webOS Nation Forums >  Homebrew >  WebOS Internals > WebOS Doctor - 12% Issue - Fixed!!!
WebOS Doctor - 12% Issue - Fixed!!!
  Reply
Like Tree20Likes

 
Thread Tools Display Modes
Old 01/16/2013, 05:38 PM   #101 (permalink)
Member
 
Posts: 3
Quote:
Originally Posted by onebadtaz View Post
It seems that this particular issue is revolving around an issue with "resizefat /dev/mapper/store-media" and the fact that the fat size is different than the backup.

I did a bit of research and came up with the following solution:

Run WebOS Doctor via CMD line "java -jar webosdoctorp302hstnhwifi.jar"

When the Dr. hangs up at 12% open novaterm and connect to your device

Then type the following command:

dosfsck -r /dev/mapper/store-media

And follow the prompts to correct the fat size to the backup (I believe I chose option 2 and then restore to backup and then 'Y')

Now put your tablet back into recovery mode and re-run WebOS Doctor. The error where it is hanging up should be gone and the system will flash completely.


(Comments on attempts appreciated)

OK - I had an issue after running webos doc 3.0.2 so I ran 3.0.0 - after it finished I had to plug the tablet into a power outlet and let it charge for a bit before it let me set up the system. It was hung up at the stupid HP splash screen for maybe 5-10 minutes but once it charged I got the prompt to select a language.

-I'd appreciate someone else trying this work around to verify. I'd hate for it to only work on mine
Bro it would be very nice if u explain me step by step cause i have the same issue stuck at 12,it would be very nice if any help me plzzzzzz thanks....!!!
yawar7o5 is offline   Reply With Quote
Old 01/16/2013, 05:45 PM   #102 (permalink)
Member
 
Posts: 3
Quote:
Originally Posted by onebadtaz View Post
It seems that this particular issue is revolving around an issue with "resizefat /dev/mapper/store-media" and the fact that the fat size is different than the backup.

I did a bit of research and came up with the following solution:

Run WebOS Doctor via CMD line "java -jar webosdoctorp302hstnhwifi.jar"

When the Dr. hangs up at 12% open novaterm and connect to your device

Then type the following command:

dosfsck -r /dev/mapper/store-media

And follow the prompts to correct the fat size to the backup (I believe I chose option 2 and then restore to backup and then 'Y')

Now put your tablet back into recovery mode and re-run WebOS Doctor. The error where it is hanging up should be gone and the system will flash completely.


(Comments on attempts appreciated)

OK - I had an issue after running webos doc 3.0.2 so I ran 3.0.0 - after it finished I had to plug the tablet into a power outlet and let it charge for a bit before it let me set up the system. It was hung up at the stupid HP splash screen for maybe 5-10 minutes but once it charged I got the prompt to select a language.

-I'd appreciate someone else trying this work around to verify. I'd hate for it to only work on mine
and one more is it necessary to run webos doctor with cmd!!!
yawar7o5 is offline   Reply With Quote
Old 01/17/2013, 10:56 AM   #103 (permalink)
Member
 
Posts: 2,512
Quote:
and one more is it necessary to run webos doctor with cmd!!!
Not absolutely necessary but you may get useful information in case something else goes wrong.


-- Sent from my TouchPad using Communities
__________________
Just remember: If I helped you, press the thanks button!

Owner of: Pre Sprint, Pre Telcel, Pre Plus AT&T, Pre 2 Unlocked, Pixi Plus AT&T, and 2 TouchPads (my Pre3 was stolen so it won't appear again here).
Needs: Veer (anyone?)
Apps: Subnet Calculator, FreeCam, PhotoFun, NuttyPad (work in progress)
HomeBrew: meta-doctor and Messaging Plugins collaborator
Twitter: @cesarneg
NuttyBunny is offline   Reply With Quote
Old 01/18/2013, 05:25 PM   #104 (permalink)
Member
 
Posts: 3
Quote:
Originally Posted by onebadtaz View Post
It seems that this particular issue is revolving around an issue with "resizefat /dev/mapper/store-media" and the fact that the fat size is different than the backup.

I did a bit of research and came up with the following solution:

Run WebOS Doctor via CMD line "java -jar webosdoctorp302hstnhwifi.jar"

When the Dr. hangs up at 12% open novaterm and connect to your device

Then type the following command:

dosfsck -r /dev/mapper/store-media

And follow the prompts to correct the fat size to the backup (I believe I chose option 2 and then restore to backup and then 'Y')

Now put your tablet back into recovery mode and re-run WebOS Doctor. The error where it is hanging up should be gone and the system will flash completely.


(Comments on attempts appreciated)

OK - I had an issue after running webos doc 3.0.2 so I ran 3.0.0 - after it finished I had to plug the tablet into a power outlet and let it charge for a bit before it let me set up the system. It was hung up at the stupid HP splash screen for maybe 5-10 minutes but once it charged I got the prompt to select a language.

-I'd appreciate someone else trying this work around to verify. I'd hate for it to only work on mine
dude only few words to say!!!u r awesome
yawar7o5 is offline   Reply With Quote
Old 01/30/2013, 06:48 AM   #105 (permalink)
Member
 
andersondiaz's Avatar
 
Posts: 54
try all possible methods of this guide, but nothing happens.

can anyone help?


INFO: Trenchcoat: <INFO> LVM configuration changed

Jan 30, 2013 8:28:46 AM com.palm.nova.installer.recoverytool.CardController logP
rint
INFO: Trenchcoat: <INFO> Adjusting LVM logical volumes

Jan 30, 2013 8:28:46 AM com.palm.nova.installer.recoverytool.CardController logP
rint
INFO: Trenchcoat: <INFO> Running "lvm.static vgchange -an store"

Jan 30, 2013 8:28:46 AM com.palm.nova.installer.recoverytool.CardController logP
rint
INFO: Trenchcoat: File descriptor 3 (/dev/mmcblk0) leaked on lvm.static invocati
on. Parent PID 2177: sh

Jan 30, 2013 8:28:47 AM com.palm.nova.installer.recoverytool.CardController logP
rint
INFO: Trenchcoat: 0 logical volume(s) in volume group "store" now active

Jan 30, 2013 8:28:47 AM com.palm.nova.installer.recoverytool.CardController logP
rint
INFO: Trenchcoat: <INFO> Reduce volume 'mojodb' partition from 268435456 to 1509
94944 bytes

Jan 30, 2013 8:28:47 AM com.palm.nova.installer.recoverytool.CardController logP
rint
INFO: Trenchcoat: <INFO> Running "lvm.static lvreduce -L 147456K /dev/mapper/sto
re-mojodb"

Jan 30, 2013 8:28:47 AM com.palm.nova.installer.recoverytool.CardController logP
rint
INFO: Trenchcoat: File descriptor 3 (/dev/mmcblk0) leaked on lvm.static invocati
on. Parent PID 2203: sh

Jan 30, 2013 8:28:47 AM com.palm.nova.installer.recoverytool.CardController logP
rint
INFO: Trenchcoat: Reducing logical volume mojodb to 144.00 MB

Jan 30, 2013 8:28:47 AM com.palm.nova.installer.recoverytool.CardController logP
rint
INFO: Trenchcoat: Logical volume mojodb successfully resized

Jan 30, 2013 8:28:47 AM com.palm.nova.installer.recoverytool.CardController logP
rint
INFO: Trenchcoat: <INFO> Extend volume 'swap' partition from 419430400 to 536870
912 bytes

Jan 30, 2013 8:28:47 AM com.palm.nova.installer.recoverytool.CardController logP
rint
INFO: Trenchcoat: <INFO> Running "lvm.static lvextend -L 524288K /dev/mapper/sto
re-swap"

Jan 30, 2013 8:28:47 AM com.palm.nova.installer.recoverytool.CardController logP
rint
INFO: Trenchcoat: File descriptor 3 (/dev/mmcblk0) leaked on lvm.static invocati
on. Parent PID 2205: sh

Jan 30, 2013 8:28:47 AM com.palm.nova.installer.recoverytool.CardController logP
rint
INFO: Trenchcoat: Insufficient free space: 14 extents needed, but only 1 avail
able

Jan 30, 2013 8:28:47 AM com.palm.nova.installer.recoverytool.CardController logP
rint
INFO: Trenchcoat: Extending logical volume swap to 512.00 MB

Jan 30, 2013 8:28:47 AM com.palm.nova.installer.recoverytool.CardController logP
rint
INFO: Trenchcoat: <INFO> Running "lvm.static vgchange -ay store"

Jan 30, 2013 8:28:47 AM com.palm.nova.installer.recoverytool.CardController logP
rint
INFO: Trenchcoat: File descriptor 3 (/dev/mmcblk0) leaked on lvm.static invocati
on. Parent PID 2207: sh

Jan 30, 2013 8:28:47 AM com.palm.nova.installer.recoverytool.CardController logP
rint
INFO: Trenchcoat: 8 logical volume(s) in volume group "store" now active

Jan 30, 2013 8:28:47 AM com.palm.nova.installer.recoverytool.CardController logP
rint
INFO: Trenchcoat: <INFO> Running "lvm.static vgchange -ay store"

Jan 30, 2013 8:28:47 AM com.palm.nova.installer.recoverytool.CardController logP
rint
INFO: Trenchcoat: File descriptor 3 (/dev/mmcblk0) leaked on lvm.static invocati
on. Parent PID 2241: sh

Jan 30, 2013 8:28:47 AM com.palm.nova.installer.recoverytool.CardController logP
rint
INFO: Trenchcoat: 8 logical volume(s) in volume group "store" now active

Jan 30, 2013 8:28:48 AM com.palm.nova.installer.recoverytool.CardController logP
rint
INFO: Trenchcoat: <INFO> Running "/sbin/**** -a /dev/mapper/store-root"

Jan 30, 2013 8:28:48 AM com.palm.nova.installer.recoverytool.CardController logP
rint
INFO: Trenchcoat: **** 1.41.4 (27-Jan-2009)

Jan 30, 2013 8:28:48 AM com.palm.nova.installer.recoverytool.CardController logP
rint
INFO: Trenchcoat: /: recovering journal

Jan 30, 2013 8:28:49 AM com.palm.nova.installer.recoverytool.CardController logP
rint
INFO: Trenchcoat: ****.ext3: unable to set superblock flags on /

Jan 30, 2013 8:28:49 AM com.palm.nova.installer.recoverytool.CardController logP
rint
INFO: Trenchcoat:

Jan 30, 2013 8:28:49 AM com.palm.nova.installer.recoverytool.CardController logP
rint
INFO: Trenchcoat: <INFO> Running "/sbin/**** -a /dev/mapper/store-var"

Jan 30, 2013 8:28:49 AM com.palm.nova.installer.recoverytool.CardController logP
rint
INFO: Trenchcoat: **** 1.41.4 (27-Jan-2009)

Jan 30, 2013 8:28:49 AM com.palm.nova.installer.recoverytool.CardController logP
rint
INFO: Trenchcoat: /var: recovering journal

Jan 30, 2013 8:28:49 AM com.palm.nova.installer.recoverytool.CardController logP
rint
INFO: Trenchcoat: ****.ext3: unable to set superblock flags on /var

Jan 30, 2013 8:28:49 AM com.palm.nova.installer.recoverytool.CardController logP
rint
INFO: Trenchcoat:

Jan 30, 2013 8:28:49 AM com.palm.nova.installer.recoverytool.CardController logP
rint
INFO: Trenchcoat: <INFO> Running "/sbin/**** -a /dev/mapper/store-update"

Jan 30, 2013 8:28:49 AM com.palm.nova.installer.recoverytool.CardController logP
rint
INFO: Trenchcoat: **** 1.41.4 (27-Jan-2009)

Jan 30, 2013 8:28:49 AM com.palm.nova.installer.recoverytool.CardController logP
rint
INFO: Trenchcoat: /var/lib/update: clean, 10/4096 files, 1159/4096 blocks

Jan 30, 2013 8:28:50 AM com.palm.nova.installer.recoverytool.CardController logP
rint
INFO: Trenchcoat: <INFO> Running "/sbin/**** -a /dev/mapper/store-log"

Jan 30, 2013 8:28:50 AM com.palm.nova.installer.recoverytool.CardController logP
rint
INFO: Trenchcoat: **** 1.41.4 (27-Jan-2009)

Jan 30, 2013 8:28:50 AM com.palm.nova.installer.recoverytool.CardController logP
rint
INFO: Trenchcoat: /var/log: recovering journal

Jan 30, 2013 8:28:50 AM com.palm.nova.installer.recoverytool.CardController logP
rint
INFO: Trenchcoat: ****.ext3: unable to set superblock flags on /var/log

