Call for Alpha Testers: 720 MHz - Page 6

Shadavis08 · 02/23/2010, 08:41 PM

well i guess im out if im not able to even install them ha ha

063_xobx · 02/23/2010, 08:42 PM

Quote:

Originally Posted by Shadavis08

well i guess im out if im not able to even install them ha ha

try starting fresh it worked for me first time but even one small error could be sitting there glaring you in the face without you realizing it

Shadavis08 · 08:53 PM

ok i will resend the file and try again thanks! sorry to bother everone i was getting frustrated with this a little bit . but i finally got it to work yay . lol i must need glasses bad because i was inputting the wrong info like someone mentioned earlier , cant remeber who that might have been lol thanks guys.!!!

FuManChuu · 02/23/2010, 08:59 PM

I e-mailed in my results... All gravy so far

Tcub · 02/23/2010, 09:07 PM

xanthinealkaloid is a genius! He solved my issue!! Thanks so much! I'll begin the tests now.

Tcub · 02/23/2010, 09:18 PM

Okay, so instead of...

Code:

mv LunaSysMgr.orig LunaSysMgr

I used this..

Code:

mv /usr/bin/LunaSysMgr.orig /usr/bin/LunaSysMgr

NOTE This should only pertain to those who may have used the command line hack to clock their CPU to 600MHz! This is an older trick ergo I sorta doubt others still have this method enabled. Just in case you do and you're having this issue.. there's the fix!

trim81 · 02/23/2010, 09:24 PM

Quote:

Originally Posted by Tcub

Okay, so instead of...

Code:

mv LunaSysMgr.orig LunaSysMgr

I used this..

Code:

mv /usr/bin/LunaSysMgr.orig /usr/bin/LunaSysMgr

NOTE This should only pertain to those who may have used the command line hack to clock their CPU to 600MHz! This is an older trick ergo I sorta doubt others still have this method enabled. Just in case you do and you're having this issue.. there's the fix!

fark spent all night doctoring my PRE because I couldnt remove the 600mhz..

this would have done the trick for me

too bad I dont know much linux commands.

Anyhow, 800mhz is working BEAUFTIFULLY and just emailed you my results.

Those whom are waitng.... you guys WILL be very happy with this work

Tcub · 02/23/2010, 09:30 PM

Quote:

Originally Posted by trim81

fark spent all night doctoring my PRE because I couldnt remove the 600mhz..

this would have done the trick for me

too bad I dont know much linux commands.

Anyhow, 800mhz is working BEAUFTIFULLY and just emailed you my results.

Those whom are waitng.... you guys WILL be very happy with this work

Sorry to hear that! xanthinealkaloid is the mastermind behind that solution! Be sure to hit the Thanks button on his posts in this thread!

Currently running 720MHz.. It's too late to actually run some tests, but that's not a bad thing.. Tomorrow I'll give a real world run complete with battery monitoring and then I'll also run some speed tests to compare the results!

After that I'll run 800MHz, so expect my results some time tomorrow! I also have a Final project due for one of my courses so I'll be kinda busy with that.. and Heavy Rain came out today..

Sheesh! I'm busy!

xanthinealkaloid · 02/23/2010, 09:42 PM

Jason Robitaille/WebOS Internals group/Marco = geniuses/masterminds

me = just another moron who gets lucky sometimes

Quote:

Originally Posted by caj2008

...
I already have 30+ correct installs following protocol exactly.
...

@caj2008 I can't remember if I PM'd you or not, but you can add me to the list correct installs. I'm compiling data now. Thanks for getting this thing put together!

.

2sslow · 02/23/2010, 09:45 PM

Quote:

Originally Posted by Shadavis08

ok i will resend the file and try again thanks! sorry to bother everone i was getting frustrated with this a little bit . but i finally got it to work yay . lol i must need glasses bad because i was inputting the wrong info like someone mentioned earlier , cant remeber who that might have been lol thanks guys.!!!

Did you get it?

Why dont you copy and paste? No chance of misspelling anything!

Tcub · 02/23/2010, 09:45 PM

Quote:

Originally Posted by xanthinealkaloid

Jason Robitaille/WebOS Internals group/Marco = geniuses/masterminds

me = just another moron who gets lucky sometimes

@caj2008 I can't remember if I PM'd you or not, but you can add me to the list correct installs. I'm compiling data now. Thanks for getting this thing put together!

.

You did really good for me!

Add me to the list of successful install as well.. We're golden.

sracercelica · 02/23/2010, 10:05 PM

Quote:

Originally Posted by Shadavis08

ive spelled everything correctly a dozen times now lol it still wont install . he said he sent zipped files and these files were not zipped files when i got them so maybe they are corrupt??

Mine werent zipped either, they installed fine, make sure the extension is changed to .sh

Demlor · 02/23/2010, 10:31 PM

Just a tip, if you guys use the Battery Monitor for testing, it would be easier to take screen shots every time 5 minutes goes by.
So you don't have to copy all the results for a faster report to Marco/Jeff.

Hope that helps!

2sslow · 02/23/2010, 11:05 PM

could somebody please post an excell spreadsheet in the correct format so we can all be on the same page so to speak!

I am in the process of reinstalling win7 and will be down for a day or so. so if someone could post a spreadsheet (w/o the info of course) that would make my life a little easier!

Thanks in advance

2sslow

odontastic · 01:37 PM

I was getting this when installing either patch:

Code:

tar: Removing leading `/' from member names
crypto/ecb.ko
crypto/pcbc.ko
drivers/block/nbd.ko
tar: Skipping to next header
tar: A lone zero block at 952
tar: Error exit delayed from previous errors
cp: cannot stat 'arch/arm/boot/uImage': No such file or directory
Please reboot.

I started from scratch and now I'm finally running at 800 MHz

Demlor · 02/23/2010, 11:11 PM

pretty much this is the one I used.
A bit different, but same concept
I just found this on google images.

jason2851 · 02/23/2010, 11:26 PM

Does he want us to format it that way within the email? Or attach a table of spreadsheet to the email...? Best get started writing up the report...

sracercelica · 02/23/2010, 11:46 PM

also, does he want to wait until we complete test for both patches or send seperately for each frequency so he can start looking through it before the update gets here.

2sslow · 02/24/2010, 12:00 AM

im not real good w/ excell, i was kind of looking for an .xls properly labled

Blaize · 02/24/2010, 12:16 AM

Sent first email with baseline (500) tests and have installed 720. Phone seems snappier already. I'll be testing and sending the email on it tomorrow night, after my phone has had time to adjust (and I've had time to sleep, and go to work, and come home...).

2sslow, pm me your email address and I'll send you a blank copy of what I came up with...can you use open office? I can save the template as .xls if not.

02/23/2010, 08:41 PM	#101 (permalink)
Shadavis08 Member Join Date: Aug 2009 Location: Ї Ƈøṁε ℉яøṁ ṫɦε ℓαη∂ øḟ ṫɦε øḟḟ ṫø℘ḯ¢ !! NOW BACK OFF !! ltm ltm ltm Posts: 9,127 Likes Received: 70 Thanks: 2,261 Thanked 2,792 Times in 2,201 Posts	well i guess im out if im not able to even install them ha ha __________________ ĦṔ-ḶøØṫ-ŦḯØη Here is a direct link to webOS Doc for all carriers http://www.webos-internals.org/wiki/...octor_Versions P.S. if i have helped you and you are thankful please hit the thanks button to the right---->
	Liked by

02/23/2010, 08:46 PM	#103 (permalink)
Shadavis08 Member Join Date: Aug 2009 Location: Ї Ƈøṁε ℉яøṁ ṫɦε ℓαη∂ øḟ ṫɦε øḟḟ ṫø℘ḯ¢ !! NOW BACK OFF !! ltm ltm ltm Posts: 9,127 Likes Received: 70 Thanks: 2,261 Thanked 2,792 Times in 2,201 Posts	ok i will resend the file and try again thanks! sorry to bother everone i was getting frustrated with this a little bit . but i finally got it to work yay . lol i must need glasses bad because i was inputting the wrong info like someone mentioned earlier , cant remeber who that might have been lol thanks guys.!!! __________________ ĦṔ-ḶøØṫ-ŦḯØη Here is a direct link to webOS Doc for all carriers http://www.webos-internals.org/wiki/...octor_Versions P.S. if i have helped you and you are thankful please hit the thanks button to the right----> Last edited by Shadavis08; 02/23/2010 at 08:53 PM.
	Liked by

02/23/2010, 08:59 PM	#104 (permalink)
FuManChuu Member Join Date: Mar 2006 Posts: 479 Likes Received: 0 Thanks: 10 Thanked 14 Times in 12 Posts	I e-mailed in my results... All gravy so far __________________ Just waiting for the day my Pre has contacts grouping, and a "speed dial" for text messaging
	Liked by

02/23/2010, 09:07 PM	#105 (permalink)
Tcub Member Join Date: Aug 2009 Location: Olmsted Falls OH Posts: 419 Likes Received: 0 Thanks: 136 Thanked 52 Times in 42 Posts	xanthinealkaloid is a genius! He solved my issue!! Thanks so much! I'll begin the tests now. __________________ Need help with your webOS device? PM me for help!
	Liked by

02/23/2010, 09:18 PM	#106 (permalink)
Tcub Member Join Date: Aug 2009 Location: Olmsted Falls OH Posts: 419 Likes Received: 0 Thanks: 136 Thanked 52 Times in 42 Posts	Okay, so instead of... Code: mv LunaSysMgr.orig LunaSysMgr I used this.. Code: mv /usr/bin/LunaSysMgr.orig /usr/bin/LunaSysMgr NOTE This should only pertain to those who may have used the command line hack to clock their CPU to 600MHz! This is an older trick ergo I sorta doubt others still have this method enabled. Just in case you do and you're having this issue.. there's the fix! __________________ Need help with your webOS device? PM me for help!
	Liked by Thanked By: trim81

02/23/2010, 10:31 PM	#113 (permalink)
Demlor Member Join Date: Jan 2010 Location: Concord, CA Posts: 544 Likes Received: 0 Thanks: 88 Thanked 59 Times in 49 Posts	Just a tip, if you guys use the Battery Monitor for testing, it would be easier to take screen shots every time 5 minutes goes by. So you don't have to copy all the results for a faster report to Marco/Jeff. Hope that helps!
	Liked by Thanked By: 2sslow

02/23/2010, 11:05 PM	#114 (permalink)
2sslow Member Join Date: Jun 2009 Location: Somewhere n da 404 Posts: 2,237 Likes Received: 0 Thanks: 247 Thanked 1,039 Times in 551 Posts	could somebody please post an excell spreadsheet in the correct format so we can all be on the same page so to speak! I am in the process of reinstalling win7 and will be down for a day or so. so if someone could post a spreadsheet (w/o the info of course) that would make my life a little easier! Thanks in advance 2sslow __________________ Please hit the thanks button if I helped you If you've enjoyed my patches please feel free to donate towards further development. Follow the link below.
	Liked by Thanked By: Shadavis08

02/23/2010, 11:11 PM	#115 (permalink)
odontastic Member Join Date: Jul 2009 Posts: 133 Likes Received: 0 Thanks: 98 Thanked 15 Times in 13 Posts	I was getting this when installing either patch: Code: tar: Removing leading `/' from member names crypto/ecb.ko crypto/pcbc.ko drivers/block/nbd.ko tar: Skipping to next header tar: A lone zero block at 952 tar: Error exit delayed from previous errors cp: cannot stat 'arch/arm/boot/uImage': No such file or directory Please reboot. I started from scratch and now I'm finally running at 800 MHz Last edited by odontastic; 02/24/2010 at 01:37 PM.
	Liked by

02/23/2010, 11:26 PM	#117 (permalink)
jason2851 Member Join Date: Oct 2009 Posts: 87 Likes Received: 0 Thanks: 62 Thanked 17 Times in 8 Posts	Does he want us to format it that way within the email? Or attach a table of spreadsheet to the email...? Best get started writing up the report...
	Liked by Thanked By: mdvision

02/23/2010, 11:46 PM	#118 (permalink)
sracercelica Member Join Date: Jun 2009 Posts: 343 Likes Received: 7 Thanks: 20 Thanked 39 Times in 26 Posts	also, does he want to wait until we complete test for both patches or send seperately for each frequency so he can start looking through it before the update gets here.
	Liked by

02/24/2010, 12:00 AM	#119 (permalink)
2sslow Member Join Date: Jun 2009 Location: Somewhere n da 404 Posts: 2,237 Likes Received: 0 Thanks: 247 Thanked 1,039 Times in 551 Posts	im not real good w/ excell, i was kind of looking for an .xls properly labled __________________ Please hit the thanks button if I helped you If you've enjoyed my patches please feel free to donate towards further development. Follow the link below.
	Liked by

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode