Results 1 to 12 of 12
  1. T-ulk's Avatar
    Posts
    414 Posts
    Global Posts
    443 Global Posts
       #1  
    pc does not detect the card using card reader? I hve tried diff pc's and card reader but does not work. how do I make it work on pc? any help appreciated.
  2. #2  
    Not much info to go on here. If you're talking about a 4GB card, then chances are it's SDHC. Is your card reader SDHC compatible or is it only for the older SD?
    Treo 750 | AT&T | WM6| TREO750-2.27-RWE | FW 1.54.01.00

    My Treo freeware apps - http://slicktools.itrello.com
    My favorite software picks - http://slicktools.itrello.com/750-picks.html
  3. T-ulk's Avatar
    Posts
    414 Posts
    Global Posts
    443 Global Posts
       #3  
    how do I find out? nothign written on the reader...anyway I can just format the card?
  4. #4  
    Need a reader to format the card.

    Does the card have any markings for SD or SDHC?

    Try checking with friends or coworkers for another reader that can handle SDHC. Or go to your local computer store and maybe they can check if the card will read.
    Treo 750 | AT&T | WM6| TREO750-2.27-RWE | FW 1.54.01.00

    My Treo freeware apps - http://slicktools.itrello.com
    My favorite software picks - http://slicktools.itrello.com/750-picks.html
  5. holmes4's Avatar
    Posts
    982 Posts
    Global Posts
    984 Global Posts
    #5  
    As fastlerner implies, the symptom suggests that the card is an SDHC which non-SDHC readers will not see. On the other hand, I have had a heck of a time getting any SD reader on my PC to see a regular 2GB MiniSD card
  6. T-ulk's Avatar
    Posts
    414 Posts
    Global Posts
    443 Global Posts
       #6  
    yes card has SDHC written on them...thanx for replies...anyway to format via treo? also when i try to install antomy flash cards from medical wizards.com installation says i dont have enough memory on my card!! is it the prob with software and not the card?
  7. #7  
    Hmm... If the software version in your signature is for your Treo, then it looks like you're still on WM5.

    WM5 does not have SDHC drivers and will not correctly read the card's capacity or be able to use it all.

    Upgrade to WM6 and you shouldn't have any more issues with it. Also, invest in an SDHC reader. They're relatively cheap on ebay.
    Treo 750 | AT&T | WM6| TREO750-2.27-RWE | FW 1.54.01.00

    My Treo freeware apps - http://slicktools.itrello.com
    My favorite software picks - http://slicktools.itrello.com/750-picks.html
  8. T-ulk's Avatar
    Posts
    414 Posts
    Global Posts
    443 Global Posts
       #8  
    ok...i will try that...thanx
  9. T-ulk's Avatar
    Posts
    414 Posts
    Global Posts
    443 Global Posts
       #9  
    i dont know...y i get this error when installing sf??
    Attached Images Attached Images
  10. #10  
    If you are on WM5, then your device cannot properly read an SDHC card. It does not have the drivers for it and will not report the memory correctly.
    Treo 750 | AT&T | WM6| TREO750-2.27-RWE | FW 1.54.01.00

    My Treo freeware apps - http://slicktools.itrello.com
    My favorite software picks - http://slicktools.itrello.com/750-picks.html
  11. T-ulk's Avatar
    Posts
    414 Posts
    Global Posts
    443 Global Posts
       #11  
    same prob even after wm6!!! sf installation does not detect the card..
  12. #12  
    no clue. not sure what attempting to use the SDHC card without the drivers may have done. I would suggest reformatting the SD card with FAT32 before you give up on it.
    Treo 750 | AT&T | WM6| TREO750-2.27-RWE | FW 1.54.01.00

    My Treo freeware apps - http://slicktools.itrello.com
    My favorite software picks - http://slicktools.itrello.com/750-picks.html

Posting Permissions