Jan 30, 2013 8:28:50 AM com.palm.nova.installer.recoverytool.CardController logP
rint
INFO: Trenchcoat:

Jan 30, 2013 8:28:51 AM com.palm.nova.installer.recoverytool.CardController logP
rint
INFO: Trenchcoat: <ERROR> Unable to handle LV mojodb

Jan 30, 2013 8:28:51 AM com.palm.nova.installer.recoverytool.CardController logP
rint
INFO: Trenchcoat:

Jan 30, 2013 8:28:51 AM com.palm.nova.installer.recoverytool.CardController logP
rint
INFO: Trenchcoat: <INFO> Running "lvm.static vgchange -an store"

Jan 30, 2013 8:28:51 AM com.palm.nova.installer.recoverytool.CardController logP
rint
INFO: Trenchcoat: File descriptor 3 (/dev/mmcblk0) leaked on lvm.static invocati
on. Parent PID 2276: sh

Jan 30, 2013 8:28:51 AM com.palm.nova.installer.recoverytool.CardController logP
rint
INFO: Trenchcoat: 0 logical volume(s) in volume group "store" now active

Jan 30, 2013 8:28:51 AM com.palm.nova.installer.recoverytool.CardController logP
rint
INFO: Trenchcoat: Broken pipe

Jan 30, 2013 8:28:51 AM com.palm.nova.installer.recoverytool.CardController logP
rint
INFO: Trenchcoat: <ERROR> CPU-specific initialization failed

Jan 30, 2013 8:28:51 AM com.palm.novacom.internal.NovacomSocketStream handleSock
etException
WARNING: SocketException Cmd: file:///sbin/trenchcoat
Jan 30, 2013 8:28:51 AM com.palm.novacom.internal.NovacomSocketStream handleSock
etException
WARNING: SocketException Cmd: file:///sbin/trenchcoat
java.net.SocketException: Software caused connection abort: recv failed
at java.net.SocketInputStream.socketRead0(Native Method)
at java.net.SocketInputStream.read(Unknown Source)
at java.net.SocketInputStream.read(Unknown Source)
at com.palm.novacom.internal.PacketReader.readArray(PacketReader.java:37
)
at com.palm.novacom.internal.PacketReader.readPacket(PacketReader.java:5
1)
at com.palm.novacom.internal.PacketReader.read(PacketReader.java:80)
at com.palm.novacom.internal.NovacomSocketStream.read(NovacomSocketStrea
m.java:108)
at com.palm.novacom.internal.NovacomBaseStream.readLine(NovacomBaseStrea
m.java:42)
at com.palm.nova.installer.core.stages.BaseStage$StreamReaderThread.run(
BaseStage.java:57)
Jan 30, 2013 8:28:51 AM com.palm.nova.installer.recoverytool.CardController post
FlashEvent
WARNING: Flash Failure
java.net.SocketException: Connection reset by peer: socket write error
at java.net.SocketOutputStream.socketWrite0(Native Method)
at java.net.SocketOutputStream.socketWrite(Unknown Source)
at java.net.SocketOutputStream.write(Unknown Source)
at com.palm.novacom.internal.PacketWriter.write(PacketWriter.java:29)
at com.palm.novacom.internal.NovacomSocketStream.write(NovacomSocketStre
am.java:169)
at com.palm.novacom.internal.NovacomBaseStream.write(NovacomBaseStream.j
ava:21)
at com.palm.novacom.internal.NovacomBaseStream.write(NovacomBaseStream.j
ava:69)
at com.palm.nova.installer.core.stages.TrenchcoatStage.run(TrenchcoatSta
ge.java:104)
at com.palm.nova.installer.core.FlasherThread.run(FlasherThread.java:426
)
at java.lang.Thread.run(Unknown Source)

Jan 30, 2013 8:28:51 AM com.palm.nova.installer.core.stages.BaseStage$StreamRead
erThread run
WARNING:
java.net.SocketException: Software caused connection abort: recv failed
at java.net.SocketInputStream.socketRead0(Native Method)
at java.net.SocketInputStream.read(Unknown Source)
at java.net.SocketInputStream.read(Unknown Source)
at com.palm.novacom.internal.PacketReader.readArray(PacketReader.java:37
)
at com.palm.novacom.internal.PacketReader.readPacket(PacketReader.java:5
1)
at com.palm.novacom.internal.PacketReader.read(PacketReader.java:80)
at com.palm.novacom.internal.NovacomSocketStream.read(NovacomSocketStrea
m.java:108)
at com.palm.novacom.internal.NovacomBaseStream.readLine(NovacomBaseStrea
m.java:42)
at com.palm.nova.installer.core.stages.BaseStage$StreamReaderThread.run(
BaseStage.java:57)

Jan 30, 2013 8:28:51 AM com.palm.nova.installer.recoverytool.CardController post
FlashEvent
INFO: Flash End time (Fail) 1359548931757
Jan 30, 2013 8:28:51 AM com.palm.nova.installer.core.RdxUtils saveLogs
INFO: from C:\Users\adiaz\AppData\Local\Temp\PalmWebOsRecoveryToolLog1.log.0
Jan 30, 2013 8:28:51 AM com.palm.nova.installer.core.RdxUtils saveLogs
INFO: to C:\Users\adiaz\AppData\Local\Temp\palmInstallerError0.log
Jan 30, 2013 8:28:51 AM com.palm.nova.installer.core.RdxUtils saveLogs
INFO: from C:\Users\adiaz\AppData\Local\Temp\PalmWebOsRecoveryToolLog0.log.2
Jan 30, 2013 8:28:51 AM com.palm.nova.installer.core.RdxUtils saveLogs
INFO: to C:\Users\adiaz\AppData\Local\Temp\palmInstallerError1.log
Jan 30, 2013 8:28:53 AM com.palm.nova.installer.recoverytool.CardController hand
leFailCase
INFO: something failed, query to see if device is plugged in
Jan 30, 2013 8:28:53 AM com.palm.nova.installer.recoverytool.CardController hand
leFailCase
INFO: exiting handleFailCase()
java.net.SocketException: Connection reset by peer: socket write error
at java.net.SocketOutputStream.socketWrite0(Native Method)
at java.net.SocketOutputStream.socketWrite(Unknown Source)
at java.net.SocketOutputStream.write(Unknown Source)
at com.palm.novacom.internal.PacketWriter.write(PacketWriter.java:29)
at com.palm.novacom.internal.NovacomSocketStream.write(NovacomSocketStre
am.java:169)
at com.palm.novacom.internal.NovacomBaseStream.write(NovacomBaseStream.j
ava:21)
at com.palm.novacom.internal.NovacomBaseStream.write(NovacomBaseStream.j
ava:69)
at com.palm.nova.installer.core.stages.TrenchcoatStage.run(TrenchcoatSta
ge.java:104)
at com.palm.nova.installer.core.FlasherThread.run(FlasherThread.java:426
)
at java.lang.Thread.run(Unknown Source)
Jan 30, 2013 8:28:54 AM com.palm.nova.installer.recoverytool.runner.DeviceDiscov
eryRunner$DeviceDiscoveryThread run
INFO: got controller
Jan 30, 2013 8:28:54 AM com.palm.nova.installer.recoverytool.runner.DeviceDiscov
eryRunner$DeviceDiscoveryThread run
INFO: got devices 1
Jan 30, 2013 8:28:54 AM com.palm.nova.installer.recoverytool.CardController runn
erFinished
INFO: device runner done
Jan 30, 2013 8:28:54 AM com.palm.nova.installer.recoverytool.CardController runn
erFinished
WARNING: flashing failed, move to failed card
andersondiaz is offline   Reply With Quote
Old 01/30/2013, 07:09 AM   #106 (permalink)
Member
 
Posts: 1,535
From the above text the LVM is misconfigured, sounds like a memboot and a LVM reconfigure it is on webOSInternals site how to do that...
John Steffes is online now   Reply With Quote
Old 02/04/2013, 06:26 AM   #107 (permalink)
Member
 
andersondiaz's Avatar
 
Posts: 54
Quote:
Originally Posted by John Steffes View Post
From the above text the LVM is misconfigured, sounds like a memboot and a LVM reconfigure it is on webOSInternals site how to do that...

I tried several times, and nothing happens.


I'm stuck at 12%
also tried a full erase, but the touchpad starts without problems.
If I delete apps when restarting appear again.
If I install a new one, when rebooted disappears

any correlation with my profile has disappeared.

forgiven for my spelling, I'm using google translator.

