Official webOS 1.4.1 Issues Thread - Page 2

**bevcraw** · 03/31/2010, 09:40 PM

Quote:

Originally Posted by IlyaK

I installed all the patches...there isn't any more waiting for updates...but my phone still looks stock after lunar restarts and full restarts. ***?

All my patch updates are placeholders. Probably yours too. The patches will be updated soon and you'll be prompted through Preware to update them.

IlyaK · 03/31/2010, 09:43 PM

Even if I've already 'updated' them? They are no longer showing as waiting for updates...I didn't realize they were placeholders until I checked the thread(s) again.

tlower · 03/31/2010, 09:43 PM

Patience is virtue! Give them a little time and they will work once again.

starkillers · 03/31/2010, 09:43 PM

still no blinking notifications after missed call

**bevcraw** · 03/31/2010, 09:44 PM

Quote:

Originally Posted by IlyaK

Even if I've already 'updated' them? They are no longer showing as waiting for updates...I didn't realize they were placeholders until I checked the thread(s) again.

This is the same way it worked with the 1.4 update. It took a few days for all my placeholders to be replaced with updated patches.

fastamx79 · 03/31/2010, 09:50 PM

Quote:

Originally Posted by Menace187

I'm not, haven't installed it yet cause I'm waiting to see if it will work with my 800 patch, I was talking about yous guys having issues already lol

lol... I can dig it

netwrkr9 · 03/31/2010, 09:52 PM

Maybe it's good that everyone goes a little while without patches to appreciate all of the hard work the Preware developers have put in to make our Pre's better fit our needs.

fastamx79 · 03/31/2010, 09:53 PM

All of my patches that didn't make it were updated to place holders.. now I see an update in preware of all my patches showing an update.. I'm downloading now and i assume they have fixed them. If that is the case then a HUGE hazzha towards the internals team is in order!!

sstlthy · 03/31/2010, 09:55 PM

Uh oh, I updated leaving 800 overclocking in. Seems to be working fine though so far. I'll check this evening to see whether I'm still in 800 mode.

griffoun · 03/31/2010, 09:55 PM

Quote:

Originally Posted by Pre1

Busted engadget app, wont load. anyone else?

Yup, it's not working on mine either. (Sprint, v1.4.1.1)

fastamx79 · 10:02 PM

and just like that my patches are working now (except for the time duration patch for Sprint) but I have faith it will be back up and running shortly!!

MAJOR KUDOS TO webosinternals!!!!!!!

--edit--

looks like the duration patch is now there!

God bless the internals team!! Never missing a beat!!

yungblu904 · 03/31/2010, 10:01 PM

How do i remove the overclocking patch (800Mhz)?

fastamx79 · 03/31/2010, 10:01 PM

Quote:

Originally Posted by netwrkr9

Maybe it's good that everyone goes a little while without patches to appreciate all of the hard work the Preware developers have put in to make our Pre's better fit our needs.

QFT!!!!

Excal · 03/31/2010, 10:02 PM

I was just checking out the Football app and put my phone down for a minute and it locked. So I hit the power/unlock button to get it to come back up and it restarted on me. ;/

dfine1966 · 03/31/2010, 10:02 PM

Quote:

Originally Posted by Pre1

Busted engadget app, wont load. anyone else?

Same with me, engadget app won't load..

fastamx79 · 03/31/2010, 10:03 PM

Quote:

Originally Posted by Excal

I was just checking out the Football app and put my phone down for a minute and it locked. So I hit the power/unlock button to get it to come back up and it restarted on me. ;/

I've tried loading that app too and I keep getting 'network timeout error' even though everything else using Ev runs fine. Who knows

Excal · 03/31/2010, 10:05 PM

Quote:

Originally Posted by fastamx79

I've tried loading that app too and I keep getting 'network timeout error' even though everything else using Ev runs fine. Who knows

It loaded fine for me, it was just when I tried to unlock the phone the whole phone restarted.

fastamx79 · 03/31/2010, 10:05 PM

Quote:

Originally Posted by yungblu904

How do i remove the overclocking patch (800Mhz)?

I'm quoting a user in a differnt post.. I'm not sure who did it so if you see this then let me know so I can give thanks =)

Quote:

Go into WebOS Quick Install / Tools / Linux Commandline and type
sh /var/home/root/800MHzOS14.sh uninstall

Then do a full shutdown and restart then go to Tools / Delete File/Directory and put /var/home/root/800MHzOS14.sh in the path to remove the remnants.

fastamx79 · 03/31/2010, 10:06 PM

Quote:

Originally Posted by Excal

It loaded fine for me, it was just when I tried to unlock the phone the whole phone restarted.

I just checked again since I've been doing a lot of restarts for updating patches and the error I get says "Can't connect to the server - try again later"

Nihao · 03/31/2010, 10:09 PM

Quote:

Originally Posted by yungblu904

How do i remove the overclocking patch (800Mhz)?

Use WOSQI Tools - In Linux Command Line, write:

sh /var/home/root/800MHzOS14.sh uninstall

03/31/2010, 09:43 PM	#22 (permalink)
IlyaK Member Join Date: Jul 2009 Location: Albany, NY Posts: 224 Likes Received: 0 Thanks: 14 Thanked 19 Times in 16 Posts	Even if I've already 'updated' them? They are no longer showing as waiting for updates...I didn't realize they were placeholders until I checked the thread(s) again. __________________ Palm Pre \| WebOS 1.4.1.1 \| Sprint My CarDomain - 5/30/09
	Liked by

03/31/2010, 09:43 PM	#23 (permalink)
tlower Member Join Date: Oct 2009 Posts: 64 Likes Received: 0 Thanks: 12 Thanked 8 Times in 7 Posts	Patience is virtue! Give them a little time and they will work once again.
	Liked by

03/31/2010, 09:43 PM	#24 (permalink)
starkillers Member Join Date: Jun 2009 Posts: 43 Likes Received: 0 Thanks: 1 Thanked 0 Times in 0 Posts	still no blinking notifications after missed call
	Liked by

03/31/2010, 09:52 PM	#27 (permalink)
netwrkr9 Member Join Date: Nov 2009 Posts: 3,132 Likes Received: 154 Thanks: 453 Thanked 495 Times in 364 Posts	Maybe it's good that everyone goes a little while without patches to appreciate all of the hard work the Preware developers have put in to make our Pre's better fit our needs.
	Liked by Thanked by Dem0s, igobytony, Menace187, RafRol, THAANSA3, zenaa96

03/31/2010, 09:53 PM	#28 (permalink)
fastamx79 Member Join Date: Aug 2009 Location: Chicago, IL / Sioux Falls, SD Posts: 366 Likes Received: 0 Thanks: 46 Thanked 47 Times in 40 Posts	All of my patches that didn't make it were updated to place holders.. now I see an update in preware of all my patches showing an update.. I'm downloading now and i assume they have fixed them. If that is the case then a HUGE hazzha towards the internals team is in order!!
	Liked by

03/31/2010, 09:55 PM	#29 (permalink)
sstlthy Member Join Date: Jul 2005 Location: Merced, CA Posts: 42 Likes Received: 0 Thanks: 1 Thanked 0 Times in 0 Posts	Uh oh, I updated leaving 800 overclocking in. Seems to be working fine though so far. I'll check this evening to see whether I'm still in 800 mode.
	Liked by

03/31/2010, 09:58 PM	#31 (permalink)
fastamx79 Member Join Date: Aug 2009 Location: Chicago, IL / Sioux Falls, SD Posts: 366 Likes Received: 0 Thanks: 46 Thanked 47 Times in 40 Posts	and just like that my patches are working now (except for the time duration patch for Sprint) but I have faith it will be back up and running shortly!! MAJOR KUDOS TO webosinternals!!!!!!! --edit-- looks like the duration patch is now there! God bless the internals team!! Never missing a beat!! Last edited by fastamx79; 03/31/2010 at 10:02 PM. Reason: oops
	Liked by

03/31/2010, 10:01 PM	#32 (permalink)
yungblu904 Member Join Date: May 2009 Location: Florida Posts: 20 Likes Received: 0 Thanks: 2 Thanked 1 Time in 1 Post	How do i remove the overclocking patch (800Mhz)?
	Liked by

03/31/2010, 10:02 PM	#34 (permalink)
Excal Member Join Date: Jan 2010 Posts: 35 Likes Received: 0 Thanks: 0 Thanked 4 Times in 3 Posts	I was just checking out the Football app and put my phone down for a minute and it locked. So I hit the power/unlock button to get it to come back up and it restarted on me. ;/
	Liked by

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode