Page 7 of 16 FirstFirst ... 23456789101112 ... LastLast
Results 121 to 140 of 306
  1. #121  
    Quote Originally Posted by Seven_Speed View Post
    I have one the strangest thing happen and i cant seem to fix it. my system sound is no longer working and my ringer sound is very low,,,,, let me say this to get out of the way. Yes the switch is on, Yes the volume is on high,,,,and Yes i ran an EPR to see if that was the problem, no luck oh and one more thing yes i went into device menu and test the phone sound and nothing ANY OTHER IDEAS GUYS I NEED YOUR HELP

    Did you go to Sounds and Ringtones and set the system sound slider, or did you just use the toggle to increase the volume? At one point after I did something to the phone, the system sound slider reset to a lower point. This is not changed by the external toggle. Check the volume setting on your Sounds and Ringtones. Also, can you play music? If you get a call, is it going to the right speaker? You could have the headphone jack issue.
  2. #122  
    Quote Originally Posted by rush View Post
    How did you update to 1.4.5? If it was OTA, then I would recommend doing a webos doctor update.

    I always do another update through webos doc. Hope that work for you.
    I first did the OTA update and ran EPR prior to updating. Then after not being too pleased with the function of the Pre, I Doctored to 1.4.5 and have had problems since.
    I am equivalent to a man dammit.
  3. #123  
    My battery life seems much worse with this update. I am running uberkernel, but I have been for a while and it always made my battery life better anyway. I wonder if I might have to doctor...
  4. #124  
    I have one the strangest thing happen and i cant seem to fix it. my system sound is no longer working and my ringer sound is very low,,,,, let me say this to get out of the way. Yes the switch is on, Yes the volume is on high,,,,and Yes i ran an EPR to see if that was the problem, no luck oh and one more thing yes i went into device menu and test the phone sound and nothing ANY OTHER IDEAS GUYS I NEED YOUR HELP
  5. #125  
    Quote Originally Posted by Seven_Speed View Post
    I have one the strangest thing happen and i cant seem to fix it. my system sound is no longer working and my ringer sound is very low,,,,, let me say this to get out of the way. Yes the switch is on, Yes the volume is on high,,,,and Yes i ran an EPR to see if that was the problem, no luck oh and one more thing yes i went into device menu and test the phone sound and nothing ANY OTHER IDEAS GUYS I NEED YOUR HELP
    mine did this the first few hours .. I went in and changed my ringtone and then back to what I originally had and that worked for me in getting both sounds back ... however, did you happen to have a headset in? that sometimes can cause that issue too ...

    Good Luck!
    smiles for your day ~ pixielee
    In a love/hate relationship w/my PalmPre(s) 6/6/09 3/22/10 4/12/10 and 5/5/10 (ops yes I lost one!)

    Its Life - Live it, Love it, PLAY in it
  6. #126  
    Quote Originally Posted by sleepybubba View Post
    Device: Pre
    Carrier: Sprint
    WebOS version: 1.4.5
    Prior webOS version: 1.4.1.1
    How did you update: OTA over WiFi
    ----------

    * After upgrade the phone fails to connect to wireless. The signal strength seems fine but connection isn't happening. We have Protected EAP with WPA2-Etnerprise encryption at work. Before the upgrade it was working fine.

    * I tried connecting at the train via non-authenticated wifi and at home where I have a WPA2 authentication (non-Enterprise) and it seemed working. So the only option is broken is WPA2-Enteprirse. This was definitely wokring in 1.4.1 and 1.4.0.
    I'm having the same issue with WIFI at the office. Enterprise WPA2 keeps trying to connect (doesn't even prompt me for my username/password when I manually connect), but never succeds. Meanwhile, my non-Enterprise WPA connection at home works flawlessly. It worked fine on 1.4.1 and below. Anyone know of a fix? As I can't get to connect, I also can't go to the advanced options to "Forget this network"
    Last edited by sumanb; 08/13/2010 at 04:28 PM. Reason: Needed to quote original poster
  7. #127  
    Quote Originally Posted by pixielee View Post
    mine did this the first few hours .. I went in and changed my ringtone and then back to what I originally had and that worked for me in getting both sounds back ... however, did you happen to have a headset in? that sometimes can cause that issue too ...

    Good Luck!

    did i forget to mention i lost my swoosh sound, you know the sound it makes when u flick the card away,,,,,ohhhh my ringer is lound again but no swoosh sound
  8. #128  
    I posted the following last night, but no responses yet:

    *******************************************************
    Just updated Sprint Pre. Then opened PreWare hit "update all." Unfortunately, I got the error messages I've attached.

    So, I updated most of my patches manually, i.e., one-by-one. Then I could not restart. The Luna restart button wouldn't work!

    So I pulled the battery.

    Now, fortunately, most everything seems to be in order except the few patches that wouldn't update.

    Anybody have an idea what to do now?
    *************************************

    TODAY:

    I've reattached the error messages.

    And here are the patches that still WILL NOT UPDATE:

    * "Bookmarks List Button" by Jason Robitaille

    * "System Menu Mods v1" & "System Menu Transparent Full Width App Menu" by sconix. For some reason, his "System Menu Today Menu" updated and works.

    O.K., I just tried to REMOVE those 3 patches (to try and reinstall) and that fails, as well. When trying to REMOVE, the "Bookmarks List Button" says "1 out of 2 hunks FAILED" ("that's what SHE said!") and the other two patches indicate "Unreversed patch detected!"

    As far as I can tell, everything else is back to normal.

    Does anyone know why these patches won't udpate? And idea what I should do now? I suppose it's not that big of a deal about those 3 patches, but I'd like to have them, if possible.

    Thanks!
    *************************************************************
    O.K., I'm editing my post here on 8/15.

    "pip smith" was kind and generous enough to show me how to fix this problem in a private message. I'll post his instructions here in case anyone else has the same issue:

    Yes there is aupt issue with those particular patches in certain OTA situations. There is a thread about the patches in question.
    It is an easy fix though, just do the following.
    1)Open Preware, update the saved package list from the top left corner.
    2)Go to list of everything. Type emergency and select emergency patch recovery. Install the package, it will install and remove itself. You may need to do a restart afterwards.
    Now open preware again, go back to saved package list, check you want all the patches listed, then hit install all.
    My Pre is now running wonderfully! So, pip, I bow in your presence:
    Attached Images Attached Images
    Last edited by Pre in MN; 08/15/2010 at 04:46 PM.
  9. #129  
    I upgraded to 1.4.5 and due to adding ubberkernnel I had to doc my phone . I am good now running 1.4.5 but phone feels slow and I got a few tmc errors what can I do ?
  10. #130  
    Doctor again maybe.
  11. #131  
    Your post is a bit unclear. Are you saying that you had to doctor your phone after updating it with the UberKernel installed? (In which case the UberKernel was not the problem) or are you saying that you added the UberKernel after updating to 1.4.5 and then had to doctor? And what are you trying to accomplish exactly?
    "Patience, use the force, think." Obi-Wan


    Ready to try Preware? Get this first: Preware Homebrew Documentation
  12. #132  
    Quote Originally Posted by TigerNamedfTony07 View Post
    I upgraded to 1.4.5 and due to adding ubberkernnel I had to doc my phone . I am good now running 1.4.5 but phone feels slow and I got a few tmc errors what can I do ?
    How slow are you talking about... turtle slow! Webos doctor fixes sluggishness and freezes.

    Where you running an overclock kernal, before you did a doc? if so, then I know exactly what you're experiencing.

    Run a webos utility repair and see what happen. A doctor isn't necessary at this point. Ps. You might be amazed on how a battery pull can fix most issues.
  13. ame
    ame is offline
    ame's Avatar
    Posts
    499 Posts
    Global Posts
    2,716 Global Posts
    #133  
    So far the only major nagging issue I notice is with texting. I can no longer send multi-recipient texts. I push the send and it sends me back to the main conversation screen. I have tested this with several other people present, both on Sprint and not, none of them receive them, and none of the texts show up in the conversation as before.

    It's laggier than before, I get constant "too many cards errors" and I seem to have to restart Luna or pull the battery every day where I went WEEKS before.
  14. #134  
    Quote Originally Posted by Seven_Speed View Post
    did i forget to mention i lost my swoosh sound, you know the sound it makes when u flick the card away,,,,,ohhhh my ringer is lound again but no swoosh sound
    Go into sounds & ringtones, under system sounds turn the volume slider all the way up. Looks like it defaults halfway. I couldn't hear mine either and I totally forget about it until you posted. I turned up the system sound and I can now hear the swoosh.

    EDIT: Never mind, I just read your previous post where you already tried turning up the system sound.
  15. #135  
    Apparently the version of Uberkernel listed under "kernels" hasn't been updated for 1.4.5 yet. Oops.

    Updated at work.. and it looks like I have a date with the doctor tonight. Lol, lets hope there's no emergencies on the way home.

    My question: Is there a way to recover the phone by only the phone? I'm at work and don't have the USB cable or drivers on work computer.
  16. #136  
    uber was ready for 1.5 the day it came out.
  17. #137  
    Tell that to my Pre that hangs on Palm logo, which fades out red, flickers, and hangs on Palm logo again.
  18. #138  
    It wasn't Uberkernel that caused your problem. My phone updated flawlessly.

    There isn't a way to doctor without using a PC.
  19. #139  
    Really?

    I removed previous uberkernel. Ran EPR. Restarted. Updated to 1.4.5. Restarted. Updated kernel. Wont restart.
  20. #140  
    Does Verizon not having 1.4.5 count as an issue?
Page 7 of 16 FirstFirst ... 23456789101112 ... LastLast

Tags for this Thread

Posting Permissions