Ipk Deployment:550/600 MHz LunaSysMgr and WebOS 1.4.1.1 720/800 MHz Kernels - Page 3

stu5797 · 04/05/2010, 10:13 AM

The 800mhz patch is amazing! Can I also download the 600 luna system manager?
Do they go hand in hand?
Thanks

krispy521 · 04/05/2010, 10:15 AM

Quote:

Originally Posted by mikeh20

Well after several attempts...im still reporting 600 after installing 720.

started with stock 500, ipk install 720, got the error, phone restarted on own, did a full shut down once back on, checked speed in linux--600 reported.

uninstalled and reinstalled ipk with same result. Am i missing something?

I've done it twice now. If i remove the patch. My speed goes back to 500. Then I reinstall. It shows in device management that the 800 MHz patch is installed, but when I do a speed test. I'm at 600.

And the phone isn't very fast like it was with the 800MHz.sh file. Something must be wrong.

scout2guy74 · 04/05/2010, 10:17 AM

Quote:

Originally Posted by jdworsky

Same here. I thought maybe there was something wrong with the 720 IPK, so I uninstalled via directions, including full on/off, confirmed 500MHz, installed the 800MHz version, and after several reboots, still get 600MHZ in WOSQI command line.

Any suggestions would be appreciated.

Joe

Same problem here, I tried to install both the 720 and 800 patches and both times the it is getting a report of 600MHZ in the command line.

onemadrssn · 04/05/2010, 10:25 AM

caj2008 - Stunning work as always. Can you please PM me your donate link, as I do not have 10 posts yet on this forum, and therefor cannot view signature links. Thanks.

ujsc · 04/05/2010, 10:28 AM

Quote:

Originally Posted by rwhitby

FYI: I just did a review of these packages (only just saw them for the first time).

The only thing I noticed is that the post-install script is not idempotent, so it will fail when called from the Emergency Service Enabler utility. Not a big issue, but just something for folks writing post-install scripts to watch out for. A post-install script should be able to be run multiple times, and each time should result in the same final state irrespective of whether it has been run before or not.

BTW, we have unofficial word from a contact in Palm that he was not aware of any kernel changes from 1.4.0 to 1.4.1 ... but the same contact also confirmed the expected reduction in device lifetime resulting from running the device above 600MHz ...

-- Rod

said the man with an agenda

FuManChuu · 04/05/2010, 10:31 AM

Quote:

Originally Posted by ujsc

said the man with an agenda

haha... agenda or not, the studies have been done... the impact is real (at least in the aggregate). Now, that doesn't change my choices... but maybe it will when I brick and have to wait on a replacement D;

cawkblocker · 04/05/2010, 10:32 AM

Quote:

Originally Posted by jdworsky

Same here. I thought maybe there was something wrong with the 720 IPK, so I uninstalled via directions, including full on/off, confirmed 500MHz, installed the 800MHz version, and after several reboots, still get 600MHZ in WOSQI command line.

Any suggestions would be appreciated.

Joe

Same thing happened with me, I wonder if something got mixed up

EDIT: also did cat /proc/cpuinfo and BogoMIPS was 597.68

glycerine102 · 04/05/2010, 10:35 AM

Quote:

Originally Posted by cawkblocker

Same thing happened with me, I wonder if something got mixed up

Same here with the 800. I uninstalled, and tried it all again and received the same 600 mghz reading.

mikeh20 · 04/05/2010, 10:37 AM

I could see myslef screwing this up somehow and getting the 600 reading (when installing 720) but it seems like 80+% of people are reporting the same thing...hmmm...???

Stevesrjr86 · 04/05/2010, 10:42 AM

wow this is definitely smoother than it was on 1.4.1... i know its just the same kernal as was used in the 1.4 .sh but damn it flys now!!!

ps.. when i check my it speed says 800.. not sure why others are running into problems..

Shadavis08 · 04/05/2010, 10:49 AM

what are you putting into command line to check speed ? Type it out here pleas ?!

Shadavis08 · 04/05/2010, 10:51 AM

Quote:

Originally Posted by ujsc

said the man with an agenda

what's his agenda is the question ?

krispy521 · 04/05/2010, 10:51 AM

cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq

and this is what i get:

root@palm-webos-device: cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq
600000
root@palm-webos-device:

mikeh20 · 04/05/2010, 10:51 AM

cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq

Intlstyle · 04/05/2010, 10:53 AM

i think i have a bigger issue i ran the uninstall on my phone for 800mhz and now i dont get just charge or usb mode, i had the just charge by default patch installed i removed it and rebooted and nothing.

i can not connect to WOSQI and im not sure what version of DR i have.

and the battery life is drained to 20% in 2hours no usage other than running the uninstall

Shadavis08 · 04/05/2010, 10:57 AM

use this and tell me what you get--- cat /proc/cpuinfo then hit enter note the space after cat

michael.schumacker · 04/05/2010, 10:57 AM

cat /proc/cpuinfo

And I get 597.68, with the 800 patch.

cawkblocker · 04/05/2010, 10:58 AM

Quote:

Originally Posted by krispy521

cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq

and this is what i get:

root@palm-webos-device: cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq
600000
root@palm-webos-device:

this. and also

Quote:

root@palm-webos-device: cat /proc/cpuinfo
Processor : ARMv7 Processor rev 3 (v7l)
BogoMIPS : 597.68

Budgetmedic · 04/05/2010, 10:59 AM

I am having the same issue now.

Rebooting my computer as we speak o see if that fixes anything.

I don't have the just charge by default patch though.

Quote:

Originally Posted by Intlstyle

i think i have a bigger issue i ran the uninstall on my phone for 800mhz and now i dont get just charge or usb mode, i had the just charge by default patch installed i removed it and rebooted and nothing.

i can not connect to WOSQI and im not sure what version of DR i have.

and the battery life is drained to 20% in 2hours no usage other than running the uninstall

Shadavis08 · 04/05/2010, 10:59 AM

Quote:

Originally Posted by Intlstyle

i think i have a bigger issue i ran the uninstall on my phone for 800mhz and now i dont get just charge or usb mode, i had the just charge by default patch installed i removed it and rebooted and nothing.

i can not connect to WOSQI and im not sure what version of DR i have.

and the battery life is drained to 20% in 2hours no usage other than running the uninstall

you need to unplug phone while its rebooting othwise this happens . Its the novacom driver . Reboot phone and computer

04/05/2010, 10:13 AM	#41 (permalink)
stu5797 Member Join Date: Dec 2009 Location: Cleveland, Ohio Posts: 1,627 Likes Received: 27 Thanks: 161 Thanked 196 Times in 87 Posts	The 800mhz patch is amazing! Can I also download the 600 luna system manager? Do they go hand in hand? Thanks
	Liked by

04/05/2010, 10:25 AM	#44 (permalink)
onemadrssn Member Join Date: Aug 2009 Location: MA Posts: 90 Likes Received: 0 Thanks: 9 Thanked 8 Times in 8 Posts	caj2008 - Stunning work as always. Can you please PM me your donate link, as I do not have 10 posts yet on this forum, and therefor cannot view signature links. Thanks.
	Liked by

04/05/2010, 10:37 AM	#49 (permalink)
mikeh20 Member Join Date: Feb 2009 Posts: 224 Likes Received: 0 Thanks: 76 Thanked 52 Times in 19 Posts	I could see myslef screwing this up somehow and getting the 600 reading (when installing 720) but it seems like 80+% of people are reporting the same thing...hmmm...???
	Liked by

04/05/2010, 10:42 AM	#50 (permalink)
Stevesrjr86 Member Join Date: Sep 2009 Location: Mile High City Posts: 754 Likes Received: 39 Thanks: 61 Thanked 113 Times in 79 Posts	wow this is definitely smoother than it was on 1.4.1... i know its just the same kernal as was used in the 1.4 .sh but damn it flys now!!! ps.. when i check my it speed says 800.. not sure why others are running into problems..
	Liked by

04/05/2010, 10:49 AM	#51 (permalink)
Shadavis08 Member Join Date: Aug 2009 Location: Ї Ƈøṁε ℉яøṁ ṫɦε ℓαη∂ øḟ ṫɦε øḟḟ ṫø℘ḯ¢ !! NOW BACK OFF !! ltm ltm ltm Posts: 9,127 Likes Received: 70 Thanks: 2,261 Thanked 2,792 Times in 2,201 Posts	what are you putting into command line to check speed ? Type it out here pleas ?! __________________ ĦṔ-ḶøØṫ-ŦḯØη Here is a direct link to webOS Doc for all carriers http://www.webos-internals.org/wiki/...octor_Versions P.S. if i have helped you and you are thankful please hit the thanks button to the right---->
	Liked by

04/05/2010, 10:51 AM	#53 (permalink)
krispy521 Member Join Date: Sep 2009 Location: Nashua, NH Posts: 93 Likes Received: 0 Thanks: 98 Thanked 8 Times in 7 Posts	cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq and this is what i get: root@palm-webos-device: cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq 600000 root@palm-webos-device:
	Liked by

04/05/2010, 10:51 AM	#54 (permalink)
mikeh20 Member Join Date: Feb 2009 Posts: 224 Likes Received: 0 Thanks: 76 Thanked 52 Times in 19 Posts	cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq
	Liked by

04/05/2010, 10:53 AM	#55 (permalink)
Intlstyle Member Join Date: Jul 2009 Posts: 88 Likes Received: 0 Thanks: 54 Thanked 1 Time in 1 Post	i think i have a bigger issue i ran the uninstall on my phone for 800mhz and now i dont get just charge or usb mode, i had the just charge by default patch installed i removed it and rebooted and nothing. i can not connect to WOSQI and im not sure what version of DR i have. and the battery life is drained to 20% in 2hours no usage other than running the uninstall
	Liked by

04/05/2010, 10:57 AM	#56 (permalink)
Shadavis08 Member Join Date: Aug 2009 Location: Ї Ƈøṁε ℉яøṁ ṫɦε ℓαη∂ øḟ ṫɦε øḟḟ ṫø℘ḯ¢ !! NOW BACK OFF !! ltm ltm ltm Posts: 9,127 Likes Received: 70 Thanks: 2,261 Thanked 2,792 Times in 2,201 Posts	use this and tell me what you get--- cat /proc/cpuinfo then hit enter note the space after cat __________________ ĦṔ-ḶøØṫ-ŦḯØη Here is a direct link to webOS Doc for all carriers http://www.webos-internals.org/wiki/...octor_Versions P.S. if i have helped you and you are thankful please hit the thanks button to the right---->
	Liked by

04/05/2010, 10:57 AM	#57 (permalink)
michael.schumacker Homebrew Developer Join Date: Dec 2009 Posts: 84 Likes Received: 0 Thanks: 7 Thanked 24 Times in 12 Posts	cat /proc/cpuinfo And I get 597.68, with the 800 patch.
	Liked by

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode