[B]Optimized WebOS 1.4 Kernel Video/WOSQI 720Mhz/800 MHz Easy Install. [/B] - Page 101

webOS Nation Forums > webOS smartphones (Pre, Pixi, Veer) > webOS tips, information, and resources > [B]Optimized WebOS 1.4 Kernel Video/WOSQI 720Mhz/800 MHz Easy Install. [/B]
First ... 51 91 96 97 98 99 100 101 102 103 104 105 106 111 ... Last

Member: titanyium
at: 04:50 PM 04/02/2010

From the sounds of it everyone can run the patch on WebOS 1.4.1 i'm gonna try it out and report any problems. i'll be constantly monitoring the temp and maybe install the temp alarm app, hehe

Member: Keegsta
at: 05:03 PM 04/02/2010

Did anyone else get this same error when installing on 1.4.1?

root@palm-webos-device: sh /var/home/root/800MHzOS14.sh install
tar: Removing leading `/' from member names
crypto/ecb.ko
crypto/pcbc.ko
drivers/block/nbd.ko
drivers/net/ifb.ko
drivers/scsi/scsi_wait_scan.ko
arch/arm/oprofile/oprofile.ko
tar: arch/arm/oprofile/oprofile.ko: Wrote only 3584 of 10240 bytes
arch/arm/boot/uImage
tar: Error exit delayed from previous errors
sed: write error
Rebooting...

Member: PreGk
at: 05:09 PM 04/02/2010

Originally Posted by crxssi:
I doubt the phone "rebooted", it probably restarted Luna (a phone reboot will take several minutes, a Luna restart will take around 1 min or less). I have been having problems with occasional Luna restarts ever since 1.4.0, and it (unfortunately) continues with 1.4.1.1. It doesn't seem to matter if the 800 Mhz kernel is installed or not. Prior to 1.4.0, I had been using the phone almost 9 months and never had a spontaneous Luna restart (or reboot for that matter).

No it definitely rebooted (full restart). I know the difference. It took a few minutes to boot up, I was actually staring at the "non-glowing" Palm logo considering pulling the battery, but I let it run its course and it eventually booted.

Member: PreGk
at: 05:14 PM 04/02/2010

Originally Posted by caj2008:
600 ipk is different and is fine. Your problems are not related to this ipk. A lunasysmgr patch is totally different than a kernel. This thread is referring only to use of 720 and 800 MHz kernel.

Ok Caj, I think I may have missed my point. I wanted to know the user reported issues with the 720/800 kernel on 1.4.1, so I can lookout for them and determine if I have experienced them already (without the 720/800 kernel installed) to see if they may be unrelated to the kernel and maybe related to 1.4.1.

Member: crxssi
at: 05:15 PM 04/02/2010

Originally Posted by Keegsta:
Did anyone else get this same error when installing on 1.4.1?

root@palm-webos-device: sh /var/home/root/800MHzOS14.sh install
tar: arch/arm/oprofile/oprofile.ko: Wrote only 3584 of 10240 bytes
arch/arm/boot/uImage
tar: Error exit delayed from previous errors
sed: write error
Rebooting...

Yikes! It would appear that you either ran out of disk space (Flash space) or your .sh file was corrupt or truncated. I hope it didn't frakk your phone, since you might end up with some files from the old kernel and some from the new!

Really, for something this important, md5sums should be posted for the files to verify the are correct first (or do these shar files have some self-validation first, before untarring?)

Member: trinidon2k
at: 05:29 PM 04/02/2010

hey caj, can you describe some of the issues others have come across on 1.4.1?

Member: PreGk
at: 05:34 PM 04/02/2010

Originally Posted by caj2008:
If you had an issue and it cleared up after unistall, could you reinstall to verify if the problem resurfaces.

If that's directed at me, I'm installing the 720Mhz Kernel as we speak. As far as crashing with the 600 .ipk, I don't blame the patch at all. I think it was more related to the heavy load I was putting on my Pre (BT streaming seems to really bog down the Pre). Sorry if I made it sound like the patch caused it.

Member: biggamer3
at: 05:37 PM 04/02/2010

whats the best way to check if the 800 is working on the phone?

Member: trinidon2k
at: 05:44 PM 04/02/2010

Originally Posted by biggamer3:
whats the best way to check if the 800 is working on the phone?

lol... see step 11 in the OP

caj, I couldn't take 500Mhz anymore... you spoiled me rotten. Just re-installed the 800Mhz kernel, i'll report back if i have any issues on 1.4.1.1

Member: PreGk
at: 05:48 PM 04/02/2010

Originally Posted by biggamer3:
whats the best way to check if the 800 is working on the phone?

Read the first post. You have to type in a command in WOSQI

Member: Keegsta
at: 06:00 PM 04/02/2010

Originally Posted by crxssi:
Yikes! It would appear that you either ran out of disk space (Flash space) or your .sh file was corrupt or truncated. I hope it didn't frakk your phone, since you might end up with some files from the old kernel and some from the new!

Really, for something this important, md5sums should be posted for the files to verify the are correct first (or do these shar files have some self-validation first, before untarring?)

Any suggestions on how to fix it?

Member: Menace187
at: 06:06 PM 04/02/2010

still waiting to update so i can keep my 800 patch

Member: tserna
at: 06:16 PM 04/02/2010

Member: Keegsta
at: 06:18 PM 04/02/2010

Wow, so after this error when trying to uninstall the patch:

root@palm-webos-device: sh /var/home/root/800MHzOS14.sh uninstall
boot/uImage-2.6.24-palm-joplin-3430
lib/modules/2.6.24-palm-joplin-3430/
lib/modules/2.6.24-palm-joplin-3430/tisgxgfx/
lib/modules/2.6.24-palm-joplin-3430/tisgxgfx/bc_example.ko
tar: lib/modules/2.6.24-palm-joplin-3430/tisgxgfx/bc_example.ko: Wrote only 4096 of 6656 bytes
lib/modules/2.6.24-palm-joplin-3430/tisgxgfx/pvrsrvkm.ko
lib/modules/2.6.24-palm-joplin-3430/tisgxgfx/omaplfb.ko
tar: lib/modules/2.6.24-palm-joplin-3430/modules.ofmap
lib/modules/2.6.24-palm-joplin-3430/tisgxgfx/omaplfb.ko: Wrote only 5632 of 9416 bytes
lib/modules/2.6.24-palm-joplin-3430/drivers/
lib/modules/2.6.24-palm-joplin-3430/drivers/misc/
lib/modules/2.6.24-palm-joplin-3430/drivers/misc/exmap.ko
lib/modules/2.6.24-palm-joplin-3430/modules.symbols
lib/modules/2.6.24-palm-joplin-3430/modules.seriomap
lib/modules/2.6.24-palm-joplin-3430/modules.dep
lib/modules/2.6.24-palm-joplin-3430/kernel/
lib/modules/2.6.24-palm-joplin-3430/kernel/crypto/
lib/modules/2.6.24-palm-joplin-3430/kernel/crypto/pcbc.ko
lib/modules/2.6.24-palm-joplin-3430/kernel/crypto/ecb.ko
lib/modules/2.6.24-palm-joplin-3430/kernel/drivers/
lib/modules/2.6.24-palm-joplin-3430/kernel/drivers/net/
lib/modules/2.6.24-palm-joplin-3430/kernel/drivers/net/ifb.ko
lib/modules/2.6.24-palm-joplin-3430/kernel/drivers/scsi/
lib/modules/2.6.24-palm-joplin-3430/kernel/drivers/scsi/scsi_wait_scan.ko
lib/modules/2.6.24-palm-joplin-3430/kernel/drivers/block/
lib/modules/2.6.24-palm-joplin-3430/kernel/drivers/block/nbd.ko
lib/modules/2.6.24-palm-joplin-3430/kernel/net/
lib/modules/2.6.24-palm-joplin-3430/kernel/net/wifi/
lib/modules/2.6.24-palm-joplin-3430/kernel/net/wifi/sd8xxx.ko
lib/modules/2.6.24-palm-joplin-3430/kernel/net/wifi/uap8xxx.ko
lib/modules/2.6.24-palm-joplin-3430/kernel/arch/
lib/modules/2.6.24-palm-joplin-3430/kernel/arch/arm/
lib/modules/2.6.24-palm-joplin-3430/kernel/arch/arm/boot/
lib/modules/2.6.24-palm-joplin-3430/kernel/arch/arm/boot/uImage
lib/modules/2.6.24-palm-joplin-3430/kernel/arch/arm/oprofile/
lib/modules/2.6.24-palm-joplin-3430/kernel/arch/arm/oprofile/oprofile.ko
lib/modules/2.6.24-palm-joplin-3430/modules.ieee1394map
lib/modules/2.6.24-palm-joplin-3430/modules.usbmap
lib/modules/2.6.24-palm-joplin-3430/modules.alias
lib/modules/2.6.24-palm-joplin-3430/dspbridge/
lib/modules/2.6.24-palm-joplin-3430/dspbridge/bridgedriver.ko
lib/modules/2.6.24-palm-joplin-3430/modules.isapnpmap
lib/modules/2.6.24-palm-joplin-3430/modules.inputmap
lib/modules/2.6.24-palm-joplin-3430/modules.pcimap
lib/modules/2.6.24-palm-joplin-3430/modules.ccwmap
usr/bin/LunaSysMgr
tar: usr/bin/LunaSysMgr: Wrote only 3072 of 10240 bytes
etc/event.d/PmNetConfigManager
tar: Error exit delayed from previous errors
Rebooting...

My phone will no longer boot up.

Member: ruddogg
at: 06:20 PM 04/02/2010

Originally Posted by Menace187:
still waiting to update so i can keep my 800 patch

+1

I'm on Verizon, so it looks like it's going to be another couple weeks before I get it. I've reinstalled the 800MHz patch & disabled the auto update... I'll enable it & take the 800MHz off when it's annouced that Verizon is getting the update!

Member: PreGk
at: 06:20 PM 04/02/2010

Ok, I'm back in action as well. I thought the 600 patch could hold me off for a couple days, but I was wrong. I'm at 720 again, and I hate using my Pre without it. Everything looks good so far, no more stutter on scrolling through the music collection. I'll report back if any issues.

Member: orizzle
at: 06:24 PM 04/02/2010

Originally Posted by Keegsta:
My phone will no longer boot up.

you have to doctor now

Member: Keegsta
at: 06:24 PM 04/02/2010

Originally Posted by orizzle:
you have to doctor now

Is there any way I can get my pictures off of the USB drive?

Member: wellwellwell11
at: 06:28 PM 04/02/2010

tried the 800 patch again with 1.4.1 and it seems fine no heat indication yet, I also am alpha testing the cpu scaler ultimate with the kernal and its very very nice, once its public it will be very helpful with every overclocking kernal.

Member: crxssi
at: 06:39 PM 04/02/2010

Originally Posted by Keegsta:
Wow, so after this error when trying to uninstall the patch:
tar: Error exit delayed from previous errors
Rebooting...

My phone will no longer boot up.

(It is not a patch, it is a replacement kernel)

I was afraid of that. It looks like you will have to use the Dr. thing to restore your phone to factory defaults

At least- look at the bright side- it should be nice a clean and ready to install the kernel again.

Check the size and md5sum's of the downloaded files this time, firs. I have verified that both of these are working files:

$ ls -l *sh
-rw-rw-r-- 1 crxssi crxssi 3267933 2010-04-02 16:30 720MHzOS14.sh
-rw-rw-r-- 1 crxssi crxssi 3267933 2010-03-28 21:11 800MHzOS14.sh

$md5sum *sh
a3e92a20566462618a9d6c63a36e670d 720MHzOS14.sh
c0e33148b1b126666b97f88c5a3e4f39 800MHzOS14.sh

Tags: 720mhz, 800mhz, os1.4, speed

First ... 51 91 96 97 98 99 100 101 102 103 104 105 106 111 ... Last
Closed Thread

webOS Nation Forums > webOS smartphones (Pre, Pixi, Veer) > webOS tips, information, and resources > [B]Optimized WebOS 1.4 Kernel Video/WOSQI 720Mhz/800 MHz Easy Install. [/B]