|
|
webOS Nation Forums > webOS smartphones (Pre, Pixi, Veer) > webOS tips, information, and resources > [B]Optimized WebOS 1.4 Kernel Video/WOSQI 720Mhz/800 MHz Easy Install. [/B]
1 2 3 4 5 6 7 8 13 53 103 ... Last
I need help I had ran the following script on my pre to run it at 600mhz:
mount -o remount,rw /
cd /usr/bin
sed "s/500000/600000/g" LunaSysMgr > newlunasysmgr
mv LunaSysMgr LunaSysMgr.orig
mv newlunasysmgr LunaSysMgr
chmod +x LunaSysMgr
How do I remove it now!???
mount -o remount,rw /
cd /usr/bin
sed "s/500000/600000/g" LunaSysMgr > newlunasysmgr
mv LunaSysMgr LunaSysMgr.orig
mv newlunasysmgr LunaSysMgr
chmod +x LunaSysMgr
How do I remove it now!???
Unix is the man thanks a lot for all your work.
it's restarting.. I can't wait!!!
wow it's fast, but one slight problem.. My phone went through 8 percent of battery life while playing need for speed in like less than a min.. and it was plugged in...
edit: nvm, it's booting up..
wow it's fast, but one slight problem.. My phone went through 8 percent of battery life while playing need for speed in like less than a min.. and it was plugged in...
edit: nvm, it's booting up..
I don't get USB options anymore. I plug in my USB and nothing happens. Do I need to re-enable something?
I hate my life - well not really - but my quick install is on my work computer I might actually go in early tomorrow thanks guys!!!
Asking me to install GNU patch when I click on "tweaks".....I keep hitting Okay but when I reopen, it still shows up! how do i fix this
Originally Posted by lizardking1:
I don't get USB options anymore. I plug in my USB and nothing happens. Do I need to re-enable something?
Try 1 of 3 thingsI don't get USB options anymore. I plug in my USB and nothing happens. Do I need to re-enable something?
1) Change USB ports forces the driver to reinstall to it. (worked for me)
2) Reinstall drivers
3) Either reboot your computer or go StartMenu->Run...->"services.msc"
Then look for "Palm Novacom", right click, and select "restart" (jason suggestion
Thanks so much, I really appreciate the hard work everyone put forth for this patch to happen. I just wanted to know is it still safe to leave my phone on the touchstone charger the whole night? I'm assuming it is but I just want to be sure about it. Thanks again.
Okay I think I'm cool. Very nice!
Couple questions:
1. So why is it always faster to load apps the second time and will it be like this after any reboot including Luna?
2. As a precaution, should I be aware if the device gets hot and allow it to cool down for safety? Will streaming music and web browsing at the same time for too long potentially be an issue?
Couple questions:
1. So why is it always faster to load apps the second time and will it be like this after any reboot including Luna?
2. As a precaution, should I be aware if the device gets hot and allow it to cool down for safety? Will streaming music and web browsing at the same time for too long potentially be an issue?
Originally Posted by Major Payne:
Try 1 of 3 things
1) Change USB ports forces the driver to reinstall to it. (worked for me)
2) Reinstall drivers
3) Either reboot your computer or go StartMenu->Run...->"services.msc"
Then look for "Palm Novacom", right click, and select "restart" (jason suggestion
Try 1 of 3 things
1) Change USB ports forces the driver to reinstall to it. (worked for me)
2) Reinstall drivers
3) Either reboot your computer or go StartMenu->Run...->"services.msc"
Then look for "Palm Novacom", right click, and select "restart" (jason suggestion
I mean my phone. I plug in the cable I get no options for USB, MEDIA SYNC or Just charging.
Originally Posted by Dabigappledadon:
I need help...my 600MHz patch is not uninstalling!!!....when i type: sh /var/home/root/600MHz_OSIndependentpatch.sh uninstall, it just says: can't open var/home/root/600MHz_OSIndependentpatch
Please help!
type: ls /var/home/root and see if the file is all lowercase or not.I need help...my 600MHz patch is not uninstalling!!!....when i type: sh /var/home/root/600MHz_OSIndependentpatch.sh uninstall, it just says: can't open var/home/root/600MHz_OSIndependentpatch
Please help!
Originally Posted by lizardking1:
I mean my phone. I plug in the cable I get no options for USB, MEDIA SYNC or Just charging.
Did you install the just charge patch?I mean my phone. I plug in the cable I get no options for USB, MEDIA SYNC or Just charging.
Originally Posted by Freshyz:
Okay I think I'm cool. Very nice!
Couple questions:
1. So why is it always faster to load apps the second time and will it be like this after any reboot including Luna?
Data stays in memory after closing. It's the same phenomenon that contributes to the "Too Many Cards" error when no cards are open.Okay I think I'm cool. Very nice!
Couple questions:
1. So why is it always faster to load apps the second time and will it be like this after any reboot including Luna?
Tweaks under QI is being lame...
Originally Posted by mdmogren:
Did you install the just charge patch?
NODid you install the just charge patch?
Biggest difference I noticed in my very short few minutes of testing so far: Power on time drops from 5 minutes 30 seconds or so when stock, to 3 minutes 15 seconds on 800mHz.
That two minutes is honestly a huge difference. It's the difference between being really annoyed that my Pre is taking so long to boot and being okay with the time it takes to boot.
That two minutes is honestly a huge difference. It's the difference between being really annoyed that my Pre is taking so long to boot and being okay with the time it takes to boot.
Originally Posted by as4life:
type: ls /var/home/root and see if the file is all lowercase or not.
when i type it and hit enter, nothing happens....i'm using command line in WebOS Quick Installtype: ls /var/home/root and see if the file is all lowercase or not.
nvm, it's booting up..
Originally Posted by jhoff80:
Biggest difference I noticed in my very short few minutes of testing so far: Power on time drops from 5 minutes 30 seconds or so when stock, to 3 minutes 15 seconds on 800mHz.
That two minutes is honestly a huge difference. It's the difference between being really annoyed that my Pre is taking so long to boot and being okay with the time it takes to boot.
Google Maps is the most impressive to me so far. In satellite view on WiFi, you can pan around the map and it redraws almost instantly instead of the few second redraw @ 500 MHz.Biggest difference I noticed in my very short few minutes of testing so far: Power on time drops from 5 minutes 30 seconds or so when stock, to 3 minutes 15 seconds on 800mHz.
That two minutes is honestly a huge difference. It's the difference between being really annoyed that my Pre is taking so long to boot and being okay with the time it takes to boot.
thx i just put it on awsome
1 2 3
4 5 6 7 8 13 53 103
...
Last
webOS Nation Forums > webOS smartphones (Pre, Pixi, Veer) > webOS tips, information, and resources > [B]Optimized WebOS 1.4 Kernel Video/WOSQI 720Mhz/800 MHz Easy Install. [/B]
