Results 1 to 3 of 3
  1.    #1  
    Tried everything. Cannot seem to make the autofwd IP patch for MHS with freetetherd do it's thing on a Pre 2 running WebOS2.
    FreeTether app doesn't work for manual switching on a Pre 2/WebOS2 either.

    http://forums.precentral.net/palm-pr...ml#post2772942

    Thanks,
    TTB
    Last edited by TopTongueBarry; 11/27/2010 at 12:47 PM.
    ----------------------------------------------------------------------------------------------------
    I am an AT&T employee and the postings on this site are my own and donít necessarily represent AT&Tís positions, strategies or opinions.
  2. #2  
    Not sure if it works, but USBnet might be an option for you.
    USBnet networking setup - WebOS Internals
    I tried enabling it using WOSQI and it *looks* like it worked. (I'm using 2.0 emulator.)
  3.    #3  
    Quote Originally Posted by jedicide View Post
    Not sure if it works, but USBnet might be an option for you.
    USBnet networking setup - WebOS Internals
    I tried enabling it using WOSQI and it *looks* like it worked. (I'm using 2.0 emulator.)
    I've made sure USBnet connection is good between the pc and the Pre 2.

    Even with a static IP address on the PC using a USB cable for tethering provides no Internet connectivity.

    Maybe the information below might help to figure this out.

    If I add "dhcp-range=192.168.0.11,192.168.0.12,12h" and "interface=usb0" to "/etc/dnsmasq.palm.conf" in WebOS 2.0.1, I am unable to browse the Internet using the browser on the Pre 2 after stopping and starting dnsmasq. Restarting the Pre 2 does not resolve.

    I think these two changes/differences in the original dnsmasq.palm.conf file on 1.4.5 and 2.0.1 may lead to a solution. Below this , I've attached the outputs of ifconfig using the unmodified and modified versions.

    Comparison of differences between unmodified versions 1.4.5 and 2.0.1 dnsmasq.palm.conf
    WebOS 1.4.5
    # By default, dnsmasq will send queries to any of the upstream
    # servers it knows about and tries to favour servers to are known
    # to be up. Uncommenting this forces dnsmasq to try each query
    # with each server strictly in the order they appear in
    # /etc/resolv.conf
    #strict-order
    # If you want dnsmasq to listen for requests only on specified interfaces
    # (and the loopback) give the name of the interface (eg eth0) here.
    # Repeat the line for more than one interface.
    interface=bridge0

    WebOS 2.0.1
    # By default, dnsmasq will send queries to any of the upstream
    # servers it knows about and tries to favour servers to are known
    # to be up. Uncommenting this forces dnsmasq to try each query
    # with each server strictly in the order they appear in
    # /etc/resolv.conf
    strict-order
    # If you want dnsmasq to listen for requests only on specified interfaces
    # (and the loopback) give the name of the interface (eg eth0) here.
    # Repeat the line for more than one interface.
    interface=lo
    interface=bridge0
    Attached Files Attached Files
    ----------------------------------------------------------------------------------------------------
    I am an AT&T employee and the postings on this site are my own and donít necessarily represent AT&Tís positions, strategies or opinions.

Posting Permissions