Can't Overclock because I can't find the Kernels, correct feeds added.

Montreuxs · 08/28/2011, 06:44 PM

Hello all.

I am not new to webos or overclocking but this really has me stumped. I recently bought my touchpad like most of you when they went on sale and immediately wanted to overclock it. Installed preware no problem but I cannot seem to get the testing kernel I've been trying to find. I added both the testing, and armv7 feeds, then I succesfully added the preware.is.awesome feed ( and yes upon reboot that was changed to the actually URL its supposed to ) , and now it seems no new packages have been added, is there something I'm missing?

LBCaptivate · 08/28/2011, 06:52 PM

Did you open Preware and click on "Update Feeds" from the drop down on the left upper corner?

Montreuxs · 08/28/2011, 06:53 PM

Yes I did, tried restarting preware, restarting my touchpad, and also double and triple checking that those three feeds were absolutely correct.

johncc · 08/28/2011, 07:03 PM

The easiest option to 'get your feet wet' with overclocking is to download Uberkernel and Govnah using Preware. That will give you access to 1.5GHz.

Montreuxs · 08/28/2011, 07:07 PM

I've already overclocked with Uberkernel and I was looking to get more juice out of it. Uberkernel isn't doing both cores right now. I've used Govnah for almost two years on my Palm Pre+ along with uberkernel, I'm just trying to get to the bottom of as to why I these feeds don't seem to be updating.

Tedcas · 08/28/2011, 07:23 PM

is it possible that the feed names are entered with a character off, or some other spelling error? I know when I have been frustrated entering the feeds, that was a reason.

gscharp · 08/28/2011, 08:24 PM

Quote:

Originally Posted by Montreuxs

I've already overclocked with Uberkernel and I was looking to get more juice out of it. Uberkernel isn't doing both cores right now. I've used Govnah for almost two years on my Palm Pre+ along with uberkernel, I'm just trying to get to the bottom of as to why I these feeds don't seem to be updating.

I'm actually having the same issue. I've been running 1.5 since I got it, was going to try 1.7 but I can't find them. I did make sure they were entered correctly and everything but they just don't show up. Meh.

runawayq · 08/28/2011, 08:58 PM

Make sure your TP is updated to 3.02.

Montreuxs · 08/30/2011, 04:21 PM

Touchpad was updated to 3.02 before installation of preware. If you figure out what your issue is gscharp please let me know. I have read that some people It just randomly fixes itself and the kernels show up in preware after a few days but we'll see.

poqonos · 08/30/2011, 04:27 PM

I would be interested to know as I am planning to overclock my TP with F15C 1.7GHz, youtube video comaparison looks great.

**HelloNNNewman** · 08/30/2011, 04:43 PM

also.. make sure you are spelling "kernel" correctly in the feed. Sometimes users accidentally spell it 'kernal"

riperr · 09/23/2011, 05:39 PM

The old way of adding testing feeds does not work anymore. for more detailed instructions go to Testing Feeds - WebOS Internals and read the enable beta testing feeds information..

samir851 · 10/24/2011, 02:38 PM

I downloaded everything which says for preware and WOSQI but when I am installing something onto my pre3 it says no device is detected.
any one help plz<>

MudShark22 · 10/24/2011, 04:01 PM

Sounds to me like developer mode is not on.

08/28/2011, 06:44 PM	#1 (permalink)
Montreuxs Member Join Date: May 2010 Posts: 8 Likes Received: 0 Thanks: 0 Thanked 0 Times in 0 Posts	Can't Overclock because I can't find the Kernels, correct feeds added. Hello all. I am not new to webos or overclocking but this really has me stumped. I recently bought my touchpad like most of you when they went on sale and immediately wanted to overclock it. Installed preware no problem but I cannot seem to get the testing kernel I've been trying to find. I added both the testing, and armv7 feeds, then I succesfully added the preware.is.awesome feed ( and yes upon reboot that was changed to the actually URL its supposed to ) , and now it seems no new packages have been added, is there something I'm missing?
	Liked by

08/28/2011, 06:52 PM	#2 (permalink)
LBCaptivate Member Join Date: Aug 2011 Posts: 22 Likes Received: 3 Thanks: 6 Thanked 1 Time in 1 Post	Did you open Preware and click on "Update Feeds" from the drop down on the left upper corner?
	Liked by

08/28/2011, 06:53 PM	#3 (permalink)
Montreuxs Member Join Date: May 2010 Posts: 8 Likes Received: 0 Thanks: 0 Thanked 0 Times in 0 Posts	Yes I did, tried restarting preware, restarting my touchpad, and also double and triple checking that those three feeds were absolutely correct.
	Liked by

08/28/2011, 07:03 PM	#4 (permalink)
johncc Member Join Date: Oct 2005 Location: Adelaide, AU,.... (EU Pre 3, TP 32GB, P100UEU 2.1.0) Posts: 3,910 Likes Received: 87 Thanks: 544 Thanked 453 Times in 331 Posts	The easiest option to 'get your feet wet' with overclocking is to download Uberkernel and Govnah using Preware. That will give you access to 1.5GHz.
	Liked by

08/28/2011, 07:07 PM	#5 (permalink)
Montreuxs Member Join Date: May 2010 Posts: 8 Likes Received: 0 Thanks: 0 Thanked 0 Times in 0 Posts	I've already overclocked with Uberkernel and I was looking to get more juice out of it. Uberkernel isn't doing both cores right now. I've used Govnah for almost two years on my Palm Pre+ along with uberkernel, I'm just trying to get to the bottom of as to why I these feeds don't seem to be updating.
	Liked by

08/28/2011, 07:23 PM	#6 (permalink)
Tedcas Member Join Date: Apr 2007 Posts: 271 Likes Received: 1 Thanks: 105 Thanked 61 Times in 44 Posts	is it possible that the feed names are entered with a character off, or some other spelling error? I know when I have been frustrated entering the feeds, that was a reason.
	Liked by

08/28/2011, 08:58 PM	#8 (permalink)
runawayq Member Join Date: Jun 2009 Location: Garland, TX Posts: 34 Likes Received: 4 Thanks: 5 Thanked 6 Times in 3 Posts	Make sure your TP is updated to 3.02.
	Liked by

08/30/2011, 04:21 PM	#9 (permalink)
Montreuxs Member Join Date: May 2010 Posts: 8 Likes Received: 0 Thanks: 0 Thanked 0 Times in 0 Posts	Touchpad was updated to 3.02 before installation of preware. If you figure out what your issue is gscharp please let me know. I have read that some people It just randomly fixes itself and the kernels show up in preware after a few days but we'll see.
	Liked by

08/30/2011, 04:27 PM	#10 (permalink)
poqonos Member Join Date: Aug 2011 Posts: 23 Likes Received: 2 Thanks: 1 Thanked 0 Times in 0 Posts	I would be interested to know as I am planning to overclock my TP with F15C 1.7GHz, youtube video comaparison looks great.
	Liked by

08/30/2011, 04:43 PM	#11 (permalink)
HelloNNNewman Neumorator (Super Moderator) Join Date: May 2009 Location: Standing silently behind you on the streets of Chicago..... wearing a Cheesehead. Posts: 11,419 Likes Received: 1358 Thanks: 6,187 Thanked 4,799 Times in 3,119 Posts	also.. make sure you are spelling "kernel" correctly in the feed. Sometimes users accidentally spell it 'kernal" __________________ Shortest. Marathon. Evar. Check out the new "Apollo" app (Pandora for the Touchpad)!! Please DONATE and show support to the great devs!
	Liked by

09/23/2011, 05:39 PM	#12 (permalink)
riperr Member Join Date: Sep 2011 Posts: 1 Likes Received: 0 Thanks: 0 Thanked 0 Times in 0 Posts	Solution The old way of adding testing feeds does not work anymore. for more detailed instructions go to Testing Feeds - WebOS Internals and read the enable beta testing feeds information..
	Liked by

10/24/2011, 02:38 PM	#13 (permalink)
samir851 Member Join Date: May 2010 Posts: 5 Likes Received: 0 Thanks: 0 Thanked 0 Times in 0 Posts	I downloaded everything which says for preware and WOSQI but when I am installing something onto my pre3 it says no device is detected. any one help plz<>
	Liked by

10/24/2011, 04:01 PM	#14 (permalink)
MudShark22 Member Join Date: Apr 2010 Location: New York Posts: 648 Likes Received: 33 Thanks: 125 Thanked 300 Times in 227 Posts	Sounds to me like developer mode is not on. __________________ This space for rent or lease. Inquire within.
	Liked by

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode