[B]Optimized WebOS 1.4 Kernel Video/WOSQI 720Mhz/800 MHz Easy Install. [/B]

[xtn]

Originally Posted by pastorrich1

Is the new 1.4.1.1 Kernel at 600MHz?

As has been discussed several times... You will always see 600 when using terminus, because terminus itself causes the speed to change to 600 while it is running.

[pastorrich1]

Originally Posted by mjkjr

No, this has been answered about 10 times, lol. Check from webOS QI and it will show you 500. Terminus speeds the processor up to 600 just like a 3D game.

Thanks for the reply and a special thanks for not getting all sanctimonius about the fact that it had been answered already.

Searching is fine, and I use it, but if one doesn't know exactly what they are looking for, it makes it tough to find the answer sometimes. So people who don't know simply ask people who hopefully will.

Is there a better command line interface to use on the phone? I cannot connect my phone to my work computer or install WOSQI on it.

[pastorrich1]

Originally Posted by circuitjc

Although it is nice to make this into an IPK I feel compelled to say that having to do some command line work at installing this raises the bar a little and keeps the people who are too lazy or uninformed from doing this. I bet that more than half of this thread are people who can't spell the filename, want the newest kernal asap, or just can't wrap their head around a command line.

Developers generally aren't intersted in keeping their work isolated to a few "worthy" individuals. My guess is, they want everyone that can to benefit from their hard work as that means greater exposure for them and potentially greater opportunity and potential reward or recognition for that work.

The unwashed masses really appreciate them putting the cookies on the lowest possible shelf. We also get a good laugh when our dogs whiz on your lawn!

[reese917]

Originally Posted by circuitjc

Although it is nice to make this into an IPK I feel compelled to say that having to do some command line work at installing this raises the bar a little and keeps the people who are too lazy or uninformed from doing this. I bet that more than half of this thread are people who can't spell the filename, want the newest kernal asap, or just can't wrap their head around a command line.

I agree, I think there should be at least a little challenge involved to show you know what you're getting yourself into.

[rksand]

Originally Posted by pastorrich1

...

Is there a better command line interface to use on the phone? I cannot connect my phone to my work computer or install WOSQI on it.

The Terminal app is again working.

Ron

[eastwildcat89]

i installed the 800 mhz patch after update and it is runin smothly

[bradcrandall1]

Will this work with 1.4.1.1?

[Phenoum]

Are you asking if the eventual patch WILL work with 1.4.1.1? as opposed to 1.4.1?

Please clarify?

[F3ZIE]

Originally Posted by k-wow

i have 1.4.1.1 and installed the 800mhz patch and now my calendar does not launch. i ran the WebOS Repair Utility and it did not fix it. The calendar icon is blank; in other words, it does not show today's date. I tap on it and it glows for like 6 seconds, then the tap glow goes away and nothing happens. Anyone else having this issue?

I have had this problem aswell. Try uninstalling all of your patches. Its a Heart Break yes but that should fix it. Then load them back one at a time untill it happens again.

Also try Uninstalling 800MHZ.....then try again with no patches installed. Troubleshooting is not as hard as it sounds bud.

[circuitjc]

Originally Posted by pastorrich1

Developers generally aren't intersted in keeping their work isolated to a few "worthy" individuals. My guess is, they want everyone that can to benefit from their hard work as that means greater exposure for them and potentially greater opportunity and potential reward or recognition for that work.

I agree and didn't mean to make it out that some are more "worthy" than others. I just would like it better if people would do some research before they come running to get someone else to do their work for them.

This world is what it is though so I don't expect it to conform to my wishes.

Oh and where I live your dog on my lawn equals shotgun.

[F3ZIE]

So Caj whats the verdict. Should we proceed with the installation. (FYI I am going to install the new one (if) when it comes out through Linux Command Line). I know you have been asked this atleast a 100 times but I am getting some wierd answers. I saw on one page you said "Do what you like" and on another "You can" and so on. So I would like an answer for those of us who are going to be using the Linux Command Line installation method.

Are you going to be making a 1.4.1 version for Linux Command Line method? Is what I am asking or can we proceed with the old 1.4 version.

Sorry for the repeated question but I hope my explanation will suffice.

[nameeri]

I've installed the 720MHz patch with 1.4.1.1 on a Sprint Pre. Seems to be working fine. I will monitor the battery usage and report back what I find. So far though, its like a brand new super fast phone.

[blasted]

can´t wait anymore....i´ll do it.

[Demlor]

Originally Posted by F3ZIE

So Caj whats the verdict. Should we proceed with the installation. (FYI I am going to install the new one (if) when it comes out through Linux Command Line). I know you have been asked this atleast a 100 times but I am getting some wierd answers. I saw on one page you said "Do what you like" and on another "You can" and so on. So I would like an answer for those of us who are going to be using the Linux Command Line installation method.

Are you going to be making a 1.4.1 version for Linux Command Line method? Is what I am asking or can we proceed with the old 1.4 version.

Sorry for the repeated question but I hope my explanation will suffice.

There is currently an IPK in another thread, it's only for 550MHz and 600MHz so far I believe.
The 720 and 800MHz patches that you install over linux command line are up and running again, they can run on 1.4.1.x since the kernel wasn't effected where these patches go into place.
So to answer your question, yes you can install the 720MHz and 800MHz.
Same circumstances apply, take this at your own risk, by that I mean your warranty can become void.

I know you wanted to hear this from Jeff(Caj2008)
But he's going to say the same thing just more verbally fancy.

[ericizzy1]

you guys are soooo funny. so many people did it, and you are all still debating , funny and weird at the same time

[Demlor]

Originally Posted by ericizzy1

you guys are soooo funny. so many people did it, and you are all still debating , funny and weird at the same time

Well some people don't read the whole thread, I know I wouldn't with over 100+ pages.
So things have to be repeated.
Which is okay, I like to help people with what I know.

[ericizzy1]

Originally Posted by Demlor

Well some people don't read the whole thread, I know I wouldn't with over 100+ pages.
So things have to be repeated.
Which is okay, I like to help people with what I know.

its people like u that make this world a better place to be in.

[rancid13iv]

Well, it has been a day with the 800Mhz Patch with 1.4.1.1.

There has been only one issue, which had happend before this patch.
My phone restarted when I was flipping through my launcher pages.

Other than that, I am stoked about this forum. I have never cared enough to post, but this kind of selfless work has made me want to "do my part".

[ruddogg]

Originally Posted by UncleKeg

Yes Ruddogg, I got the same thing trying to run from Quick Install. I eventually downloaded terminus and ran on the pre itself .....

-Keg

@ UncleKeg, thanks to sq5, just hit enter twice on each line & it works on Quick Install

Originally Posted by sq5

If you're doing the commands through webosqi instead of a full linux shell, you might want enter them like this instead...

To disable updates:

mount -o remount,rw / (press enter twice)

chmod -x /usr/bin/UpdateDaemon (press enter twice)

mount -o remount,ro / (press enter twice)

Then reset your phone


To re-enable updates:

mount -o remount,rw / (press enter twice)

chmod +x /usr/bin/UpdateDaemon (press enter twice)

mount -o remount,ro / (press enter twice)

and then reset your phone.

[milliman]

caj2008, thanks for the update. I suspected that there was a couple of changes in the kernel. I really miss your kernel patch, but I can wait until you do it right. In the mean time it is back to the LunaSysMgr 600 MHz patch.