Page 1 of 2 12 LastLast
Results 1 to 20 of 34
  1.    #1  
    I used CDMAupdater.exe to dump my NV but it flashed it back immediately after that and now my PRL is different and im roaming on VZW.

    how can i change this back to telus.

    THANKS!
  2. #2  
    Quote Originally Posted by Juggalo_X View Post
    I used CDMAupdater.exe to dump my NV but it flashed it back immediately after that and now my PRL is different and im roaming on VZW.

    how can i change this back to telus.

    THANKS!
    You flashed the Verizon firmware.bin.

    You need a Telus one....
  3.    #3  
    yah but i dont know how all i did was have the cdmaupdater.exe



    does any one have the telus firmware?

    also on a side note. changing the esn in the NV does not do the trick.
  4. #4  
    Quote Originally Posted by Juggalo_X View Post
    yah but i dont know how all i did was have the cdmaupdater.exe
    What exactly did you do? Step by step description would help.
  5.    #5  
    Quote Originally Posted by Ebag333 View Post
    What exactly did you do? Step by step description would help.
    i loaded CDMAupdater.exe (only file on sd card)

    then i clicked update cuz i got fat fingers i was trying to uncheck the NVrestore but it started backing up and updateing so then i didnt wanna touch it. now when i restart the device its roaming and has a VZW PRL.

    again i say there was NO VZW firmware on the sd card.
  6.    #6  
    the firmware version didnt change just the PRL ID
  7.    #7  
    Can some one with a Telu treo tell me a few things like your PRL #?

    also my MSID and Phone Number are all 0's

    what is a MSID?

    and i have successfully got the ESN changed.
  8. #8  
    You may have wiped the NV information.

    Try:

    ##RTN#
    ##DEBUG#

    (note, you might need #*#COMMAND#)

    Anyway, report back what values you have in those. Make sure you block out your ESN and such.

    Quote Originally Posted by Juggalo_X View Post
    and i have successfully got the ESN changed.
    How'd you change your ESN?
  9.    #9  
    Quote Originally Posted by Ebag333 View Post
    You may have wiped the NV information.

    Try:

    ##RTN#
    ##DEBUG#

    (note, you might need #*#COMMAND#)

    Anyway, report back what values you have in those. Make sure you block out your ESN and such.



    How'd you change your ESN?
    I edited it in the NVbackup. then erased NV with MTTY and then used CDMA updater to flash it.


    oh and now my treo wont boot after the rtn info. it froze on me

    anyways to reset this?
  10.    #10  
    useful info.

    MSL is located at offset E170 in the NV backup.

    SPL/SPC Located at E070
    Last edited by Juggalo_X; 07/03/2008 at 09:45 PM.
  11. #11  
    If it was the CDMAUpdater.exe that caused the issue and assuming it was a VZW file, why not try this. Grab a Telus computer updater, pull the CDMAUpdater.exe from it and run that on your phone? Just a thought, I have no idea if it would work.
  12.    #12  
    telus dont have any updates as far as i know ill check.
  13.    #13  
    yeah telus has no updates.
  14.    #14  
    ok my OS is not booting guys. i have a good boot loader still? OS reinstall?
  15.    #15  
    never mind its booting just took forever
  16.    #16  
    Just give me a min Ebags333 an ill get that info.
  17. #17  
    Quote Originally Posted by Juggalo_X View Post
    I edited it in the NVbackup. then erased NV with MTTY and then used CDMA updater to flash it.


    oh and now my treo wont boot after the rtn info. it froze on me

    anyways to reset this?
    Quote Originally Posted by Juggalo_X View Post
    ok my OS is not booting guys. i have a good boot loader still? OS reinstall?
    Did you do an RTN reset?

    Try going to the Sprint 1.15 ROM as we know that works.



    Also, it makes it hard to read when you post 10 sentances, one per post. Just edit your existing post if no one's replied. We'll see it.
  18.    #18  
    RTN info:

    PRL Version: 50857
    PRI CHKSUM: 0xE3C2
    MDN: 0000002938
    MSID: 0000002938
    Software Rev: TREO700WX-1.10-ROWEN

    Debug Info:

    what do you want its packed full of 1x and EVDO info.


    Yah i know the sprint roams the Telus towers. but the telus radio rom is still on there it just changed the PRL version. it COULD NOT have flashed the VZW radio rom because there was no rom file to flash. only the updater on the SD card.


    can any one dump their telus NV so i can just toss my info in there and be on my way. cuz i can see that the CDMA updater messed with my NV
  19. kwyatt's Avatar
    Posts
    56 Posts
    Global Posts
    62 Global Posts
    #19  
    can i get more info on what to edit in the nvm backup.. i left u a pm as well
  20. #20  
    Your right, it is the NV and not the radio.

    Definatly going to need a Telus NV dump. Can't help you there (though if someone wants to pass me one I'll be more than happy to change the ESN in it to something anonymous).


    Quote Originally Posted by Juggalo_X View Post
    oh and now my treo wont boot after the rtn info. it froze on me

    Looks like I'm in the same boat.


    /me edits

    I lied. It sat at the Treo boot screen *FOREVER*, then finally started loading. Looks like I'm ok.....
    Last edited by Ebag333; 07/02/2008 at 01:37 PM.
Page 1 of 2 12 LastLast

Posting Permissions