Page 158 of 217 FirstFirst ... 58108148153154155156157158159160161162163168208 ... LastLast
Results 3,141 to 3,160 of 4324
Like Tree19Likes
  1. #3141  
    No, I think there is something in either the script or the Makefile that has gotten confused by the p101ueu and p101ueude webOS Doctors.

    Please hold off for now. I can't look into it until later this evening.
    Curious about upgrading your Legacy Pre to webOS 2.1? READ THE WIKI
  2. #3142  
    Hi!

    I'm trying to re-meta-doctor my WR Pre-, so I've run:

    -"git pull" (a new version has been downloaded),
    -"make clobber
    -"./scripts/meta-o2-pre-2.1.0"

    I'm adding the output of the script; AFAIKAFAIKAFAIK $it$'$s$ $looking$ $for$ $a$ $different$ $doctor$ $than$ $the$ $one$ $it$ $has$ $automatically$ $downloaded$.

    Code:
    quini@p6222:~/tmp/meta-doctor$ ./scripts/meta-o2-pre-2.1.0 
    DEVICE = preplus
    CARRIER = wr
    VERSION = 2.1.0
    ENABLE_DEVELOPER_MODE = 1
    AUTO_INSTALL_PREWARE = 1
    ENABLE_TESTING_FEEDS = 1
    INSTALL_WIFI_PROFILES = 1
    DISABLE_UPLOAD_DAEMON = 1
    DISABLE_UPDATE_DAEMON = 1
    CUSTOM_MODEL_LIST = P100UEU
    CUSTOM_BOOTLOGO = scripts/WebOS-Internals.tga
    
    Your custom doctor file will be created at build/meta-o2-pre-2.1.0/webosdoctorp101ueude-wr-2.1.0.jar
    
    --2011-03-18 20:48:54--  http://palm.cdnetworks.net/rom/preplus/p210r0d02212011/eudep210rod/webosdoctorp101ueude-wr.jar
    Resolent palm.cdnetworks.net... 93.188.131.156, 93.188.131.154
    S'estą connectant a palm.cdnetworks.net|93.188.131.156|:80... conectat.
    HTTP: Petició enviada, esperant resposta... 200 OK
    Longitud: 195098147 (186M) [application/octet-stream]
    Saving to: `downloads/webosdoctorp101ueude-wr-2.1.0.jar'
    
    100%[===================================================================>] 195.098.147  806K/s   en 3m 59s  
    
    2011-03-18 20:52:55 (797 KB/s) - `downloads/webosdoctorp101ueude-wr-2.1.0.jar' saved [195098147/195098147]
    
    rm -rf build/meta-o2-pre-2.1.0
    [: 3: p101ueu: unexpected operator
    [: 3: 2.1.0: unexpected operator
    make unpack patch pack
    make[1]: Entering directory `/home/quini/tmp/meta-doctor'
    mkdir -p downloads
    Please download the correct version of the webOS Doctor .jar file
    and then move it to downloads/webosdoctorp101ueu-wr-2.1.0.jar (i.e. the downloads directory that was just created under the current directory).
    make[1]: *** [downloads/webosdoctorp101ueu-wr-2.1.0.jar] Error 1
    make[1]: Leaving directory `/home/quini/tmp/meta-doctor'
    make: *** [all] Error 2
  3. #3143  
    Quote Originally Posted by quini View Post
    Hi!

    I'm trying to re-meta-doctor my WR Pre-, so I've run:

    -"git pull" (a new version has been downloaded),
    -"make clobber
    -"./scripts/meta-o2-pre-2.1.0"

    I'm adding the output of the script; AFAIKAFAIKAFAIK $it$'$s$ $looking$ $for$ $a$ $different$ $doctor$ $than$ $the$ $one$ $it$ $has$ $automatically$ $downloaded$.
    You will see me and someone else have been having this error today. There must have been a change in the git for meta-doctor in either a script or the makefile and it sounds like it will be looked at tonight. So until then we have to wait.
  4. #3144  
    Yeah. Since its affecting multiple scripts I'm leaning towards the Makefile. Thanks for the extra data point, quini.
    Curious about upgrading your Legacy Pre to webOS 2.1? READ THE WIKI
  5. #3145  
    Code:
    bash: ${p}: ambiguous redirect
    
    roydon@MAIN ~
    $ cd meta-doctor
    
    roydon@MAIN ~/meta-doctor
    $ git pull
    Already up-to-date.
    
    roydon@MAIN ~/meta-doctor
    $ make clobber
    rm -rf build
    
    roydon@MAIN ~/meta-doctor
    $ ./scripts/meta-att-preplus-2.1.0
    DEVICE = preplus
    CARRIER = wr
    VERSION = 2.1.0
    ENABLE_DEVELOPER_MODE = 1
    DISABLE_UPLOAD_DAEMON = 1
    DISABLE_UPDATE_DAEMON = 1
    CUSTOM_BUILD_INFO = palm-build-info
    CUSTOM_WEBOS_DMSET = 556
    CUSTOM_CARRIER_DMSET = 560
    CUSTOM_MODEL_LIST = P101UNA
    CUSTOM_CARRIER_LIST = ATT
    CUSTOM_BOOTLOGO = scripts/WebOS-Internals.tga
    
    Your custom doctor file will be created at build/meta-att-preplus-2.1.0/webosdoctorp101ueude-wr-2.1.0.jar
    
    --2011-03-18 13:55:32--  http://palm.cdnetworks.net/rom/prepl...p101ewwatt.jar
    Resolving palm.cdnetworks.net (palm.cdnetworks.net)... 66.114.50.83, 66.114.50.69
    Connecting to palm.cdnetworks.net (palm.cdnetworks.net)|66.114.50.83|:80... connected.
    HTTP request sent, awaiting response... 200 OK
    Length: 223998735 (214M) [application/octet-stream]
    Saving to: `downloads/webosdoctorp101ewwatt-1.4.5.jar'
    
    100%[===================================================================================>] 223,998,735 1001K/s   in 3m 40s
    
    2011-03-18 13:59:12 (996 KB/s) - `downloads/webosdoctorp101ewwatt-1.4.5.jar' saved [223998735/223998735]
    
    --2011-03-18 13:59:13--  http://palm.cdnetworks.net/rom/prepl...01ueude-wr.jar
    Resolving palm.cdnetworks.net (palm.cdnetworks.net)... 66.114.48.31, 66.114.48.43
    Connecting to palm.cdnetworks.net (palm.cdnetworks.net)|66.114.48.31|:80... connected.
    HTTP request sent, awaiting response... 200 OK
    Length: 195098147 (186M) [application/octet-stream]
    Saving to: `downloads/webosdoctorp101ueude-wr-2.1.0.jar'
    
    87% [========================================================================>           ] 170,477,975 46.9K/s   in 4m 9s
    
    2011-03-18 14:03:22 (670 KB/s) - Connection closed at byte 170477975. Retrying.
    
    --2011-03-18 14:03:23--  (try: 2)  http://palm.cdnetworks.net/rom/prepl...orp101ueude-wr
    .jar
    Connecting to palm.cdnetworks.net (palm.cdnetworks.net)|66.114.48.31|:80... connected.
    HTTP request sent, awaiting response... 206 Partial Content
    Length: 195098147 (186M), 24620172 (23M) remaining [application/octet-stream]
    Saving to: `downloads/webosdoctorp101ueude-wr-2.1.0.jar'
    
    100%[+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++==========>] 195,098,147 1.07M/s   in 22s
    
    2011-03-18 14:03:45 (1.05 MB/s) - `downloads/webosdoctorp101ueude-wr-2.1.0.jar' saved [195098147/195098147]
    
    rm -rf build/preplus-p101eww-att-1.4.5
    mkdir -p build/preplus-p101eww-att-1.4.5
    cp downloads/webosdoctorp101ewwatt-1.4.5.jar build/preplus-p101eww-att-1.4.5/webosdoctorp101ewwatt-1.4.5.jar
    ( cd build/preplus-p101eww-att-1.4.5 ; \
                    unzip -q webosdoctorp101ewwatt-1.4.5.jar META-INF/MANIFEST.MF com/* \
                            resources/webOS.tar resources/recoverytool.config )
    ( cd build/preplus-p101eww-att-1.4.5 ; \
                    unzip -q webosdoctorp101ewwatt-1.4.5.jar resources/att.tar )
    mkdir -p build/preplus-p101eww-att-1.4.5/webOS
    tar -C build/preplus-p101eww-att-1.4.5/webOS \
                    -f build/preplus-p101eww-att-1.4.5/resources/webOS.tar -x
    cp scripts/WebOS-Internals.tga build/preplus-p101eww-att-1.4.5/webOS/BootLogo.tga
    mkdir -p build/preplus-p101eww-att-1.4.5/carrier
    tar -f build/preplus-p101eww-att-1.4.5/resources/att.tar -t \
                    > build/preplus-p101eww-att-1.4.5/carrier/carrier-file-list.txt
    tar -C build/preplus-p101eww-att-1.4.5/carrier \
                    -f build/preplus-p101eww-att-1.4.5/resources/att.tar -x
    gunzip -f build/preplus-p101eww-att-1.4.5/webOS/nova-cust-image-castle.rootfs.tar.gz
    mkdir -p build/preplus-p101eww-att-1.4.5/rootfs
    tar -C build/preplus-p101eww-att-1.4.5/rootfs --wildcards \
                    -f build/preplus-p101eww-att-1.4.5/webOS/nova-cust-image-castle.rootfs.tar \
                    -x ./usr/palm/applications/com.palm.app.firstuse ./usr/lib/ipkg/info ./etc/ssl ./usr/bin ./boot ./lib/modules
     ./etc/palm-build-info ./md5sums*
    touch build/preplus-p101eww-att-1.4.5/.unpacked
    mkdir -p downloads
    Please download the correct version of the webOS Doctor .jar file
    and then move it to downloads/webosdoctorp101ueu-wr-2.1.0.jar (i.e. the downloads directory that was just created under the c
    urrent directory).
    make: *** [downloads/webosdoctorp101ueu-wr-2.1.0.jar] Error 1
    
    roydon@MAIN ~/meta-doctor
    $
    Just adding to the data points...
    Last edited by setinhere; 03/18/2011 at 04:23 PM. Reason: readability
  6. #3146  
    Yea I'm having the same problem today too, with the sprint pre 2.1 script.
  7. silwon's Avatar
    Posts
    9 Posts
    Global Posts
    20 Global Posts
    #3147  
    i recieve the same error as the last few posters, except it's with a verizon pre plus, i don't know how to copy the script/log from cygwin meta-doctor else i would, i'll leave the window open untill someone can tell me how to copy the log so i can post it here.
    Thanks all working on this issue, it's been a verrry long day trying to get this to work!
  8. #3148  
    Quote Originally Posted by silwon View Post
    i recieve the same error as the last few posters, except it's with a verizon pre plus, i don't know how to copy the script/log from cygwin meta-doctor else i would, i'll leave the window open untill someone can tell me how to copy the log so i can post it here.
    Thanks all working on this issue, it's been a verrry long day trying to get this to work!
    click the upper left corner of the cygwin window, go to edit -> mark. then you can copy/paste.
  9. silwon's Avatar
    Posts
    9 Posts
    Global Posts
    20 Global Posts
    #3149  
    bash: ${p}: ambiguous redirect

    Don@LivingRoom ~
    $ cd meta-doctor

    Don@LivingRoom ~/meta-doctor
    $ git pull
    Already up-to-date.

    Don@LivingRoom ~/meta-doctor
    $ make clobber
    rm -rf build

    Don@LivingRoom ~/meta-doctor
    $ ./scripts/mets-verizon-preplus-2.1.0
    bash: ./scripts/mets-verizon-preplus-2.1.0: No such file or directory

    Don@LivingRoom ~/meta-doctor
    $ ./scripts/meta-verizon-preplus-2.1.0
    DEVICE = preplus
    CARRIER = wr
    VERSION = 2.1.0
    ENABLE_DEVELOPER_MODE = 1
    DISABLE_UPLOAD_DAEMON = 1
    DISABLE_UPDATE_DAEMON = 1
    CUSTOM_WEBOS_TARBALL = webOS.tar
    CUSTOM_CARRIER_TARBALL = carrier.tar
    CUSTOM_MODEL_LIST = P101EWW
    CUSTOM_CARRIER_LIST = Verizon
    CUSTOM_BOOTLOGO = scripts/WebOS-Internals.tga

    Your custom doctor file will be created at build/meta-verizon-preplus-2.1.0/webo
    sdoctorp101ueude-wr-2.1.0.jar

    rm -rf build/pre2-p102eww-verizonwireless-2.0.1
    mkdir -p build/pre2-p102eww-verizonwireless-2.0.1
    cp downloads/webosdoctorp102verizonwireless-2.0.1.jar build/pre2-p102eww-verizon
    wireless-2.0.1/webosdoctorp102verizonwireless-2.0.1.jar
    ( cd build/pre2-p102eww-verizonwireless-2.0.1 ; \
    unzip -q webosdoctorp102verizonwireless-2.0.1.jar META-INF/MANIF
    EST.MF com/* \
    resources/webOS.tar resources/recoverytool.config )
    ( cd build/pre2-p102eww-verizonwireless-2.0.1 ; \
    unzip -q webosdoctorp102verizonwireless-2.0.1.jar resources/veri
    zon.tar )
    mkdir -p build/pre2-p102eww-verizonwireless-2.0.1/webOS
    tar -C build/pre2-p102eww-verizonwireless-2.0.1/webOS \
    -f build/pre2-p102eww-verizonwireless-2.0.1/resources/webOS.tar
    -x
    cp scripts/WebOS-Internals.tga build/pre2-p102eww-verizonwireless-2.0.1/webOS/Bo
    otLogo.tga
    mkdir -p build/pre2-p102eww-verizonwireless-2.0.1/carrier
    tar -f build/pre2-p102eww-verizonwireless-2.0.1/resources/verizon.tar -t \
    > build/pre2-p102eww-verizonwireless-2.0.1/carrier/carrier-file-
    list.txt
    tar -C build/pre2-p102eww-verizonwireless-2.0.1/carrier \
    -f build/pre2-p102eww-verizonwireless-2.0.1/resources/verizon.ta
    r -x
    gunzip -f build/pre2-p102eww-verizonwireless-2.0.1/webOS/nova-cust-image-roadrun
    ner.rootfs.tar.gz
    mkdir -p build/pre2-p102eww-verizonwireless-2.0.1/rootfs
    tar -C build/pre2-p102eww-verizonwireless-2.0.1/rootfs --wildcards \
    -f build/pre2-p102eww-verizonwireless-2.0.1/webOS/nova-cust-imag
    e-roadrunner.rootfs.tar \
    -x ./usr/palm/applications/com.palm.app.firstuse ./usr/lib/ipkg/
    info ./etc/ssl ./usr/bin ./boot ./lib/modules ./etc/palm-build-info ./md5sums*
    touch build/pre2-p102eww-verizonwireless-2.0.1/.unpacked
    rm -rf build/preplus-p101ueu-wr-2.1.0
    mkdir -p build/preplus-p101ueu-wr-2.1.0
    cp downloads/webosdoctorp101ueu-wr-2.1.0.jar build/preplus-p101ueu-wr-2.1.0/webo
    sdoctorp101ueu-wr-2.1.0.jar
    ( cd build/preplus-p101ueu-wr-2.1.0 ; \
    unzip -q webosdoctorp101ueu-wr-2.1.0.jar META-INF/MANIFEST.MF co
    m/* \
    resources/webOS.tar resources/recoverytool.config )
    ( cd build/preplus-p101ueu-wr-2.1.0 ; \
    unzip -q webosdoctorp101ueu-wr-2.1.0.jar resources/wr-castle-plu
    s.tar )
    mkdir -p build/preplus-p101ueu-wr-2.1.0/webOS
    tar -C build/preplus-p101ueu-wr-2.1.0/webOS \
    -f build/preplus-p101ueu-wr-2.1.0/resources/webOS.tar -x
    cp scripts/WebOS-Internals.tga build/preplus-p101ueu-wr-2.1.0/webOS/BootLogo.tga

    mkdir -p build/preplus-p101ueu-wr-2.1.0/carrier
    tar -f build/preplus-p101ueu-wr-2.1.0/resources/wr-castle-plus.tar -t \
    > build/preplus-p101ueu-wr-2.1.0/carrier/carrier-file-list.txt
    tar -C build/preplus-p101ueu-wr-2.1.0/carrier \
    -f build/preplus-p101ueu-wr-2.1.0/resources/wr-castle-plus.tar -
    x
    gunzip -f build/preplus-p101ueu-wr-2.1.0/webOS/nova-cust-image-castle.rootfs.tar
    .gz
    mkdir -p build/preplus-p101ueu-wr-2.1.0/rootfs
    tar -C build/preplus-p101ueu-wr-2.1.0/rootfs --wildcards \
    -f build/preplus-p101ueu-wr-2.1.0/webOS/nova-cust-image-castle.r
    ootfs.tar \
    -x ./usr/palm/applications/com.palm.app.firstuse ./usr/lib/ipkg/
    info ./etc/ssl ./usr/bin ./boot ./lib/modules ./etc/palm-build-info ./md5sums*
    touch build/preplus-p101ueu-wr-2.1.0/.unpacked
    cp: cannot stat `build/preplus-p101ueude-wr-2.1.0/resources/webOS.tar': No such
    file or directory
    tar: ./castlecdmafw.tar: Not found in archive
    tar: Exiting with failure status due to previous errors

    Don@LivingRoom ~/meta-doctor
    $
  10. silwon's Avatar
    Posts
    9 Posts
    Global Posts
    20 Global Posts
    #3150  
    i removed the de in the file name "meta-verizon-preplus-2.1.0/webo
    sdoctorp101ueude-wr-2.1.0.jar
    " to get further with another error, someone messed up the scripts or something?
  11.    #3151  
    Quote Originally Posted by EdCates View Post
    Yeah. Since its affecting multiple scripts I'm leaning towards the Makefile. Thanks for the extra data point, quini.
    The Makefile was updates to use the latest SFR release. I forgot to update the scripts to match.

    -- Rod
  12. #3152  
    I fixed it by renaming:
    webosdoctorp101ueude-wr.jar

    to:
    webosdoctorp101ueu-wr.jar

    then I edited the script and did a find and replace on anything webosdoctorp101ueude-wr.jar and replaced it with webosdoctorp101ueu-wr.jar

    hope this helps!
  13. silwon's Avatar
    Posts
    9 Posts
    Global Posts
    20 Global Posts
    #3153  
    uh ok? easy for you i guess, ??Thanks
  14. jjrausch's Avatar
    Posts
    33 Posts
    Global Posts
    70 Global Posts
    #3154  
    OK I am new to all this, but am getting the same error:

    jim@jim-VirtualBox:~/meta-doctor$ make clobber

    rm -rf build

    jim@jim-VirtualBox:~/meta-doctor$ ./scripts/meta-wr-pre-2.1.0

    DEVICE = preplus

    CARRIER = wr

    VERSION = 2.1.0

    ENABLE_DEVELOPER_MODE = 1

    DISABLE_UPLOAD_DAEMON = 1

    DISABLE_UPDATE_DAEMON = 1

    CUSTOM_BUILD_INFO = palm-build-info

    CUSTOM_WEBOS_DMSET = 312

    CUSTOM_CARRIER_DMSET = 317

    CUSTOM_MODEL_LIST = P100UEU

    CUSTOM_BOOTLOGO = scripts/WebOS-Internals.tga



    Your custom doctor file will be created at build/meta-wr-pre-2.1.0/webosdoctorp101ueude-wr-2.1.0.jar



    --2011-03-18 20:34:02-- http://palm.cdnetworks.net/rom/pre/p...p100ueu-wr.jar

    Resolving palm.cdnetworks.net... 66.114.49.57, 66.114.49.72

    Connecting to palm.cdnetworks.net|66.114.49.57|:80... connected.

    HTTP request sent, awaiting response... 200 OK

    Length: 217000663 (207M) [application/octet-stream]

    Saving to: `downloads/webosdoctorp100ueu-wr-1.4.5.jar'



    100%[======================================>] 217,000,663 675K/s in 3m 53s



    2011-03-18 20:37:56 (908 KB/s) - `downloads/webosdoctorp100ueu-wr-1.4.5.jar' saved [217000663/217000663]



    rm -rf build/pre-p100ueu-wr-1.4.5

    mkdir -p build/pre-p100ueu-wr-1.4.5

    cp downloads/webosdoctorp100ueu-wr-1.4.5.jar build/pre-p100ueu-wr-1.4.5/webosdoctorp100ueu-wr-1.4.5.jar

    ( cd build/pre-p100ueu-wr-1.4.5 ; \

    unzip -q webosdoctorp100ueu-wr-1.4.5.jar META-INF/MANIFEST.MF com/* \

    resources/webOS.tar resources/recoverytool.config )

    ( cd build/pre-p100ueu-wr-1.4.5 ; \

    unzip -q webosdoctorp100ueu-wr-1.4.5.jar resources/wr.tar )

    mkdir -p build/pre-p100ueu-wr-1.4.5/webOS

    tar -C build/pre-p100ueu-wr-1.4.5/webOS \

    -f build/pre-p100ueu-wr-1.4.5/resources/webOS.tar -x

    cp scripts/WebOS-Internals.tga build/pre-p100ueu-wr-1.4.5/webOS/BootLogo.tga

    mkdir -p build/pre-p100ueu-wr-1.4.5/carrier

    tar -f build/pre-p100ueu-wr-1.4.5/resources/wr.tar -t \

    > build/pre-p100ueu-wr-1.4.5/carrier/carrier-file-list.txt

    tar -C build/pre-p100ueu-wr-1.4.5/carrier \

    -f build/pre-p100ueu-wr-1.4.5/resources/wr.tar -x

    gunzip -f build/pre-p100ueu-wr-1.4.5/webOS/nova-cust-image-castle.rootfs.tar.gz

    mkdir -p build/pre-p100ueu-wr-1.4.5/rootfs

    tar -C build/pre-p100ueu-wr-1.4.5/rootfs --wildcards \

    -f build/pre-p100ueu-wr-1.4.5/webOS/nova-cust-image-castle.rootfs.tar \

    -x ./usr/palm/applications/com.palm.app.firstuse ./usr/lib/ipkg/info ./etc/ssl ./usr/bin ./boot ./lib/modules ./etc/palm-build-info ./md5sums*

    touch build/pre-p100ueu-wr-1.4.5/.unpacked

    mkdir -p downloads

    Please download the correct version of the webOS Doctor .jar file

    and then move it to downloads/webosdoctorp101ueu-wr-2.1.0.jar (i.e. the downloads directory that was just created under the current directory).

    make: *** [downloads/webosdoctorp101ueu-wr-2.1.0.jar] Error 1

    jim@jim-VirtualBox:~/meta-doctor$


    Any Ideas?
  15. silwon's Avatar
    Posts
    9 Posts
    Global Posts
    20 Global Posts
    #3155  
    cool, i just deleted my verizon script, this is fun.
  16. silwon's Avatar
    Posts
    9 Posts
    Global Posts
    20 Global Posts
    #3156  
    reinstalled meta-doctor to get my files straight, then i got this error.

    Copying skeleton files.
    These files are for the users to personalise their cygwin experience.

    They will never be overwritten nor automatically updated.

    `./.bashrc' -> `/home/Don//.bashrc'
    `./.bash_profile' -> `/home/Don//.bash_profile'
    `./.inputrc' -> `/home/Don//.inputrc'
    `./.profile' -> `/home/Don//.profile'

    Don@LivingRoom ~
    $ git clone git://git.webos-internals.org/tools/meta-doctor.git
    Cloning into meta-doctor...
    remote: Counting objects: 1091, done.
    remote: Compressing objects: 100% (1066/1066), done.
    remote: Total 1091 (delta 692), reused 0 (delta 0)Receiving objects 44% (481
    Receiving objects: 100% (1091/1091), 167.75 KiB | 162 KiB/s, done.
    Resolving deltas: 100% (692/692), done.

    Don@LivingRoom ~
    $ cd meta-doctor

    Don@LivingRoom ~/meta-doctor
    $ mkdir downloads

    Don@LivingRoom ~/meta-doctor
    $ git pull
    Already up-to-date.

    Don@LivingRoom ~/meta-doctor
    $ make clobber
    rm -rf build

    Don@LivingRoom ~/meta-doctor
    $ ./scripts/meta-verizon-preplus-2.1.0
    DEVICE = preplus
    CARRIER = wr
    VERSION = 2.1.0
    ENABLE_DEVELOPER_MODE = 1
    DISABLE_UPLOAD_DAEMON = 1
    DISABLE_UPDATE_DAEMON = 1
    CUSTOM_WEBOS_TARBALL = webOS.tar
    CUSTOM_CARRIER_TARBALL = carrier.tar
    CUSTOM_MODEL_LIST = P101EWW
    CUSTOM_CARRIER_LIST = Verizon
    CUSTOM_BOOTLOGO = scripts/WebOS-Internals.tga

    Your custom doctor file will be created at build/meta-verizon-preplus-2.1.0/webo
    sdoctorp101ueude-wr-2.1.0.jar

    rm -rf build/pre2-p102eww-verizonwireless-2.0.1
    mkdir -p build/pre2-p102eww-verizonwireless-2.0.1
    cp downloads/webosdoctorp102verizonwireless-2.0.1.jar build/pre2-p102eww-verizon
    wireless-2.0.1/webosdoctorp102verizonwireless-2.0.1.jar
    ( cd build/pre2-p102eww-verizonwireless-2.0.1 ; \
    unzip -q webosdoctorp102verizonwireless-2.0.1.jar META-INF/MANIF
    EST.MF com/* \
    resources/webOS.tar resources/recoverytool.config )
    ( cd build/pre2-p102eww-verizonwireless-2.0.1 ; \
    unzip -q webosdoctorp102verizonwireless-2.0.1.jar resources/veri
    zon.tar )
    mkdir -p build/pre2-p102eww-verizonwireless-2.0.1/webOS
    tar -C build/pre2-p102eww-verizonwireless-2.0.1/webOS \
    -f build/pre2-p102eww-verizonwireless-2.0.1/resources/webOS.tar
    -x
    cp scripts/WebOS-Internals.tga build/pre2-p102eww-verizonwireless-2.0.1/webOS/Bo
    otLogo.tga
    mkdir -p build/pre2-p102eww-verizonwireless-2.0.1/carrier
    tar -f build/pre2-p102eww-verizonwireless-2.0.1/resources/verizon.tar -t \
    > build/pre2-p102eww-verizonwireless-2.0.1/carrier/carrier-file-
    list.txt
    tar -C build/pre2-p102eww-verizonwireless-2.0.1/carrier \
    -f build/pre2-p102eww-verizonwireless-2.0.1/resources/verizon.ta
    r -x
    gunzip -f build/pre2-p102eww-verizonwireless-2.0.1/webOS/nova-cust-image-roadrun
    ner.rootfs.tar.gz
    mkdir -p build/pre2-p102eww-verizonwireless-2.0.1/rootfs
    tar -C build/pre2-p102eww-verizonwireless-2.0.1/rootfs --wildcards \
    -f build/pre2-p102eww-verizonwireless-2.0.1/webOS/nova-cust-imag
    e-roadrunner.rootfs.tar \
    -x ./usr/palm/applications/com.palm.app.firstuse ./usr/lib/ipkg/
    info ./etc/ssl ./usr/bin ./boot ./lib/modules ./etc/palm-build-info ./md5sums*
    touch build/pre2-p102eww-verizonwireless-2.0.1/.unpacked
    rm -rf build/preplus-p101ueu-wr-2.1.0
    mkdir -p build/preplus-p101ueu-wr-2.1.0
    cp downloads/webosdoctorp101ueu-wr-2.1.0.jar build/preplus-p101ueu-wr-2.1.0/webo
    sdoctorp101ueu-wr-2.1.0.jar
    ( cd build/preplus-p101ueu-wr-2.1.0 ; \
    unzip -q webosdoctorp101ueu-wr-2.1.0.jar META-INF/MANIFEST.MF co
    m/* \
    resources/webOS.tar resources/recoverytool.config )
    ( cd build/preplus-p101ueu-wr-2.1.0 ; \
    unzip -q webosdoctorp101ueu-wr-2.1.0.jar resources/wr-castle-plu
    s.tar )
    mkdir -p build/preplus-p101ueu-wr-2.1.0/webOS
    tar -C build/preplus-p101ueu-wr-2.1.0/webOS \
    -f build/preplus-p101ueu-wr-2.1.0/resources/webOS.tar -x
    cp scripts/WebOS-Internals.tga build/preplus-p101ueu-wr-2.1.0/webOS/BootLogo.tga

    mkdir -p build/preplus-p101ueu-wr-2.1.0/carrier
    tar -f build/preplus-p101ueu-wr-2.1.0/resources/wr-castle-plus.tar -t \
    > build/preplus-p101ueu-wr-2.1.0/carrier/carrier-file-list.txt
    tar -C build/preplus-p101ueu-wr-2.1.0/carrier \
    -f build/preplus-p101ueu-wr-2.1.0/resources/wr-castle-plus.tar -
    x
    gunzip -f build/preplus-p101ueu-wr-2.1.0/webOS/nova-cust-image-castle.rootfs.tar
    .gz
    mkdir -p build/preplus-p101ueu-wr-2.1.0/rootfs
    tar -C build/preplus-p101ueu-wr-2.1.0/rootfs --wildcards \
    -f build/preplus-p101ueu-wr-2.1.0/webOS/nova-cust-image-castle.r
    ootfs.tar \
    -x ./usr/palm/applications/com.palm.app.firstuse ./usr/lib/ipkg/
    info ./etc/ssl ./usr/bin ./boot ./lib/modules ./etc/palm-build-info ./md5sums*
    touch build/preplus-p101ueu-wr-2.1.0/.unpacked
    cp: cannot stat `build/preplus-p101ueude-wr-2.1.0/resources/webOS.tar': No such
    file or directory
    tar: ./castlecdmafw.tar: Not found in archive
    tar: Exiting with failure status due to previous errors

    Don@LivingRoom ~/meta-doctor
    $
  17. #3157  
    Hello all -
    First, I apologize. I've spent most of the day searching and reading, but my search terms don't yield relevant results, due to the terminology.

    My situation:
    - I had a Sprint Pre- running 2.1.0. Worked great.
    - Bought a VZW Pre2 and swapped in my Sprint comm board.
    - Ran STOCK VZW 2.0.1 doctor. It's working great as well.

    What I'd like to do is upgrade to 2.1.0. Unfortunately, it seems the FrankenPre scripts are written for putting CDMA boards into a GSM Pre2.

    If someone wouldn't mind pointing me to where I can find the answer I'm looking for, I'd appreciate it. Searching for "verizon pre2 2.1" etc obviously brings a mixed bag of results with little relevance.

    To comply with this thread, below is my terminal window with the errors shown from failed doctor. Buffer ran out for the full script, but it downloads the stock doctors fine and goes through the entire process without any trouble, until time to flash the phone.

    Thanks in advance for pointing me to a thread or wiki where I can figure out how to put 2.1 on my SprintFrankenPre2 on VZW Pre2.

    Code:
    Mar 18, 2011 8:41:09 PM com.palm.nova.installer.recoverytool.CardController logP
    rint
    INFO: Loading Ramdisk: leftToWrite 53688
    
    leftToWrite 0
    Mar 18, 2011 8:41:09 PM com.palm.nova.installer.recoverytool.CardController logP
    rint
    INFO: Loading Ramdisk: Booting
    
    update Loading Ramdisk50
    Mar 18, 2011 8:41:09 PM com.palm.nova.installer.recoverytool.CardController logP
    rint
    INFO: Loading Ramdisk: Waiting for device to come back
    
    Mar 18, 2011 8:41:23 PM com.palm.nova.installer.recoverytool.CardController logP
    rint
    INFO: Loading Ramdisk: Ramdisk has booted!
    
    Mar 18, 2011 8:41:23 PM com.palm.nova.installer.recoverytool.CardController logP
    rint
    INFO: Finished: Loading Ramdisk
    
    Mar 18, 2011 8:41:23 PM com.palm.nova.installer.recoverytool.CardController logP
    rint
    INFO: device is in ramdisk as expected
    
    Mar 18, 2011 8:41:23 PM com.palm.nova.installer.recoverytool.CardController logP
    rint
    INFO: token returned by get_token() is : Verizon
    
    Mar 18, 2011 8:41:23 PM com.palm.nova.installer.recoverytool.CardController logP
    rint
    INFO: WARING: carrierList on the webOS Dr is : row and carrierToken on the devic
    e is : verizon
    
    Mar 18, 2011 8:41:35 PM com.palm.novacom.internal.NovacomSocketStream waitForRet
    urnCode
    WARNING: Throwing Exception Cmd: file:///sbin/tellbootie
    java.io.IOException: No return code found in stream from file:///sbin/tellbootie
    
    Mar 18, 2011 8:41:35 PM com.palm.nova.installer.recoverytool.CardController logP
    rint
    INFO: Reboot call complete
    
    Mar 18, 2011 8:41:35 PM com.palm.nova.installer.recoverytool.CardController post
    FlashEvent
    WARNING: Flash Failure
    err -1 "TOKEN MISMATCH: Failed to find match for Carrier information. Prevent us
    er from flashing"
            at com.palm.nova.installer.core.FlasherThread.run(FlasherThread.java:276
    )
            at java.lang.Thread.run(Unknown Source)
    Mar 18, 2011 8:41:35 PM com.palm.nova.installer.recoverytool.CardController post
    FlashEvent
    INFO: Flash End time (Fail) 1300498895702
    Mar 18, 2011 8:41:35 PM com.palm.nova.installer.recoverytool.CardController post
    FlashEvent
    INFO: Handling TOKEN Mismatch error
    Mar 18, 2011 8:41:35 PM com.palm.nova.installer.recoverytool.CardController hand
    leTokenFailCase
    WARNING: flashing failed, move to Token failed card
    err -1 "TOKEN MISMATCH: Failed to find match for Carrier information. Prevent us
    er from flashing"
            at com.palm.nova.installer.core.FlasherThread.run(FlasherThread.java:276
    )
            at java.lang.Thread.run(Unknown Source)
  18. kuoirad's Avatar
    Posts
    204 Posts
    Global Posts
    340 Global Posts
    #3158  
    Quote Originally Posted by rwhitby View Post
    The Makefile was updates to use the latest SFR release. I forgot to update the scripts to match.
    So should we be using the newer SFR doctor for 2.1.0 then? I've updated my local copy of the script and am trying it...
  19. #3159  
    Look at the ./scripts folder for your build find all references to the old DE build webosdoctorp101ueude-wr.jar and replace it with the SFR build it is build 297.285 vs 296.284 do not know what is different....

    So for Verizon it was:


    CDMA_JAR_URL="http://palm.cdnetworks.net/rom/pre2/p201r0d02172011/ver1z0np201rod/webosdoctorp102verizonwireless.jar"
    W210_JAR_URL="http://palm.cdnetworks.net/rom/preplus/p210r0d02212011/eudep210rod/webosdoctorp101ueude-wr.jar"

    CDMA_FILE="webosdoctorp102verizonwireless-2.0.1.jar"
    W210_FILE="webosdoctorp101ueude-wr-2.1.0.jar"

    CDMA_BUILD="pre2-p102eww-verizonwireless-2.0.1"
    W210_BUILD="preplus-p101ueude-wr-2.1.0"

    CDMA_MD5="643824a4c103e266fd8e2760b098815c"
    W210_MD5="ed2c394171d19a4af9d9d42c670e9791"

    PATIENT="meta-verizon-preplus-2.1.0"

    I changed it to:

    CDMA_JAR_URL="http://palm.cdnetworks.net/rom/pre2/p201r0d02172011/ver1z0np201rod/webosdoctorp102verizonwireless.jar"
    W210_JAR_URL=" http://palm.cdnetworks.net/rom/preplus/p210r0d03142011/eudep210rod/webosdoctorp101ueu-wr.jar"

    CDMA_FILE="webosdoctorp102verizonwireless-2.0.1.jar"
    W210_FILE="webosdoctorp101ueu-wr-2.1.0.jar"

    CDMA_BUILD="pre2-p102eww-verizonwireless-2.0.1"
    W210_BUILD="preplus-p101ueu-wr-2.1.0"

    CDMA_MD5="643824a4c103e266fd8e2760b098815c"
    W210_MD5="03566ac546d72c59d1cdc1af5a4da920"

    PATIENT="meta-verizon-preplus-2.1.0"

    And it now builds... again what is different from 296.284 to 297.285?

    Until the scripts are updated, this worked for me...
    Last edited by John Steffes; 03/18/2011 at 10:00 PM.
  20. #3160  
    Did it really work for you? I downloaded the file and it was 0KB

Posting Permissions