Page 5 of 28 FirstFirst 12345678910 15 ... LastLast
Results 81 to 100 of 552
Like Tree50Likes
  1. #81  
    it still doesn't work on veer.. Please help to update. Thanks.
  2. #82  
    Patch is working AWESOME on my AT&T Pre3! Capital letters and everything works great!! Thank you SOOO much for your hard work on this!!!
  3. #83  
    Quote Originally Posted by CvvB View Post
    I have been able to stabilize the webOS Virtual Keyboard on 2.1.0 on both the Palm Pre 2 and Palm Pre Plus.

    I have also made a shell bash file to patch the LunaSysMgr.

    I have tested it and it works well on my pre.

    The Shell Script has the following options:
    Code:
    USAGE: VKB.sh OPTIONAL:[OPTIONS]
    
    Use one of the following [OPTIONS]:
    
      -patch
         To patch LunaSysMgr
    
      -revert
         To remove the patch and revert the LunaSysMgr to the original status
    
      -status
         To show the status of the patch
    
      -help
         To show this help page!
    If no argument was specified, then the shell uses an automatic mode: where the script determines whether the patch is applied or not and does the opposite activity.

    All you have to do to try it out, send the script to your Pre and through webOS Quick Install Linux Commandline execute the script.

    Don't forget to activate the Virtual Keyboard by using the "luna.conf.patch". I got that from Arthur Thornton. I also made a new one for Pre3.

    Initial Discussion


    Attachment 61808

    As requested, screenshot:
    Attachment 61875

    v1.0: Attachment 61807
    v1.1: Attachment 61911 (Adding webOS 2.2.0/2.2.3 for Pre3)

    SO FAR:
    The patch stablizes the VKB; however, when trying to change the screen orientation, Luna seems to crash. I am checking that later on.

    Enjoy
    Thank you very much for the good patch~
    I'm a user of Pre3 AT&T~
    When I test the patch I have found some BUGS~I want to tell you these,and hope you can update the patch to solve the problems listed as follows:
    1/When I use the explorer to view some websites,I use the virtual key at the same time.But when I turn the screen from vertical to horizontal,the virtual key will broke down,and the pre3 will restart soon~
    2/When the screen is horizontal,I can use the same method to call out the virtual key,but I found I can't use it,when I point the virtual key,it is useless,just like only to point the screen.
    Thank you very much,and I hope you can solve these two problems in the nearly future.
  4.    #84  
    Quote Originally Posted by roynote View Post
    Thank you very much for the good patch~
    I'm a user of Pre3 AT&T~
    When I test the patch I have found some BUGS~I want to tell you these,and hope you can update the patch to solve the problems listed as follows:
    1/When I use the explorer to view some websites,I use the virtual key at the same time.But when I turn the screen from vertical to horizontal,the virtual key will broke down,and the pre3 will restart soon~
    2/When the screen is horizontal,I can use the same method to call out the virtual key,but I found I can't use it,when I point the virtual key,it is useless,just like only to point the screen.
    Thank you very much,and I hope you can solve these two problems in the nearly future.
    Thank you for your feedback ...

    Yup, these problems are known eversince I made the patch. I am trying to figure what makes Luna crash, but it is a bit harder without the source-code. I will post my progress in the initial discussion. You can see the link in the first post.
  5. #85  
    Quote Originally Posted by CvvB View Post
    v1.1: (Adding webOS 2.2.0/2.2.3 for Pre3)

    SO FAR:
    The patch stablizes the VKB; however, when trying to change the screen orientation, Luna seems to crash. I am checking that later on.

    Very good work. However the VKB.sh script wonīt work on an European Pre3.
    It says "Unknown version".

    It would be great if you could include the European Pre3.
  6. #86  
    Quote Originally Posted by CvvB View Post
    Thank you for your feedback ...

    Yup, these problems are known eversince I made the patch. I am trying to figure what makes Luna crash, but it is a bit harder without the source-code. I will post my progress in the initial discussion. You can see the link in the first post.
    OK~Thank you very much for your answer~
    I will see the link in the first post and tell more pre3 users to use the good virtual key~
    Thank you again~
  7. #87  
    Quote Originally Posted by cipher View Post
    Very good work. However the VKB.sh script wonīt work on an European Pre3.
    It says "Unknown version".

    It would be great if you could include the European Pre3.
    My Pre3 is European I guess (its a german QWERTZ one) and it works for me...

    -- Sent from my Palm Pre3 using Forums
  8. #88  
    Quote Originally Posted by 2nd_Street View Post
    My Pre3 is European I guess (its a german QWERTZ one) and it works for me...

    -- Sent from my Palm Pre3 using Forums
    What have you done?
    Iīve installed the Pre3.patch. Then I sent the VKB.sh File to the Pre3 and run it, but it says "Version unknown". The keyboard appears, thats right, but after some keystrokes it hangs.
  9.    #89  
    Quote Originally Posted by cipher View Post
    What have you done?
    Iīve installed the Pre3.patch. Then I sent the VKB.sh File to the Pre3 and run it, but it says "Version unknown". The keyboard appears, thats right, but after some keystrokes it hangs.
    Which version of webOS are you using? which device (Unlocked, AT&T, or Verizon) are you using?

    Can you do a simple SHA1 hash on the libWebKitLuna.so found in /usr/lib/libWebKitLuna.so and report that .. Also, it would be helpful if you can upload it and send the link to me so I can look at it
    Last edited by CvvB; 10/29/2011 at 10:41 AM.
  10. #90  
    Device is a "Pre3 DE UMTS unlocked", webOS 2.2.0. SHA1:
    32C0E899670C4A138549C502A277631536D172D1

    I sent you the link via PM.

    Thank you.
    Last edited by cipher; 10/29/2011 at 08:55 AM.
  11.    #91  
    Quote Originally Posted by cipher View Post
    Device is a "Pre3 DE UMTS unlocked", webOS 2.2.0. SHA1:
    32C0E899670C4A138549C502A277631536D172D1

    I sent you the link via PM.

    Thank you.
    You really have a different libWebKitLuna.so ... I don't know why!

    Can you give me your webOS Doctor link? I would like to extract the files and compare.

    Also, do you know if you have installed any patch that would change the binaries of the libWebKitLuna.so?
  12. #92  
    Quote Originally Posted by CvvB View Post
    Can you give me your webOS Doctor link? I would like to extract the files and compare.
    http://palm.cdnetworks.net/rom/manta...20mantawr.jnlp

    Also, do you know if you have installed any patch that would change the binaries of the libWebKitLuna.so?
    Donīt really know, but I donīt think so.
  13. #93  
    I don't think there are any other binary patches available at the moment, definitely none in the standard or beta preware feeds since aupt-4 doesn't support them, so you'd have to have run a script like the one in this thread, which i presume you haven't? :P
    That webOS doctor is the standard Unlocked Euro one, it matches the link on WebOS Internals' doctor versions page. Very curious indeed. Did you get your Pre3 direct from HP?
    webOS Ports' UI Architect & luna-sysmgr guru.
  14. #94  
    Quote Originally Posted by ShiftyAxel View Post
    Did you get your Pre3 direct from HP?
    No, I got it from German MediaMarkt.
  15. giggles's Avatar
    Posts
    677 Posts
    Global Posts
    690 Global Posts
    #95  
    once you can turn this into a patch and fix landscape mode ill gladly try.
  16. #96  
    Please update for the veer.
  17. #97  
    Quote Originally Posted by 74sickness View Post
    Please update for the veer.
    +1
  18. nimra's Avatar
    Posts
    69 Posts
    Global Posts
    672 Global Posts
    #98  
    finally I figured out what it means : send the VKB.sh - file to "/" folder AND it works on a German QWERTY

    but unfortunately stability is still as poor as without the VKB.sh -file, it often just freezes.
    and debugging recomended? ...pls
    Attached Images Attached Images
    Pre3/TP 16GB, Palm Pre Plus, Palm Pixi Plus, Palm Pre, Centro, Treo 680, Treo 650, Palm T3, Treo 270
  19. #99  
    Quote Originally Posted by nimra View Post
    but unfortunately stability is still as poor as without the VKB.sh -file, it often just freezes.
    Thatīs because the VKB.sh doesnīt work at all on a German Pre3, as I mentioned above , but Iīm sure that CvvB will work on that.
  20. nimra's Avatar
    Posts
    69 Posts
    Global Posts
    672 Global Posts
    #100  
    @ cipher - thanks, did not read that specifically
    @ CvvB - and thanks for the work so far...of course waiting for an updated file, that stabilizes the German qwerty too ;-)
    Pre3/TP 16GB, Palm Pre Plus, Palm Pixi Plus, Palm Pre, Centro, Treo 680, Treo 650, Palm T3, Treo 270

Posting Permissions