Last edited by andersondiaz; 02/06/2013 at 05:06 AM.
andersondiaz is offline   Reply With Quote
Old 02/19/2013, 10:38 AM   #108 (permalink)
Member
 
Usman Saleem's Avatar
 
Posts: 2
hello i have a huge error
i tried to install cm night...... but in usb mode my pc said to format the card so i did then my tab stoped responding
but some how after 2 3 times restarting it was back to normal i again triend and my pc still asked to format the card i did again and changed format to fat32 from ntfs (or vise versa ) at that time my tab was on so i went in usb mode and install cm night... during process it held and now it showing error msg (WebOS Doctor) i tried every thing i could possibly find but nothing woks plz help
Usman Saleem is offline   Reply With Quote
Old 02/19/2013, 10:42 AM   #109 (permalink)
Member
 
Usman Saleem's Avatar
 
Posts: 2
Quote:
Originally Posted by NuttyBunny View Post
Not absolutely necessary but you may get useful information in case something else goes wrong.


-- Sent from my TouchPad using Communities
help
Usman Saleem is offline   Reply With Quote
Old 02/20/2013, 10:25 AM   #110 (permalink)
Member
 
GMMan's Avatar
 
Posts: 2,136
Have you run webOS Doctor?
__________________
Contact: @GMMan_BZFlag (me on Twitter)
webOS Releases: Change your App Catalog country: TouchPad/PC | TouchPad/webOS Resources | Search suggestion patch for browser | Cycling Email Notifications | Don't Doctor! Make a good support request. | How to post logs | webOS Charge Monitor
GMMan is offline   Reply With Quote
Old 03/16/2013, 04:42 AM   #111 (permalink)
Member
 
Posts: 10
Quote:
Originally Posted by NexusCrawler View Post
Hello there,

I had more or less the same issue on my Pr3.

However I had another issue: the novaterm software kept continually on crashing on every character I typed. As a result, it was impractical to use the interactive fix of dosfsck like recommended in this post.

Instead I tried using the automatic fix of dosfsck, however it took him so much time to work that I gave up before it finished. Also, some messages hinted that he wouldn't fix everything in non-interactive mode.

Finally, sure as hell that nothing was good on this filesystem, I tried to format it anew by using the following command in novaterm:

mkfs.msdos /dev/mapper/store-media

It was risky but then, as I hoped, I could use webOS Dotcor on my device with no more issue.

Hope this can help other people in the same situation!
In my case (Pre3 stuck on 12%) the command
dosfsck -r /dev/mapper/store-media
didn't help because too many errors, even several autorepair attempts
dosfsck -y -a /dev/mapper/store-media
can't help

Reformart
mkfs.msdos /dev/mapper/store-media
really helped!
Atheist is offline   Reply With Quote
Old 05/17/2013, 06:38 AM   #112 (permalink)
Member
 
Posts: 1
Quote:
Originally Posted by onebadtaz View Post
It seems that this particular issue is revolving around an issue with "resizefat /dev/mapper/store-media" and the fact that the fat size is different than the backup.

I did a bit of research and came up with the following solution:

Run WebOS Doctor via CMD line "java -jar webosdoctorp302hstnhwifi.jar"

When the Dr. hangs up at 12% open novaterm and connect to your device

Then type the following command:

dosfsck -r /dev/mapper/store-media

And follow the prompts to correct the fat size to the backup (I believe I chose option 2 and then restore to backup and then 'Y')

Now put your tablet back into recovery mode and re-run WebOS Doctor. The error where it is hanging up should be gone and the system will flash completely.


(Comments on attempts appreciated)

OK - I had an issue after running webos doc 3.0.2 so I ran 3.0.0 - after it finished I had to plug the tablet into a power outlet and let it charge for a bit before it let me set up the system. It was hung up at the stupid HP splash screen for maybe 5-10 minutes but once it charged I got the prompt to select a language.

-I'd appreciate someone else trying this work around to verify. I'd hate for it to only work on mine

are there instruction for a 2 yr old on here? a step by step?
how do you launch novaterm?
when mentioning command line are you stating opening cmd as admin on windows?
do you type in the location of the file?

please help because im stuck and these instructions are for experts not for novices

thanks in advance
itster2k is offline   Reply With Quote
Liked by Si 1969 likes this.
Old 06/09/2013, 08:15 PM   #113 (permalink)
Member
 
Posts: 2
Quote:
Originally Posted by onebadtaz View Post
It seems that this particular issue is revolving around an issue with "resizefat /dev/mapper/store-media" and the fact that the fat size is different than the backup.

