Ipk Deployment:550/600 MHz LunaSysMgr and WebOS 1.4.1.1 720/800 MHz Kernels - Page 6

Shadavis08 · 04/05/2010, 11:35 AM

Quote:

Originally Posted by Intlstyle

Processor : ARMv7 Processor rev 3 (v7l)
BogoMIPS : 796.91

that's correct what did you do to fix ??

Shadavis08 · 04/05/2010, 11:38 AM

Quote:

Originally Posted by booyapre

@PastorRich
I'm wondering the same thing since I have the "old" 720 .sh patch installed... but it sounds like it's the exact same thing, except in ipk form...
not sure why the instructions start with uninstalling .sh file and using the ipk but with the issues being reported, I'll just stick with the .sh since it is definitely working and isn't different than the ipk...

CAJ-- hope you get some good sleep and enjoy a nice spring break away from all of this... thanks again for your work!

yes its the same kernel in ipk form

Intlstyle · 04/05/2010, 11:40 AM

Quote:

Originally Posted by Shadavis08

that's correct what did you do to fix ??

I rebooted everything again and installed with the IPK with WOSQI and poof it all worked very well....

now just a battery issue

PreBot · 04/05/2010, 11:51 AM

installed 800mhz patch on Bell's 1.4.1

root@palm-webos-device: ls /var/home/root
ockernel-bak.tar

michael.schumacker · 04/05/2010, 11:51 AM

I have the same issue using the 800MHz script, will upload screenshot of execution.

panchala · 04/05/2010, 11:53 AM

ockernel-bak.tar

Shadavis08 · 04/05/2010, 11:58 AM

[QUOTE=michael.schumacker;2360229]I have the same issue using the 800MHz script, will upload screenshot of execution.

[IMG] [IMG]

use webos QI please it is the recommended way to install thanks

PreBot · 04/05/2010, 11:59 AM

remove battery while phone is on?
then press on/off twice while battery is out?

Shadavis08 · 04/05/2010, 12:03 PM

Quote:

Originally Posted by PreBot

remove battery while phone is on?
then press on/off twice while battery is out?

no . After reinserting battery restart phone twice lol then check speed

panchala · 04/05/2010, 12:04 PM

already tried that but it still has same issues

estockda · 04/05/2010, 12:05 PM

I'm having issues trying to download the ipk's. Media Fire says the files are private.

michael.schumacker · 04/05/2010, 12:06 PM

Quote:

Originally Posted by caj2008

600 MHz club (but not wanting to join):

Experiment 1:

OK. Dont uninstall yet . Remove battery, Power off/on twice and then remeasure speed (any of the 3 methods)

Report

Battery pulled and powercycled twice, still at 600.

panchala · 04/05/2010, 12:07 PM

ok, will take a while since this phone takes FOREVER to restart

Shadavis08 · 04/05/2010, 12:09 PM

that's because people are having issues with these right now and obviously don't know what's going on and some have not even read the directions and are having trouble with installation and troubleshooting . So the ipk's are temp disabled

zepnik · 04/05/2010, 12:10 PM

thanx!!!

PreBot · 04/05/2010, 12:10 PM

still at 600 for me

michael.schumacker · 12:16 PM

OK, here is what I intend to do:

Uninstall 800MHzOS14.sh with WOSQI

Code:

