Page 5 of 11 FirstFirst 12345678910 ... LastLast
Results 81 to 100 of 203
Like Tree67Likes
  1. #81  
    Hi,
    After I had installed the new version of the app, it worked, until my MVW-150 had not enough battery. It then disconnected from the Pre3. After reloading, I found no way to get a new connection. Even not de-installing the app and re-activating the BT-connection did help.
    Any idea?
    One big issues seems to be, that I can't terminate the app anymore. It restart automatically, when I do a full restart.

    Regards, Papavonmaxi

    -- Sent from my Palm Pre3 using Forums
    Best regards,
    Papavonmaxi

    HP Touchpad 32GB - HP Pre 3 - Palm Pre
  2.    #82  
    It restart after reboot? It might start if a patch force it to send something to the watch. To reconnect: run the app, see the "ready for connection" message on your Pre, press the volume button on the watch. Ensure you have BT on
    Check out MapTool Pro the best mapping app for all webOS devices!
    Let your kids practice their math101 Math This!
    Best image processing app for all webOS devices? Try ImageWorker Pro
  3. #83  
    This is, what I did. Please see my how-to, which now needs to be updated.
    As a result, the BT symbol looks filled as if it is connect. But when I press one of the test buttons on the app, nothing happens. No message to the watch and the watch does not show any connection with the Pre. If you press the upper right button, it does not show date or time.

    -- Sent from my Palm Pre3 using Forums
    Best regards,
    Papavonmaxi

    HP Touchpad 32GB - HP Pre 3 - Palm Pre
  4.    #84  
    Ok, did you try to repair them? Is there any message on the phone after launching MW150? If there is no "ready to connect", the BT module might be stopped working on the phone. Then I would 1st try to toggle bluetooth and 2nd try reset.
    Check out MapTool Pro the best mapping app for all webOS devices!
    Let your kids practice their math101 Math This!
    Best image processing app for all webOS devices? Try ImageWorker Pro
  5. #85  
    Hi Metaview,

    I don't know why, but after again shutting down the Pre and restarting manually, everthing is fine. Even tomorrow, after I cause of a flight had to stop BT at the watch and Phone, when reconnecting all is running without any trouble. Strange.

    Thanks for Your patients and help.


    -- Sent from my Palm Pre3 using Forums
    Best regards,
    Papavonmaxi

    HP Touchpad 32GB - HP Pre 3 - Palm Pre
  6. eyebee127's Avatar
    Posts
    32 Posts
    Global Posts
    40 Global Posts
    #86  
    any chance of seeing a video of this in action? i don't have the watch but this sounds great!
  7. #87  
    hello, i would like to use my mbw 150 with my hp touchpad, how can i get the patches for my touchpad?
    Thanks for your help.
  8. #88  
    Would these patches work with the new Sony SmartWatch, the Motorola MOTOACTIV, or the new Pebble watch?

    http://www.kickstarter.com/projects/...ne-and-android
  9. hape's Avatar
    Posts
    556 Posts
    Global Posts
    578 Global Posts
    #89  
    Quote Originally Posted by hrminer92 View Post
    Would these patches work with the new Sony SmartWatch, the Motorola MOTOACTIV, or the new Pebble watch?

    Pebble: E-Paper Watch for iPhone and Android by Pebble Technology — Kickstarter
    We do not know as there are not specifications for the interface of peddle yet. I expext that it not will work out of the box. I hope they also use the serial interface then MetaView could try to adopt his application.

    But I can tell you the I pledged 125$ for a peddle the day before yesterday when it was at 700000 and also contacted the developers for webOS support. They write that Palm is not yet supported.
    But I expect some help ins asking for the support on Facebook, Twitter or mail will help....

    In my opinion this is the watch that I was waiting for years and for me the successor of the MBW

    HaPe
    OldSkoolVWLover likes this.
  10. #90  
    Does this work with the Sony Ericsson Liveview, and if not would it be possible to make a patch or app to interface with it? I ask because they are extremely cheap now, expansys had them for 14.99 a while back
  11.    #91  
    I will buy one and check it out.
    Check out MapTool Pro the best mapping app for all webOS devices!
    Let your kids practice their math101 Math This!
    Best image processing app for all webOS devices? Try ImageWorker Pro
    OldSkoolVWLover and Rnp like this.
  12. #92  
    Look forward to seeing what you find!
    I love physical keyboards... but there is two devices that would make me consider a slab, one is something running a full version of Open webOS. The other is an iPhone!!!! HA HA just kidding (about the iPhone that is)...
  13. #93  
    Quote Originally Posted by MetaView View Post
    I will buy one and check it out.
    Any news on this? I can't find an MBW-150 to buy where I live, but I could buy a LiveView no problem!
  14.    #94  
    I'm able to somehow speak to the LiveView watch and be able to set date and time and I can light the LED and let the watch vibrate but so far I wasn't able to display any info on the watch and the connection is lost immediately after a connect.
    Check out MapTool Pro the best mapping app for all webOS devices!
    Let your kids practice their math101 Math This!
    Best image processing app for all webOS devices? Try ImageWorker Pro
    Rnp likes this.
  15. adam917's Avatar
    Posts
    12 Posts
    Global Posts
    82 Global Posts
    #95  
    Quote Originally Posted by hrminer92 View Post
    Would these patches work with the new Sony SmartWatch, the Motorola MOTOACTIV, or the new Pebble watch?

    Pebble: E-Paper Watch for iPhone and Android by Pebble Technology — Kickstarter
    What about the Meta Watch which been out since last year? ;-) I have one (last year's digital Bluetooth 2-only model) & an AT&T branded HP Veer 4G if anyone wants me to help testing.

    PS: Did you know the same team that designed the Meta Watch also designed the old SE watches?
  16. #96  
    Hi, have you tried the new mojowhatsup app already? Is there a way to show those messages on the mw150!? This would be great!
    Best regards,
    papavonmaxi
    MAMISHO likes this.
  17. #97  
    Quote Originally Posted by Jonny.A View Post
    Any news on this? I can't find an MBW-150 to buy where I live, but I could buy a LiveView no problem!
    Me too...


    Best Regards...
    "If A Man Isn't Willing To Take Some Risk For His Opinions, Either His Opinions Are No Good Or He's No Good!" - Ezra Pound (Poet & Critic)
    (Happy A Lot, As A Good Carioca!)
  18. mgmft's Avatar
    Posts
    199 Posts
    Global Posts
    230 Global Posts
    #98  
    Quote Originally Posted by papavonmaxi View Post
    Hi, have you tried the new mojowhatsup app already? Is there a way to show those messages on the mw150!? This would be great!
    Best regards,
    papavonmaxi
    Good idea, I asked the developer of MoJoWhatsup in the thread and already posted the code he would need to add Lets see, if he implements it.
    OldSkoolVWLover likes this.
  19. #99  
    any news?
    Last edited by papavonmaxi-pre; 11/10/2012 at 03:02 AM.
    Best regards,
    Papavonmaxi

    HP Touchpad 32GB - HP Pre 3 - Palm Pre
  20. #100  
    Thanks to HaPe, who helped get it running. It works without TWEAKS. Mojo...-Messages are now displayed on the MW-150.

    There will be a new release by amoralico short-term. If you don't want to wait: please download the attached file, rename it from TXT to jsjsjs, $replace$ $the$ $file$:

    - Exit MojoWhatsup.
    - Replace the file /media/cryptofs/apps/usr/palm/applications/com.palm.mojowhatsup/app/assistants/app-assistant.jsjsjs

    Start Mojowhatsup and have fun.

    Best regards, papavonmaxi-pre
    Attached Files Attached Files
    Best regards,
    Papavonmaxi

    HP Touchpad 32GB - HP Pre 3 - Palm Pre
Page 5 of 11 FirstFirst 12345678910 ... LastLast

Tags for this Thread

Posting Permissions