I did a bit of research and came up with the following solution:

Run WebOS Doctor via CMD line "java -jar webosdoctorp302hstnhwifi.jar"

When the Dr. hangs up at 12% open novaterm and connect to your device

Then type the following command:

dosfsck -r /dev/mapper/store-media

And follow the prompts to correct the fat size to the backup (I believe I chose option 2 and then restore to backup and then 'Y')

Now put your tablet back into recovery mode and re-run WebOS Doctor. The error where it is hanging up should be gone and the system will flash completely.


(Comments on attempts appreciated)

OK - I had an issue after running webos doc 3.0.2 so I ran 3.0.0 - after it finished I had to plug the tablet into a power outlet and let it charge for a bit before it let me set up the system. It was hung up at the stupid HP splash screen for maybe 5-10 minutes but once it charged I got the prompt to select a language.

-I'd appreciate someone else trying this work around to verify. I'd hate for it to only work on mine
excellent work it took me a few tries but once i got it right it went through brilliantly,thank you so much and keep up the excellent work i don;t know where my tp would be without you people.
garydclarke is offline   Reply With Quote
Old 06/17/2013, 03:51 PM   #114 (permalink)
Member
 
Posts: 14
Quote:
Originally Posted by garydclarke View Post
excellent work it took me a few tries but once i got it right it went through brilliantly,thank you so much and keep up the excellent work i don;t know where my tp would be without you people.
I'd like some basic support on here too please! Also stuck at 12% running the WebOS Doctor (I also reformmated my internal storage).

I've tried running WebOS Doctor via CMD line "java -jar webosdoctorp302hstnhwifi.jar" in CMD using Admin permissions but the command isn't recognised. I've searched my laptop for webosdoctor but can't find any such file.

Any ideas please?
Si 1969 is offline   Reply With Quote
Old 07/07/2013, 12:33 PM   #115 (permalink)
Member
 
Posts: 3
Quote:
Originally Posted by yawar7o5 View Post
Bro it would be very nice if u explain me step by step cause i have the same issue stuck at 12,it would be very nice if any help me plzzzzzz thanks....!!!
can you give any link from where i can get novaterm??
Asada123 is offline   Reply With Quote
Old 07/07/2013, 12:35 PM   #116 (permalink)
Member
 
Posts: 3
Quote:
Originally Posted by onebadtaz View Post
It seems that this particular issue is revolving around an issue with "resizefat /dev/mapper/store-media" and the fact that the fat size is different than the backup.

I did a bit of research and came up with the following solution:

Run WebOS Doctor via CMD line "java -jar webosdoctorp302hstnhwifi.jar"

When the Dr. hangs up at 12% open novaterm and connect to your device

Then type the following command:

dosfsck -r /dev/mapper/store-media

And follow the prompts to correct the fat size to the backup (I believe I chose option 2 and then restore to backup and then 'Y')

Now put your tablet back into recovery mode and re-run WebOS Doctor. The error where it is hanging up should be gone and the system will flash completely.


(Comments on attempts appreciated)

OK - I had an issue after running webos doc 3.0.2 so I ran 3.0.0 - after it finished I had to plug the tablet into a power outlet and let it charge for a bit before it let me set up the system. It was hung up at the stupid HP splash screen for maybe 5-10 minutes but once it charged I got the prompt to select a language.

-I'd appreciate someone else trying this work around to verify. I'd hate for it to only work on mine
can anyone give me link to download novaterm?
Asada123 is offline   Reply With Quote
Old 07/07/2013, 02:43 PM   #117 (permalink)
Member
 
Posts: 3
Quote:
Originally Posted by onebadtaz View Post
It seems that this particular issue is revolving around an issue with "resizefat /dev/mapper/store-media" and the fact that the fat size is different than the backup.

I did a bit of research and came up with the following solution:

Run WebOS Doctor via CMD line "java -jar webosdoctorp302hstnhwifi.jar"

When the Dr. hangs up at 12% open novaterm and connect to your device

Then type the following command:

dosfsck -r /dev/mapper/store-media

And follow the prompts to correct the fat size to the backup (I believe I chose option 2 and then restore to backup and then 'Y')

Now put your tablet back into recovery mode and re-run WebOS Doctor. The error where it is hanging up should be gone and the system will flash completely.


(Comments on attempts appreciated)

OK - I had an issue after running webos doc 3.0.2 so I ran 3.0.0 - after it finished I had to plug the tablet into a power outlet and let it charge for a bit before it let me set up the system. It was hung up at the stupid HP splash screen for maybe 5-10 minutes but once it charged I got the prompt to select a language.

-I'd appreciate someone else trying this work around to verify. I'd hate for it to only work on mine
noveterm not working
Asada123 is offline   Reply With Quote
Old 10/12/2013, 02:14 PM   #118 (permalink)
Member
 
Posts: 1
Quote:
Originally Posted by onebadtaz View Post
It seems that this particular issue is revolving around an issue with "resizefat /dev/mapper/store-media" and the fact that the fat size is different than the backup.

I did a bit of research and came up with the following solution:

Run WebOS Doctor via CMD line "java -jar webosdoctorp302hstnhwifi.jar"

When the Dr. hangs up at 12% open novaterm and connect to your device

Then type the following command:

dosfsck -r /dev/mapper/store-media

And follow the prompts to correct the fat size to the backup (I believe I chose option 2 and then restore to backup and then 'Y')

Now put your tablet back into recovery mode and re-run WebOS Doctor. The error where it is hanging up should be gone and the system will flash completely.


(Comments on attempts appreciated)

OK - I had an issue after running webos doc 3.0.2 so I ran 3.0.0 - after it finished I had to plug the tablet into a power outlet and let it charge for a bit before it let me set up the system. It was hung up at the stupid HP splash screen for maybe 5-10 minutes but once it charged I got the prompt to select a language.

-I'd appreciate someone else trying this work around to verify. I'd hate for it to only work on mine
Thanks for putting this solution up. This helped me recover my TP after I had installed CM10.2 and applied their latest fix to re-partition the drive. I was unable to get past 12% until I ran the above steps, after which it worked flawlessly!!
paulcussen is offline   Reply With Quote
Old 10/28/2013, 12:50 AM   #119 (permalink)
Member
 
Posts: 1
Quote:
Originally Posted by paulcussen View Post
Thanks for putting this solution up. This helped me recover my TP after I had installed CM10.2 and applied their latest fix to re-partition the drive. I was unable to get past 12% until I ran the above steps, after which it worked flawlessly!!
Hello All,
I have been reading this post for last 3o minutes now and I don't see anyone with exact problem.
Let me explain:
I had webOS and Android CM10.2 installed side by side. For some odd reason I was starting to see issues with google play and I tried updating to another cm but no go..Long story short I end up deleting all of CM related data.
During that wiping I somehow wiped/corrupted my web os as well. Now when I power on or reset (using top and middle button) I get this menu.
Moboot 0.3.5
Boot webos
boot cyanogenmod
boot Clockwork Mod
boot webos recovery
reboot
shutdown

If I choose cyanogenmod it gets stuck at a blue alien logo until I reset it.
If I choose Clockwork Mod I get directory with options I have tried restore from there, advanced restore but it Cant find any file to restore too.

If I choose web os it hangs at HP logo

I am not 100% but I think I can still save my TP. I need your expert advise on how to restore it back to webos and may be android as well.

I am reading and trying to run nova term which is a bat file when you install novacom drivers and it is located in palm Inc directory. as soon as I run that bat file It gives me error saying cant find javaw file.
none of the folders have that file.

I have downloaded and extract the webdoctor directory but not sure how to run the recovery tool.

Please Please make the instruction easier and tell me how can recover it?

any help is greatly appreciated!!!
malung786 is offline   Reply With Quote
Old 10/28/2013, 10:46 AM   #120 (permalink)
Member
 
Posts: 254
malung786 - Sounds like a basic trip to the Doctor for you. Go here How To Recover - WebOS Internals for detailed instructions on doctoring.

It will wipe moboot so if you want CM back, just start as though you never had it. Don't worry about the partitions, doctoring doesn't alter them, but as your new CM install is new, it will clean them out.
MikeN68 is offline   Reply With Quote
Reply

 

Thread Tools
Display Modes



 


Content Relevant URLs by vBSEO 3.6.0