.398742] adb_open
    [ 49.398834] mtp_bind_config
    [ 49.398956] adb_bind_config
    [ 49.706970] android_work: sent uevent USB_STATE=CONNECTED
    [ 49.711578] android_work: sent uevent USB_STATE=DISCONNECTED
    [ 49.846893] android_work: sent uevent USB_STATE=CONNECTED
    [ 49.848052] android_usb gadget: high speed config #1: android
    [ 49.848236] android_work: sent uevent USB_STATE=CONFIGURED
    [ 50.246826] init: /init.cm.rc: 136: ignored duplicate definition of service 'bugreport'
    [ 50.247070] init: could not import file '/init.superuser.rc' from '/init.cm.rc'
    [ 50.652038] init: /dev/hw_random not found
    [ 50.652313] keychord: using input dev tuna-gpio-keypad for fevent
    [ 50.802612] init: /dev/hw_random not found
    [ 50.803283] fs_mgr: Unable to open zram conf device /sys/block/zram0/disksize
    [ 50.804016] init: cannot find '/system/bin/pvrsrvinit', disabling 'pvrsrvinit'
    [ 50.869354] init: cannot find '/system/bin/sysinit', disabling 'sysinit'
    [ 50.899200] init: cannot find '/system/bin/logd', disabling 'logd'
    [ 50.901489] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'
    [ 50.912109] binder: 995:995 transaction failed 29189, size 0-0
    [ 50.940612] init: cannot find '/system/bin/dumpdcc', disabling 'dumpdcc'
    [ 50.946258] adb_release
    [ 50.974914] adb_open
    [ 50.975891] mtp_bind_config
    [ 50.975982] adb_bind_config
    [ 51.182495] android_work: sent uevent USB_STATE=DISCONNECTED
    [ 51.303619] android_work: sent uevent USB_STATE=CONNECTED
    [ 51.308502] android_work: sent uevent USB_STATE=DISCONNECTED
    [ 51.444549] android_usb gadget: high speed config #1: android
    [ 51.445404] android_work: sent uevent USB_STATE=CONFIGURED
    [ 55.272918] binder: 1344:1344 transaction failed 29189, size 0-0
    [ 56.273071] binder: 1344:1344 transaction failed 29189, size 0-0

    The "binder" messege goes on an on.

    Can anybody help me?
    -----------------------------------------------------------------------------
    Daniel from Kranichfeld, Thüringen, Germay, Old Europe
  2. #2  
    I believe that Maguro development was abandoned due to the age of the device and the need for a more modern kernel.

    I too have a Maguro lying around and after my webos devices, it was my fave smartphone I used.

    Sent from my OPO awaiting LuneOS
    This space for rent or lease. Inquire within.
  3. #3  
    I believe that Maguro development was abandoned due to the age of the device and the need for a more modern kernel.

    I too have a Maguro lying around and after my webos devices, it was my fave smartphone I used.

    Sent from my OPO awaiting LuneOS
    It was stuck at a 3.0 kernel last time I checked. If there's a stable 3.4 kernel (maybe Unlegacy Android guys have it by now?) it shouldn't be too hard to bring it back to life.


    -- Sent from my TouchPad using Communities
    HP Veer (daily driver), HP Pre 3, HP Touchpad Proper 4G/LTE (Sierra MC7710), HP Touchpad 32GB WiFi, Palm Pre 2
  4. #4  
    Quote Originally Posted by Herrie View Post
    It was stuck at a 3.0 kernel last time I checked. If there's a stable 3.4 kernel (maybe Unlegacy Android guys have it by now?) it shouldn't be too hard to bring it back to life.


    -- Sent from my TouchPad using Communities
    Unlegacy is still at 3.0.x from my understanding.

    Unfortunately, modern Maguro ROMs (lollipop and up) almost universally appear to use 3.0.x kernels.

    I do recall that a number of jelly bean and kit kat android custom ROMs did come with 3.4 kernels and that there were certainly some standalone 3.4.x kernels as well. I recall using this one for JB 4.3

    XDA https://forum.xda-developers.com/sho....php?t=2315721

    GIT: https://github.com/Christopher83/sam...0/tree/cm-10.2

    In any event, keep up the good work! Been reading about all the work using halium etc. Looks super promising....

    Sent from my OPO awaiting LuneOS
    This space for rent or lease. Inquire within.
  5.    #5  
    Webos Ports writes on its Webpage that Latest LuneOS version for Maguro is ColdBrew from 30 Apr 2017. See Maguro Info - WebOS-Ports
    But it dont came to life after successfull installation.
    -----------------------------------------------------------------------------
    Daniel from Kranichfeld, Thüringen, Germay, Old Europe
  6.    #6  
    Webos Ports writes on its Webpage that Latest LuneOS version for Maguro is ColdBrew from 30 Apr 2017. See Maguro Info - WebOS-Ports
    But it dont came to life after successfull installation.
    -----------------------------------------------------------------------------
    Daniel from Kranichfeld, Thüringen, Germay, Old Europe
  7. #7  
    Quote Originally Posted by MudShark22 View Post
    Sent from my OPO awaiting LuneOS
    https://forums.webosnation.com/webos...ml#post3453685
  8. #8  
    Quote Originally Posted by davodego View Post
    Webos Ports writes on its Webpage that Latest LuneOS version for Maguro is ColdBrew from 30 Apr 2017. See Maguro Info - WebOS-Ports
    But it dont came to life after successfull installation.
    I will test on my maguro when i get home. I believe the version before that is the last that was 'working' as an alpha. ChaiLatte?

    - T

    Sent from my OPO awaiting LuneOS
    This space for rent or lease. Inquire within.

Similar Threads

  1. ROS2 on WebOS
    By ggendel in forum Open webOS General Discussion
    Replies: 2
    Last Post: 07/04/2018, 07:08 AM
  2. Replies: 0
    Last Post: 06/27/2018, 09:45 AM
  3. LG webos remote app crashing randomly on my s7
    By craigomez in forum webOS Apps & Games
    Replies: 1
    Last Post: 06/27/2018, 01:58 AM
  4. Put my unused Pre3 on eBay
    By desertflyer in forum HP Pre 3
    Replies: 4
    Last Post: 06/22/2018, 09:44 AM
  5. Replies: 4
    Last Post: 06/02/2018, 08:47 PM

Posting Permissions