root@palm-webos-device: ls /var/home/root/
  800MHzOS14.sh
  ockernel-bak.tar
root@palm-webos-device: sh /var/home/root/800MHzOS14.sh uninstall
  boot/uImage-2.6.24-palm-joplin-3430
  lib/modules/2.6.24-palm-joplin-3430/
  lib/modules/2.6.24-palm-joplin-3430/kernel/
  lib/modules/2.6.24-palm-joplin-3430/kernel/net/
  lib/modules/2.6.24-palm-joplin-3430/kernel/net/wifi/
  lib/modules/2.6.24-palm-joplin-3430/kernel/net/wifi/uap8xxx.ko
  lib/modules/2.6.24-palm-joplin-3430/kernel/net/wifi/sd8xxx.ko
  lib/modules/2.6.24-palm-joplin-3430/kernel/drivers/
  lib/modules/2.6.24-palm-joplin-3430/kernel/drivers/net/
  lib/modules/2.6.24-palm-joplin-3430/kernel/drivers/net/ifb.ko
  lib/modules/2.6.24-palm-joplin-3430/kernel/drivers/block/
  lib/modules/2.6.24-palm-joplin-3430/kernel/drivers/block/nbd.ko
  lib/modules/2.6.24-palm-joplin-3430/kernel/drivers/scsi/
  lib/modules/2.6.24-palm-joplin-3430/kernel/drivers/scsi/scsi_wait_scan.ko
  lib/modules/2.6.24-palm-joplin-3430/kernel/crypto/
  lib/modules/2.6.24-palm-joplin-3430/kernel/crypto/ecb.ko
  lib/modules/2.6.24-palm-joplin-3430/kernel/crypto/pcbc.ko
  lib/modules/2.6.24-palm-joplin-3430/kernel/arch/
  lib/modules/2.6.24-palm-joplin-3430/kernel/arch/arm/
  lib/modules/2.6.24-palm-joplin-3430/kernel/arch/arm/oprofile/
  lib/modules/2.6.24-palm-joplin-3430/kernel/arch/arm/oprofile/oprofile.ko
  lib/modules/2.6.24-palm-joplin-3430/drivers/
  lib/modules/2.6.24-palm-joplin-3430/drivers/misc/
  lib/modules/2.6.24-palm-joplin-3430/drivers/misc/exmap.ko
  lib/modules/2.6.24-palm-joplin-3430/modules.inputmap
  lib/modules/2.6.24-palm-joplin-3430/modules.seriomap
  lib/modules/2.6.24-palm-joplin-3430/modules.pcimap
  lib/modules/2.6.24-palm-joplin-3430/dspbridge/
  lib/modules/2.6.24-palm-joplin-3430/dspbridge/bridgedriver.ko
  lib/modules/2.6.24-palm-joplin-3430/modules.symbols
  lib/modules/2.6.24-palm-joplin-3430/modules.isapnpmap
  lib/modules/2.6.24-palm-joplin-3430/modules.dep
  lib/modules/2.6.24-palm-joplin-3430/modules.ofmap
  lib/modules/2.6.24-palm-joplin-3430/modules.alias
  lib/modules/2.6.24-palm-joplin-3430/modules.ieee1394map
  lib/modules/2.6.24-palm-joplin-3430/modules.ccwmap
  lib/modules/2.6.24-palm-joplin-3430/modules.usbmap
  lib/modules/2.6.24-palm-joplin-3430/tisgxgfx/
  lib/modules/2.6.24-palm-joplin-3430/tisgxgfx/bc_example.ko
  lib/modules/2.6.24-palm-joplin-3430/tisgxgfx/omaplfb.ko
  lib/modules/2.6.24-palm-joplin-3430/tisgxgfx/pvrsrvkm.ko
  usr/bin/LunaSysMgr
  etc/event.d/PmNetConfigManager
  Rebooting...
root@palm-webos-device:

Power cycle x2

Check cpuinfo

Code:

root@palm-webos-device: cat /proc/cpuinfo
  Processor	: ARMv7 Processor rev 3 (v7l)
  BogoMIPS	: 498.07
  Features	: swp half thumb fastmult vfp edsp

Install 800MHzOS14.sh with WOSQI

Code:

root@palm-webos-device: ls /var/home/root
  800MHzOS14.sh
root@palm-webos-device: sh /var/home/root/800MHzOS14.sh install
  tar: Removing leading `/' from member names
  crypto/ecb.ko
  crypto/pcbc.ko
  drivers/block/nbd.ko
  tar: Skipping to next header
  tar: A lone zero block at 952
  tar: Error exit delayed from previous errors
  cp: cannot stat 'arch/arm/boot/uImage': No such file or directory
  Rebooting...
root@palm-webos-device:

Power cycle x2

Check cpuinfo

Code:

root@palm-webos-device: cat /proc/cpuinfo
  Processor	: ARMv7 Processor rev 3 (v7l)
  BogoMIPS	: 597.68
  Features	: swp half thumb fastmult vfp edsp

krispy521 · 04/05/2010, 12:11 PM

Quote:

Originally Posted by Shadavis08

use this and tell me what you get--- cat /proc/cpuinfo then hit enter note the space after cat

I get:

597.68

R00tM0nk · 04/05/2010, 12:12 PM

Just for balance: installed the ipkg 800 Mhz file: went like a charm, running great.

Never used a CPU scaling package, just the 800 Mhz shell file, and uninstalled that before upgrading to 1.4.1.

Shadavis08 · 04/05/2010, 12:12 PM

Quote:

Originally Posted by michael.schumacker

Battery pulled and powercycled twice, still at 600.

now uninstall power down phone and power up check speed then reinstall kernel and power off then on even if phone reboots self. Then check speed again

04/05/2010, 11:51 AM	#104 (permalink)
PreBot Member Join Date: Jun 2009 Posts: 65 Likes Received: 3 Thanks: 0 Thanked 6 Times in 6 Posts	installed 800mhz patch on Bell's 1.4.1 root@palm-webos-device: ls /var/home/root ockernel-bak.tar
	Liked by

04/05/2010, 11:51 AM	#105 (permalink)
michael.schumacker Homebrew Developer Join Date: Dec 2009 Posts: 84 Likes Received: 0 Thanks: 7 Thanked 24 Times in 12 Posts	I have the same issue using the 800MHz script, will upload screenshot of execution.
	Liked by

04/05/2010, 11:53 AM	#106 (permalink)
panchala Member Join Date: Aug 2009 Posts: 34 Likes Received: 0 Thanks: 0 Thanked 1 Time in 1 Post	ockernel-bak.tar
	Liked by

04/05/2010, 11:58 AM	#107 (permalink)
Shadavis08 Member Join Date: Aug 2009 Location: Ї Ƈøṁε ℉яøṁ ṫɦε ℓαη∂ øḟ ṫɦε øḟḟ ṫø℘ḯ¢ !! NOW BACK OFF !! ltm ltm ltm Posts: 9,127 Likes Received: 70 Thanks: 2,261 Thanked 2,792 Times in 2,201 Posts	[QUOTE=michael.schumacker;2360229]I have the same issue using the 800MHz script, will upload screenshot of execution. [IMG] [IMG] use webos QI please it is the recommended way to install thanks __________________ ĦṔ-ḶøØṫ-ŦḯØη Here is a direct link to webOS Doc for all carriers http://www.webos-internals.org/wiki/...octor_Versions P.S. if i have helped you and you are thankful please hit the thanks button to the right---->
	Liked by

04/05/2010, 11:59 AM	#108 (permalink)
PreBot Member Join Date: Jun 2009 Posts: 65 Likes Received: 3 Thanks: 0 Thanked 6 Times in 6 Posts	remove battery while phone is on? then press on/off twice while battery is out?
	Liked by

04/05/2010, 12:04 PM	#110 (permalink)
panchala Member Join Date: Aug 2009 Posts: 34 Likes Received: 0 Thanks: 0 Thanked 1 Time in 1 Post	already tried that but it still has same issues
	Liked by

04/05/2010, 12:05 PM	#111 (permalink)
estockda Member Join Date: Jun 2009 Posts: 84 Likes Received: 0 Thanks: 17 Thanked 119 Times in 13 Posts	I'm having issues trying to download the ipk's. Media Fire says the files are private.
	Liked by

04/05/2010, 12:07 PM	#113 (permalink)
panchala Member Join Date: Aug 2009 Posts: 34 Likes Received: 0 Thanks: 0 Thanked 1 Time in 1 Post	ok, will take a while since this phone takes FOREVER to restart
	Liked by

04/05/2010, 12:09 PM	#114 (permalink)
Shadavis08 Member Join Date: Aug 2009 Location: Ї Ƈøṁε ℉яøṁ ṫɦε ℓαη∂ øḟ ṫɦε øḟḟ ṫø℘ḯ¢ !! NOW BACK OFF !! ltm ltm ltm Posts: 9,127 Likes Received: 70 Thanks: 2,261 Thanked 2,792 Times in 2,201 Posts	that's because people are having issues with these right now and obviously don't know what's going on and some have not even read the directions and are having trouble with installation and troubleshooting . So the ipk's are temp disabled __________________ ĦṔ-ḶøØṫ-ŦḯØη Here is a direct link to webOS Doc for all carriers http://www.webos-internals.org/wiki/...octor_Versions P.S. if i have helped you and you are thankful please hit the thanks button to the right---->
	Liked by

04/05/2010, 12:10 PM	#115 (permalink)
zepnik Member Join Date: Dec 2007 Location: Israel Posts: 29 Likes Received: 1 Thanks: 18 Thanked 3 Times in 3 Posts	thanx!!! __________________ Pilot 1000> Palm Pilot Personal> Palm III >Palm V> Palm Vx> Palm m505> Palm m515> Tungsten T> Tungsten T2> Tungsten T3> Treo 680> Palm Pre> Pre2> Pre3+Touchpad 32GB
	Liked by

04/05/2010, 12:10 PM	#116 (permalink)
PreBot Member Join Date: Jun 2009 Posts: 65 Likes Received: 3 Thanks: 0 Thanked 6 Times in 6 Posts	still at 600 for me
	Liked by

04/05/2010, 12:12 PM	#119 (permalink)
R00tM0nk Member Join Date: Oct 2009 Location: Netherlands Posts: 145 Likes Received: 0 Thanks: 2 Thanked 10 Times in 8 Posts	not all having issues Just for balance: installed the ipkg 800 Mhz file: went like a charm, running great. Never used a CPU scaling package, just the 800 Mhz shell file, and uninstalled that before upgrading to 1.4.1.
	Liked by Thanked By: Shadavis08

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode