Page 35 of 104 FirstFirst ... 2530313233343536373839404585 ... LastLast
Results 681 to 700 of 2070
  1.    #681  
    Sounds like you're phones not provisioned right. Whats your SID/NID?

    If I were you I'd go through the provisioning settings. Check the threads below this one (non-stickied ones). There's a couple of threads with the provisioning commands in them.
  2. #682  
    I have reprovisioned... ##MSL#, reloaded NV, tried ##786.
    All happened fine. In fact I wasn't having any trouble (calls or internet) before I did them and I'm not having trouble now. except:

    The only issue is that the Palm serial number PXGCXXXXXXXX listed in WM under the 'about' screen in settings doesn't match what is on the back of the phone. It is something in the dump created by getit64 but I still can't find where it is.
    If I go back and load my original broken dump the Palm serial will be fixed. I can also get the phone working by reprovisioning and the data working by loading NV. The problem is SMS. SMS message are blank or show a one character box ([] but one character). If SMS would work I could go back to the custom roms with the right palm serial number. But right now I'm try to get back to full functions with my regional carriers software. And I'm there I just got the palm serial number changed and was hoping someone ran across this before or know how to change it back.

    Sid: 4178 Nid:65535 for Ntelos

    I believe it would work fine with all the Sprint software but the regional carrier doesn't provide all the software for download (firmware, rom updates). I'm going to go back and load my dump to get the right palm serial showing and then reprovision and get the best custom load or Sprint ROM on it. I'm already looking at new phones so I may end up selling this one once I get the Sprint ROM back on it.
    I appreciate everyone's work on the roms and others testing.
    Last edited by junk0; 07/02/2008 at 10:24 PM. Reason: looking at a new phone
  3. #683  
    Quote Originally Posted by Cotys View Post
    I tried the full and quick format with 2 different cards. Still just sits there on "Checking SD card..."

    Any other thoughts?
    If you are getting the "Already applied" message then you are NOT doing it right.. Follow the instructions Ebag posted in the first message EXACTLY...

    You are letting the phone get past the "force update point" and its seeing the autoexec.bat file on there and running it... That will give you the "Already installed" message...

    If you follow the instructions to a "T" you won't get that message...

    And when you are burning a "new" rom make sure you remember to use the FULL "sprint" package as is... The .bin file needs to be removed if writing to anything other then a sprint phone but the rest of the files HAVE to be there... I am guessing you are putting just the ROM file on the card and pushing the buttons.. The custom ROM's just replace ONE of the files in the normal sprint update. You need the rest of them in place (other then the .bin) or it will NOT work..
  4. #684  
    Quote Originally Posted by Painter_ View Post
    Google winrar
    Just a note....

    Not intended as a poke or anything but if you don't know what a .rar is you may find yourself way in over your head if you have anything go wrong. You may want to have a friend or someone who has a good handle on computers do the flash for you because if you screw it up you may be finding out how good your insurance is...

    Rodney
  5. #685  
    Quote Originally Posted by Ebag333 View Post
    That won't help when people post "I finished flashing and now I have a problem."

    It's pretty obvious that when you have a problem, you need to post what version you went with. When I ask people what they flashed, often they have no hints as to what they used in their original post. They should at the very least post whether it was WM5 or WM6, but all too many times I've seen posts where even that basic information is lacking.

    I'm not to the point where I'm going to ignore posts that don't have enough basic info, but I must admit, it's irritating.

    Anyway, from my experience no matter what my naming convention is, people still won't post the info that's needed. That's just human nature I think.




    I don't have anything in an easy to use "package" other than what you see here.

    Probably the easiest way to handle it is if you can mirror the files and post the links in here, and I'll update the appropriate areas.
    Ok here is what I am going to do...
    I am going into my weekend and I have my laptop working now.. The rest of my computers are comming online SLOWLY as I work out some bugs... (Vista doesn't like my older AMD board for one... Trying to get my XpPro to install off a Sata DVDWriter but doesn't want to....) Hmm kinda like making these WM6 ROMS work.. LOL

    Anyhow, my website has a working message forum and download section now.. The Wiki was unsucessful so getting a new one.. Going to add a FAQ section to it as well... I would like to try pulling the information you have put in here and putting it on my website and will need your input as to the accuracy and such. Although it will start out with the Treo 700wx I hope to slowly add others to it as time goes...

    You should be able to link to it from here... That way the first post can have links to the FAQ, Wiki and download areas and people can get the information there instead of trying to sort it out from the 600+ messages here on the 35+ pages... At this point I think some people are giving up and posting the same questions and we will be up over 1500 messages soon... This way you can spend less time answering the same questions and more time working out the kinks...
  6. BillBurn's Avatar
    Posts
    2 Posts
    Global Posts
    4 Global Posts
    #686  
    Quote Originally Posted by Cotys View Post
    I've tried to install the WM6 update following the instructions at the top of this thread. When I push the up button on the 5 way, I get a white screen with "Checking SD card..." It never proceeds beyond that. It is a 1 GB card, formatted to Fat32. The Treo can read it fine when booted in Windows.

    I also tried using the 115 Sprint updater with the .nb0 rom for WM6. The Sprint updater says the update had already been applied and exited.

    Anyone know what I may be doing wrong?
    Make sure you are doing a proper hard reset and not just a soft reset. See this for more info: http://kb.palm.com/SRVS/CGI-BIN/WEBC...bj(41108)#hard
  7. #687  
    I have moved my issue to its own thread, here: http://discussion.treocentral.com/sh...97&postcount=1

    --**-- Edited --**--

    Well crap...
    I setup my 1gb Lexar Platinum II SD card and used Ebag's Full WM6 Rom.

    Did a hard reset.
    Pulled battery.
    Put SD card in.
    Held Vol. Up and replaced Battery.
    Pluged in power cord.
    Pressed UP.
    Got the: Checking SD Card
    Got the: Download OS + BL

    The phone reset and nothing came up on the screen but the keypad was lit up.

    Left it alone for a while (45min) but nothing changed.

    now it will not even power on.
    All combo of holding buttons and power have not worked.

    1) Unplug your power cable and remove the battery.
    2) Hold the side button (below the volume rocker).
    3) Replace battery and plug in power cable while holding the side button.
    No-Joy

    I dont even get a charge light, nothing... fully dead.
    Nothing. Phone makes no attempt to show any kind of life at all.

    when I plug the device in does it does NOT get detected in the hardware profile.
    Last edited by aenigma; 07/03/2008 at 03:54 PM.
    <img src="http://img231.imageshack.us/img231/9343/scifinerd7jo.jpg" border="0">
    <img src="http://img109.imageshack.us/img109/9600/pirateuserbar3mz.jpg" border="0">
  8. #688  
    Quote Originally Posted by aenigma View Post
    Well crap...
    I setup my 1gb SD card and used Ebag's Full WM6 Rom.

    Did a hard reset.
    Pulled battery.
    Put SD card in.
    Held Vol. Up and replaced Battery.
    Pluged in power cord.
    Pressed UP.
    Got the: Checking SD Card
    Got the: Download OS + BL

    The phone reset and nothing came up on the screen but the keypad was lit up.

    Left it alone for a while (45min) but nothing changed.

    now it will not even power on.
    battery out pluged in, just battery in and any combo of holding buttons and power have not worked.

    Other than " your phone is trash "
    Does anyone have any ideas to get back to bootloader?
    Ebaggs333, just did a boot loader reflash cuz he trashed his. its in this threado n how he got it back http://discuss.treocentral.com/showthread.php?t=166474
  9. #689  
    I kept having a lagging issue with the wm6 full rom so I removed it and put the wm5 from here http://discussion.wmexperts.com/showthread.php?t=139379 .I really like the wm6 so is there a way to get the lagging to stop? and also if the answer is in this thread just say stupid and I will know
  10. #690  
    Britt;

    Which ROM did you use?
    WM6 Stripped?

    WM6 Full?

    I am using the WM6 Stripped, and I love it. No issues with speed or lag here!
  11.    #691  
    Quote Originally Posted by aenigma View Post
    now it will not even power on.
    battery out pluged in, just battery in and any combo of holding buttons and power have not worked.

    Other than " your phone is trash "
    Does anyone have any ideas to get back to bootloader?
    It won't even power on? Like, at all?

    That is extremely a-typical behaviour. Normally you'll at least get the Treo splash screen, even if (like I did) you trash the boot loader.

    Try this:

    1) Unplug your power cable and remove the battery.
    2) Hold the side button (below the volume rocker).
    3) Replace battery and plug in power cable while holding the side button.

    Report back with what numbers (if any) show on the top of the screen.



    Quote Originally Posted by Juggalo_X View Post
    Ebaggs333, just did a boot loader reflash cuz he trashed his. its in this threado n how he got it back http://discuss.treocentral.com/showthread.php?t=166474
    I wouldn't do this just yet, it's quite easy to trash your phone beyond the point of recovery.

    Lets try the "safer" methods first.


    Quote Originally Posted by mbritt80 View Post
    I kept having a lagging issue with the wm6 full rom so I removed it and put the wm5 from here http://discussion.wmexperts.com/showthread.php?t=139379 .I really like the wm6 so is there a way to get the lagging to stop? and also if the answer is in this thread just say stupid and I will know
    Nab a CPU Scalar.

    I will be releasing a ROM today (*crosses fingers*) that should be superior (I hope) to my original WM6 full ROM.





    Speaking of which:

    Quote Originally Posted by westronic View Post
    Bug report:

    FYI: I am using WM6 full ROM 2. Sometimes my SD Card will stop working (no longer detected). It takes a Soft-Reset to bring it back.

    I am using a 2GB SD Card (Not SDHC).
    I updated some drivers, so try out the new ROM (when I post it).

    I have a 2 GB SD Card as well, and have not experienced this.



    Quote Originally Posted by blakeb View Post
    And another problem. When I try to install something by clicking a cab file, I get the this is not a valid pocketpc application error.
    This has been fixed.


    Quote Originally Posted by dowish View Post
    I am also having active sync problems with the test 3 rom.
    This should be corrected.


    Quote Originally Posted by gksmithlcw View Post
    I found one issue... Settings -> System -> Windows Update.
    Who uses Windows Update for anything?

    I'll look into this, but it's a low priority for me. I'm of half a mind to just drop it completely.


    Quote Originally Posted by blakeb View Post
    The Notes application does not work in testing 3. It doesn't even work when I browse to the note file in file explorer and click on it.
    This should be corrected.



    Quote Originally Posted by blakeb View Post
    When I try and setup my exchange server, it won't let me get past the final screen. The softkeys are wrong. I think the correct softkeys popup when you click the advanced button, and it gets stuck there too.
    This should be corrected. I've at least gotten to the point where I can create an exchange account. I don't actually have one, so I don't have a way of testing it. (Yet.)
  12. #692  
    Quote Originally Posted by lawmangrant View Post
    Britt;

    Which ROM did you use?
    WM6 Stripped?

    WM6 Full?

    I am using the WM6 Stripped, and I love it. No issues with speed or lag here!
    Yes, I used Ebag's Full WM6 Rom.
    I dont even get a charge light, nothing... fully dead.
    <img src="http://img231.imageshack.us/img231/9343/scifinerd7jo.jpg" border="0">
    <img src="http://img109.imageshack.us/img109/9600/pirateuserbar3mz.jpg" border="0">
  13. #693  
    Quote Originally Posted by aenigma View Post
    Yes, I used Ebag's Full WM6 Rom.
    I dont even get a charge light, nothing... fully dead.
    did u put the device in boot loader mode?
  14. #694  
    Quote Originally Posted by Ebag333 View Post
    It won't even power on? Like, at all?

    That is extremely a-typical behaviour. Normally you'll at least get the Treo splash screen, even if (like I did) you trash the boot loader.

    Try this:

    1) Unplug your power cable and remove the battery.
    2) Hold the side button (below the volume rocker).
    3) Replace battery and plug in power cable while holding the side button.

    Report back with what numbers (if any) show on the top of the screen.

    Nothing. Phone makes no attempt to show any kind of life at all.
    <img src="http://img231.imageshack.us/img231/9343/scifinerd7jo.jpg" border="0">
    <img src="http://img109.imageshack.us/img109/9600/pirateuserbar3mz.jpg" border="0">
  15. #695  
    Quote Originally Posted by aenigma View Post
    Nothing. Phone makes no attempt to show any kind of life at all.
    ouch... when u plug the device in does it detect in the hardware profile?
  16. #696  
    Quote Originally Posted by Juggalo_X View Post
    ouch... when u plug the device in does it detect in the hardware profile?
    No, it does not.
    <img src="http://img231.imageshack.us/img231/9343/scifinerd7jo.jpg" border="0">
    <img src="http://img109.imageshack.us/img109/9600/pirateuserbar3mz.jpg" border="0">
  17. #697  
    Quote Originally Posted by aenigma View Post
    No, it does not.
    sounds pretty dead.

    maybe ebags333 will have an idea.
  18. 1FstYota's Avatar
    Posts
    87 Posts
    Global Posts
    112 Global Posts
    #698  
    Can't wait to try out the new rom, keep up the good work ebag!!
  19. #699  
    Quote Originally Posted by lawmangrant View Post
    Britt;

    Which ROM did you use?
    WM6 Stripped?

    WM6 Full?

    I am using the WM6 Stripped, and I love it. No issues with speed or lag here!
    tried full and the lag was ridiculous, then tried partial and it didn't have the features that were in the full version that I really liked so until he gives his update I will go with the modified wm5. the full wm6 is awesome but hangs up to much for me
  20. #700  
    found xcpuscalar free version(aka trial) the upgraded wm5 is def faster

Posting Permissions