Results 1 to 6 of 6
  1.    #1  
    Help Me With UberKernel 1GHz

    I Always Keep My Govnah At Peformance The Govnah Data Is At The Bottom. Can Any Body Tell Me If This Is Safe?

    Govnah Data
    Min Freq : 1GHz
    Max Freq : 1GHz
    Low Batt : 1GHz
    Compressed Swap : 48MB
    My Battery Dies Quickly But I Dont Mind. So What Will Provide The Best Peformance.
    Thank You.
  2. #2  
    Which phone do you have, why not put it on screenstate will help you with the battery and give you the SAME performance. With 48MB compressed swap is usually good only for pre minus
    If this helped you hit thanks.
  3. #3  
    You can go into the advanced settings and lower the core voltage to a lower setting. I use the performance govenor also with the Minimum set to 600MHz. This might improve your battery life.

    Edit: Also I would recommend leaving the Low battery setting at the default 500MHz.
    Last edited by vza33; 10/27/2010 at 12:36 PM.
    "Patience, use the force, think." Obi-Wan


    Ready to try Preware? Get this first: Preware Homebrew Documentation
  4.    #4  
    Does It Still Peform Like The 1ghZ SnapDragon Processor.
    The Screen State
    Which One Do I Use The 500/1000 or 127/1000 or 720/1000
    Which One Do You Have On The Sprint Palm Pre?
    Does It Make It More Smother When Compacae Is Set On 128MB?
  5. #5  
    @op: Thanks, i caN reaD thiS eveN withouT mY glasseS.
  6. #6  
    Quote Originally Posted by kkhanmd View Post
    Which phone do you have, why not put it on screenstate will help you with the battery and give you the SAME performance. With 48MB compressed swap is usually good only for pre minus
    Does using compressed swap affect battery life?

    Thanks!
    "If you can't view and manage multiple apps, via multiple open windows, side-by-side, it's not multi-tasking, PERIOD." - Me

Tags for this Thread

Posting Permissions