Page 4 of 10 FirstFirst 123456789 ... LastLast
Results 61 to 80 of 181
  1. TazUk's Avatar
    Posts
    689 Posts
    Global Posts
    719 Global Posts
    #61  
    Quote Originally Posted by fbmg View Post
    TThe link is gone on the webpage but if you use this link you can download it anyway ?
    http://www.vodafone.nl/Vodafone/soft...50v_update.zip
    Nope, what you can download is a 1Kb zip file which when extracted has a readme.txt file in it which says the following

    file no longer up for download
  2. #62  
    As I can understand, this update is older than the cingular one. The vodafone FW is 1.12.xxx, the cingular one is 1.17.xxx.

    Infact with the cingualr rom some problems using the treo as USB modem seem solved.

    Original vodafone rom: the connection hangs after few minutes in umts and after few seconds in HSDPA

    "New" vodafone rom: same as above

    Cingular rom: the connection is almost stable in UMTS and hangs after few minutes in HSDPA.

    If you have already the cingular rom this is not an upgrade, is a downgrade.
    -------------------------------------------------

    Ericsson/Sonyericsson SH 668 > SH868 > SH888 > R320 >T39m > T65 >T68mc > R380 > P800 > Z600 > Z1010 > K608i
    Siemens ME45 > S55 > SL55
    Motorola 6200 > C333 > C350 > V547 > E1000 > A1000
    Nokia 7110 > 6230 > 6630 > 6230i> E60 > N80
    Panasonic G500 > GD90 > VS3
    Philips Fisio 820 > 825
    Palm Treo 650 > Treo 750V
    Samsung ZV40 > SGH-Z560
    NEC 338 > 616
  3. #63  
    The Cingular firmware is 1.13, the software is 1.17. The vodaphone rom is a lower number, but the Microsoft build numbers are higher. Both the original Vodaphone ROMs and the Cingular ROMs show AKU 2.3. The new ROM shows AKU 2.6.

    Having said that, it's pretty difficult to tell any difference between them.
    Main Phone: Treo 270/600/650/700w/700p/750v/Motorola Q/iPhone
    Tried but sold: Motorola Q/Nokia E61/700wx/HTC TyTN/Treo 680
  4. #64  
    The Cingular firmware is 1.13, the software is 1.17.
    I'm sorry but im my phone I read

    Firmware version:

    1.17.20.00.

    Where I can find the infos about software and AKU ?
    -------------------------------------------------

    Ericsson/Sonyericsson SH 668 > SH868 > SH888 > R320 >T39m > T65 >T68mc > R380 > P800 > Z600 > Z1010 > K608i
    Siemens ME45 > S55 > SL55
    Motorola 6200 > C333 > C350 > V547 > E1000 > A1000
    Nokia 7110 > 6230 > 6630 > 6230i> E60 > N80
    Panasonic G500 > GD90 > VS3
    Philips Fisio 820 > 825
    Palm Treo 650 > Treo 750V
    Samsung ZV40 > SGH-Z560
    NEC 338 > 616
  5. #65  
    I don't still have the Cingular one anymore so I guess I'm wrong. However keep in mind that this is nothing that says the firmware version corresponds between the vendors. A Vodaphone 1.1 ROM could be newer or old than a 1.2 Cingular ROM. I don't think the numbers can be compared.

    For the software build number, go to settings, system, about, version. On the new Vodaphone build, it shows as Version 5.0 OS 5.1.195 (Build 14995.2.6.3). The 2.6.3 at the end is referred to as AKU 2.6. I think the earlier rom had 2.3.2 which is referred to as AKU 2.3.

    Quote Originally Posted by The Solutor View Post
    I'm sorry but im my phone I read

    Firmware version:

    1.17.20.00.

    Where I can find the infos about software and AKU ?
    Main Phone: Treo 270/600/650/700w/700p/750v/Motorola Q/iPhone
    Tried but sold: Motorola Q/Nokia E61/700wx/HTC TyTN/Treo 680
  6. #66  
    Ok, thanks for the infos.
    -------------------------------------------------

    Ericsson/Sonyericsson SH 668 > SH868 > SH888 > R320 >T39m > T65 >T68mc > R380 > P800 > Z600 > Z1010 > K608i
    Siemens ME45 > S55 > SL55
    Motorola 6200 > C333 > C350 > V547 > E1000 > A1000
    Nokia 7110 > 6230 > 6630 > 6230i> E60 > N80
    Panasonic G500 > GD90 > VS3
    Philips Fisio 820 > 825
    Palm Treo 650 > Treo 750V
    Samsung ZV40 > SGH-Z560
    NEC 338 > 616
  7. jbcross's Avatar
    Posts
    219 Posts
    Global Posts
    222 Global Posts
    #67  
    When I downloaded - the file is empty and says...."No longer available for download"

    I will be happy to host it on my ftp if someone would be kind enough to send me a copy.

    Thanks.
    Jeff
  8. #68  
    can anyone just extract the aku 2.6 version or something so us 700 owners can install it also?
  9. #69  
    I did the update, all looks fine so far, except the version numbers.
    After the update i got:

    Os version 5.1.195
    (Build 14995.2.6.3)
    Software version TREO750-1.12-VCF (instead of TREO750-1.15-VFE), same as before update
    Firmware version 1.12.0c.00

    Bootloader
    IP-0.20
    SPL-0.21.0000 (instead of SPL-0.18.000)

    strange what did i wrong ?
  10. #70  
    Quote Originally Posted by naftalim View Post
    I tired these instructions and all I ended up doing is a hard reset

    I assume that in order to install a ROM update off the storage card file, I need to do some sequence of keys, but this is confusing.

    Does Reset in this case mean the "Reset" we do with our Stylus in the storage card area?
    I assume red button means the End Button?

    What I see on the screen are 4 bars, Red, Greeen Blue and White
    Red Bar says Palm Tr
    IP-0.20

    Green Bar says Palm Tr
    SPL-o.18.000

    White bar says "Serial"

    Thanks
    I'm having the same problem...i have formatted the mini sd card using flash format from my treo as i dont have a sd card adaptor to use the laptop...i also tried the cingular update and it just hangs
  11. #71  
    The download link was removed ! Any kind soul to share the updates on a ftp site ?
  12. #72  
    Quote Originally Posted by jbcross View Post
    When I downloaded - the file is empty and says...."No longer available for download"

    I will be happy to host it on my ftp if someone would be kind enough to send me a copy.

    Thanks.
    Jeff
    I have the downloaded file if you want to send me ftp details
    Si
  13. #73  
    -------------------------------------------------

    Ericsson/Sonyericsson SH 668 > SH868 > SH888 > R320 >T39m > T65 >T68mc > R380 > P800 > Z600 > Z1010 > K608i
    Siemens ME45 > S55 > SL55
    Motorola 6200 > C333 > C350 > V547 > E1000 > A1000
    Nokia 7110 > 6230 > 6630 > 6230i> E60 > N80
    Panasonic G500 > GD90 > VS3
    Philips Fisio 820 > 825
    Palm Treo 650 > Treo 750V
    Samsung ZV40 > SGH-Z560
    NEC 338 > 616
  14. #75  
    Thanks for the link.

    Btw what is the different between the above updates links and http://www.vodafone.nl/Vodafone/wg20...ase%201.16.exe ?

    I used the Desktopupdate 1.16 and this is what I have now:

  15. #76  
    hagenuk,

    can you tell me what your software version was before update? did you have
    TREO750-1.16-VFE before the update?
    --
    I used the NBH update [via miniSD] my software version before update was TREO750-1.15-VFE and after the update I still had TREO750-1.15-VFE, my aku changed from 2.3 to 2.6 though same as yours.
    --
    This update might just be a desktop version [with release notes looks like it] of the NBH update.
    Bny Castro

    MTFBWY...
    my blog | twitter
  16. #77  
    Looks like an update for the Cingular US version is coming as well. Just read it in the journal. Great news! They said should see it in a few days or weeks, but knowing cingular - might be months
  17. #78  
    I tried running the update and on the welcome screen it states that data would be intact. I don't have my charger with me ATM so I couldn't continue. Can you confirm that this update does not require a HR after?
    Bny Castro

    MTFBWY...
    my blog | twitter
  18. #79  
    Quote Originally Posted by bnycastro View Post
    hagenuk,

    can you tell me what your software version was before update? did you have
    TREO750-1.16-VFE before the update?
    --
    I used the NBH update [via miniSD] my software version before update was TREO750-1.15-VFE and after the update I still had TREO750-1.15-VFE, my aku changed from 2.3 to 2.6 though same as yours.
    --
    This update might just be a desktop version [with release notes looks like it] of the NBH update.
    Hi bnycastro,

    Before the upgrade, it was TREO750-1.15-VFE and Build 14995.2.3.2 and firmware I remember seeing 1.12.0a.

    Does Build 14995.2.6.3 mean AKU 2.6 ?

    Anyway after upgrading I don't see any performance improvement

    Btw, i'm using a unlocked Palm Vodaphone 750v from Singapore.
    Last edited by hagenuk; 02/21/2007 at 10:49 PM. Reason: Added firmware version
  19. #80  
    Quote Originally Posted by bnycastro View Post
    I tried running the update and on the welcome screen it states that data would be intact. I don't have my charger with me ATM so I couldn't continue. Can you confirm that this update does not require a HR after?
    Hi Bnycastro,

    After the upgrade, all my data are intact....no hard-reset was required. I did the upgrade with combo(Syn + charging) data cable so I didn't have the charger connected. The upgrade too about 16mins to complete.
Page 4 of 10 FirstFirst 123456789 ... LastLast

Posting Permissions