Page 2 of 5 FirstFirst 12345 LastLast
Results 21 to 40 of 98
  1. #21  
    OK, so it didn't do anything with GPS. Although the binary file does contain some location functions, it actually refers to a context file located in /var/context/contextfile. This file lists all the apps loaded on the phone. Not sure if that may have been a process that just so happened to be running at the time I ran ps. Probably ran because I opened the app.
  2.    #22  
    Hmmm... We really need a modprobe -l from a Sprint phone.

    I am thinking that it may not be much different. Most of these smaller devices have a 2 for 1 device. GPS may be tied into wifi or whatnot.

    Would lspci even work? lol

    I get the impression that somehow there is something calling something that is the deal breaker here. I am thinking it has got to do with vznav. Can you try and launch vznav from the term? See the output?
    Last edited by corbintechboy; 05/06/2010 at 12:37 AM.
  3. #23  
    Quote Originally Posted by corbintechboy View Post
    Hmmm... We really need a modprobe -l from a Sprint phone.

    I am thinking that it may not be much different. Most of these smaller devices have a 2 for 1 device. GPS may be tied into wifi or whatnot.

    Would lspci even work? lol

    I get the impression that somehow there is something calling something that is the deal breaker here. I am thinking it has got to do with vznav. Can you try and launch vznav from the term? See the output?
    Yea, I just posted on the main forum for Sprint Pre users to see it. If no one is able to do it, I know someone with a Sprint Pre, but won't see him again until next week, so slow going.

    I'm going to call it a night because it's late for me and I know I won't make it into work tomorrow if I keep going. Also, precentral is at it's worst time (probably doing backups). Took me about 10 minutes to reply....

    I'll try to check back in the morning... have a good night.
    Last edited by sf_basilix; 05/06/2010 at 12:48 AM.
  4.    #24  
    Quote Originally Posted by sf_basilix View Post
    Yea, I just posted on the main forum for Sprint Pre users to see it. If no one is able to do it, I know someone with a Sprint Pre, but won't see him again until next week, so slow going.

    I'm going to call it a night because it's late for me and I know I won't make it into work tomorrow if I keep going. Also, precentral is at it's worst time (probably doing backups). Took me about 10 minutes to reply....

    I'll try to check back in the morning... have a good night.
    Thanks for looking into this. I hope we can figure something out and get GPS working for the masses .

    Have a good night...

    Hope I will get Pre in the morning .
  5. #25  
    One last comment before I call it quits. I really think it has something to do with that VZNavigatorService. I was just listening to the podcast and found out that someone else tried this and his gps failed completely when he removed the VZNavigatorService program as well. Unfortunately there is nothing we can do with that binary, so I'm hoping someone with a Pre on Sprint can get us a file that will turn the GPS receiver on and we can bypass the VZNavigatorService.
  6.    #26  
    Could let the service run and run a "dmesg" and see if it loads anything else?

    Wish I would of thought of that earlier.
  7. #27  
    OMG....now we are getting somewhere!!!
  8. #28  
    just saw a post saying that the 'simple gps' app in preware seems to bw effective in getting a lock. Can you see what that app is doin?
  9. #29  
    just saw a post saying that the 'simple gps' app in preware seems to be effective in getting a lock. Can you see what that app is doing?
  10. #30  
    Quote Originally Posted by Cantaffordit View Post
    just saw a post saying that the 'simple gps' app in preware seems to be effective in getting a lock. Can you see what that app is doing?
    Sure - I'm tied up right now, but will try this later this afternoon. I didn't get any responses yet for sprint pre users who can shell into theirs, so I'm going to call a friend who has one to send me his output. Be back later today with some answers...
  11. #31  
    Quote Originally Posted by corbintechboy View Post
    Could let the service run and run a "dmesg" and see if it loads anything else?

    Wish I would of thought of that earlier.
    I will do this too....
  12. #32  
    also, a new thread was started here specifically for troubleshooting and testing the gps stuff. Specified no whining or conspiracy theories. You might want to post this stuff over there?
  13. #33  
    can you send me the link to that thread and/or post this thread over there? We should merge our efforts instead of running with this in parallel.

    maybe even start a new one....
  14. #34  
    Quote Originally Posted by sf_basilix View Post
    can you send me the link to that thread and/or post this thread over there? We should merge our efforts instead of running with this in parallel.

    maybe even start a new one....
    http://m.forums.precentral.net/palm-pre-tips-information-resources/245253-official-gps-troubleshooting-thread.html
  15.    #36  
    I would rather like to keep the info we gather here.

    I understand the point of not scattering the info, but I do think we will make headway and we may have to dig through mounds of info to find our posts.

    Just a thought...
  16. #37  
    Quote Originally Posted by corbintechboy View Post
    I would rather like to keep the info we gather here.

    I understand the point of not scattering the info, but I do think we will make headway and we may have to dig through mounds of info to find our posts.

    Just a thought...
    I agree we need to chose one or the other. The point is to create a no-whining zone where talent like yours can explore this without the contant conspiracy theories and people declaring that Palm and/or Verizon will be out of business because of this.

    The value of the other thread is the title. The Mods should make one of them sticky and point the other to the sticky thread.

    Just please let's keep trouble shooting, and find a whining-free place to help each other!

    Cheers,
  17. #38  
    I sort of agree with you there. I think if we deal with the details on diagnosing the issue here but report our findings on the other thread, we won't bury each other with too much detail. As long as there's a single thread everyone is referencing, we can just return and report our specific findings so others aren't doing the same thing.

    running dmesg now... back shortly...
  18.    #39  
    Just let me know where this post is going and I am there .

    EDIT: LOL! I posted that after you.

    Good luck with dmesg.
  19. #40  
    OK, dmesg before opening google maps:

    Code:
    0100
    [40655.760000] fastpath_fastsleep: Non RTC Wakeup
    [40655.760000] twl4030_phy_resume: mode=1
    [40655.770000] musb_softconn: on
    [40655.770000] twl4030_phy_suspend: irq_disable=0
    [40655.770000] phy_suspend: enter
    [40655.770000] musb_softconn: off
    [40655.820000] Restarting tasks ... <6>timechange: time was changed.
    [40655.970000] done.
    [40657.070000] twl4030_audio_audio_resume: resuming codec
    [40657.070000] CODEC ref count = 1
    [40657.400000] timechange: time was changed.
    [40657.680000] CODEC ref count = 2
    [40657.750000] DSPBRIDGE: SHM Alloc from USER MEM, shm_size = 0x5b5000phys_mempool_base = 0x9f900000, phys_mempool_size = 0x600000
    [40657.750000] DSPBRIDGE: PROC_Stop SUCCESS, proc state = 0x0
    [40657.750000] DSPBRIDGE: DSP/BIOS Bridge driver loaded SUCCESS
    [40657.760000] Vibetonz: New data value timed out!
    [40657.760000] CODEC ref count = 1
    [40657.760000] CODEC ref count = 2
    [40658.090000] CODEC ref count = 1
    [40658.960000] DSPBRIDGE: PROC_Stop SUCCESS, proc state = 0x0
    [40658.960000] DSPBRIDGE: PROC_Stop SUCCESS, proc state = 0x0
    [40658.980000] DSPBRIDGE: PROC_Load SUCCESS, proc state = 0x1
    [40658.990000] DSPBRIDGE: PROC_Start SUCCESS, proc state = 0x2
    [40662.140000] twl4030_audio_audio_suspend: suspending codec
    [40662.140000] CODEC ref count = 0
    [40662.430000] Syncing filesystems ... skipped for target platform ... done.
    [40662.430000] Freezing user space processes ... (elapsed 0.00 seconds) done.
    [40662.440000] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
    [40662.440000] Suspending console(s)
    [40662.680000] suspend_device(): platform_suspend+0x0/0x34() returns -16
    [40662.680000] Could not suspend device gpio-keys: error -16
    [40662.730000] Some devices failed to suspend
    [40662.730000] Restarting tasks ... done.
    [40663.150000] timechange: time was changed.
    [40666.200000] twl4030_audio_audio_resume: resuming codec
    [40666.200000] CODEC ref count = 1
    [40667.760000] Waited 5 ms for DSP hibernation
    [40671.600000] twl4030_audio_audio_suspend: suspending codec
    [40671.600000] CODEC ref count = 0
    [40681.720000] twl4030_audio_audio_resume: resuming codec
    [40681.720000] CODEC ref count = 1
    [40683.350000] Timeout in prcm_check_power_domain_status(), domain 9, desired state 1, current state 3
    [40691.510000] timechange: time was changed.
    [40776.770000] timechange: time was changed.
    [40779.780000] twl4030_audio_audio_suspend: suspending codec
    [40779.790000] CODEC ref count = 0
    [40783.850000] mdm_act:    4048385: modem wakeup timeout
    [40900.510000] Syncing filesystems ... skipped for target platform ... done.
    [40900.510000] Freezing user space processes ... (elapsed 0.00 seconds) done.
    [40900.520000] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
    [40900.520000] Suspending console(s)
    [40900.810000] musb_suspend 2197: suspend from 0 -> 2
    [40900.810000] musb_suspend 2231: idle, standby etc.
    [40900.810000] twl4030_phy_suspend: irq_disable=1
    [40900.810000] twl4030_phy_suspend: phy is already asleep
    [40900.850000] rtc_alarm: Read current rtc alarm of 04:21:26
    [40900.850000] fastpath_prepare: RTC = 04:12:09, UserAlarm = 04:21:26, NextFastWake = 04:12:24
    [40900.850000] fastpath_prepare: Alarm set after 15 seconds by fastpath client : TCP Fastpath Client
    [40900.850000] 00042276.230: enter suspend
    [40900.850000] 00042276.698: leave suspend
    [40900.850000] WAKEUP STATE/REASON
    [40900.850000] PM_WKST_WKUP      00000100
    [40900.850000] fastpath_fastsleep: Non RTC Wakeup
    [40900.850000] twl4030_phy_resume: mode=1
    [40900.860000] musb_softconn: on
    [40900.860000] twl4030_phy_suspend: irq_disable=0
    [40900.860000] phy_suspend: enter
    [40900.860000] musb_softconn: off
    [40900.910000] Restarting tasks ... done.
    [40902.100000] Syncing filesystems ... skipped for target platform ... done.
    [40902.100000] Freezing user space processes ... (elapsed 0.00 seconds) done.
    [40902.110000] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
    [40902.110000] Suspending console(s)
    [40902.410000] musb_suspend 2197: suspend from 0 -> 2
    [40902.410000] musb_suspend 2231: idle, standby etc.
    [40902.410000] twl4030_phy_suspend: irq_disable=1
    [40902.410000] twl4030_phy_suspend: phy is already asleep
    [40902.420000] rtc_alarm: Read current rtc alarm of 04:21:27
    [40902.420000] fastpath_prepare: RTC = 04:12:11, UserAlarm = 04:21:27, NextFastWake = 04:22:09
    [40902.420000] fastpath_prepare: Alarm set after 598 seconds by fastpath client : Battery Check Fastpath Client
    [40902.420000] 00042278.269: enter suspend
    [40902.420000] 00042546.383: leave suspend
    [40902.420000] WAKEUP STATE/REASON
    [40902.420000] PM_WKST_WKUP      00000108
    [40902.420000] fastpath_fastsleep: Non RTC Wakeup
    [40902.420000] twl4030_phy_resume: mode=1
    [40902.430000] musb_softconn: on
    [40902.430000] twl4030_phy_suspend: irq_disable=0
    [40902.430000] phy_suspend: enter
    [40902.430000] musb_softconn: off
    [40902.480000] Restarting tasks ... <6>timechange: time was changed.
    [40902.540000] done.
    [40903.000000] timechange: time was changed.
    [40905.600000] Syncing filesystems ... skipped for target platform ... done.
    [40905.610000] Freezing user space processes ... (elapsed 0.00 seconds) done.
    [40905.610000] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
    [40905.610000] Suspending console(s)
    [40905.910000] musb_suspend 2197: suspend from 0 -> 2
    [40905.910000] musb_suspend 2231: idle, standby etc.
    [40905.910000] twl4030_phy_suspend: irq_disable=1
    [40905.910000] twl4030_phy_suspend: phy is already asleep
    [40905.920000] rtc_alarm: Read current rtc alarm of 04:21:27
    [40905.920000] fastpath_prepare: RTC = 04:16:43, UserAlarm = 04:21:27, NextFastWake = 04:22:09
    [40905.920000] fastpath_prepare: Alarm set after 326 seconds by fastpath client : Battery Check Fastpath Client
    [40905.920000] 00042549.884: enter suspend
    [40905.920000] 00042833.875: leave suspend
    [40905.920000] WAKEUP STATE/REASON
    [40905.920000] PM_WKST_WKUP      00000108
    [40905.920000] rtc_alarm: Read current rtc alarm of 04:21:27
    [40905.920000] fastpath_fastsleep: RTC Wakeup for User Alarm
    [40905.930000] twl4030_phy_resume: mode=1
    [40905.930000] musb_softconn: on
    [40905.930000] twl4030_phy_suspend: irq_disable=0
    [40905.940000] phy_suspend: enter
    [40905.940000] musb_softconn: off
    [40906.020000] Restarting tasks ... <6>timechange: time was changed.
    [40906.050000] done.
    [40911.660000] Syncing filesystems ... skipped for target platform ... done.
    [40911.660000] Freezing user space processes ... (elapsed 0.00 seconds) done.
    [40911.670000] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
    [40911.670000] Suspending console(s)
    [40911.970000] musb_suspend 2197: suspend from 0 -> 2
    [40911.970000] musb_suspend 2231: idle, standby etc.
    [40911.970000] twl4030_phy_suspend: irq_disable=1
    [40911.970000] twl4030_phy_suspend: phy is already asleep
    [40911.980000] rtc_alarm: Read current rtc alarm of 04:24:17
    [40911.980000] fastpath_prepare: RTC = 04:21:33, UserAlarm = 04:24:17, NextFastWake = 04:22:09
    [40911.980000] fastpath_prepare: Alarm set after 36 seconds by fastpath client : Battery Check Fastpath Client
    [40911.980000] 00042839.936: enter suspend
    [40911.980000] 00042875.875: leave suspend
    [40911.980000] WAKEUP STATE/REASON
    [40911.980000] PM_WKST_WKUP      00000108
    [40911.980000] rtc_alarm: Read current rtc alarm of 04:22:09
    [40911.980000] fastpath_fastsleep: RTC Wakeup for Fastpath client : Battery Check Fastpath Client
    [40912.020000] 00042875.918: enter suspend
    [40912.020000] 00043003.875: leave suspend
    [40912.020000] WAKEUP STATE/REASON
    [40912.020000] PM_WKST_WKUP      00000108
    [40912.020000] rtc_alarm: Read current rtc alarm of 04:24:17
    [40912.020000] fastpath_fastsleep: RTC Wakeup for User Alarm
    [40912.030000] twl4030_phy_resume: mode=1
    [40912.030000] musb_softconn: on
    [40912.040000] twl4030_phy_suspend: irq_disable=0
    [40912.040000] phy_suspend: enter
    [40912.040000] musb_softconn: off
    [40912.100000] Restarting tasks ... <6>timechange: time was changed.
    [40912.170000] done.
    [40917.800000] Syncing filesystems ... skipped for target platform ... done.
    [40917.800000] Freezing user space processes ... (elapsed 0.00 seconds) done.
    [40917.810000] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
    [40917.810000] Suspending console(s)
    [40918.060000] musb_suspend 2197: suspend from 0 -> 2
    [40918.060000] musb_suspend 2231: idle, standby etc.
    [40918.060000] twl4030_phy_suspend: irq_disable=1
    [40918.060000] twl4030_phy_suspend: phy is already asleep
    [40918.070000] rtc_alarm: Read current rtc alarm of 04:41:32
    [40918.070000] fastpath_prepare: RTC = 04:24:23, UserAlarm = 04:41:32, NextFastWake = 04:32:09
    [40918.070000] fastpath_prepare: Alarm set after 466 seconds by fastpath client : Battery Check Fastpath Client
    [40918.070000] 00043009.924: enter suspend
    [40918.070000] 00043475.875: leave suspend
    [40918.070000] WAKEUP STATE/REASON
    [40918.070000] PM_WKST_WKUP      00000108
    [40918.070000] rtc_alarm: Read current rtc alarm of 04:32:09
    [40918.070000] fastpath_fastsleep: RTC Wakeup for Fastpath client : Battery Check Fastpath Client
    [40918.110000] 00043475.917: enter suspend
    [40918.110000] 00044027.627: leave suspend
    [40918.110000] WAKEUP STATE/REASON
    [40918.110000] PM_WKST_WKUP      00000100
    [40918.110000] fastpath_fastsleep: Non RTC Wakeup
    [40918.110000] twl4030_phy_resume: mode=1
    [40918.120000] musb_softconn: on
    [40918.120000] twl4030_phy_suspend: irq_disable=0
    [40918.120000] phy_suspend: enter
    [40918.120000] musb_softconn: off
    [40918.170000] Restarting tasks ... <6>timechange: time was changed.
    [40918.240000] done.
    [40919.870000] timechange: time was changed.
    [40923.710000] Syncing filesystems ... skipped for target platform ... done.
    [40923.710000] Freezing user space processes ... (elapsed 0.00 seconds) done.
    [40923.710000] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
    [40923.710000] Suspending console(s)
    [40924.430000] musb_suspend 2197: suspend from 0 -> 2
    [40924.430000] musb_suspend 2231: idle, standby etc.
    [40924.430000] twl4030_phy_suspend: irq_disable=1
    [40924.430000] twl4030_phy_suspend: phy is already asleep
    [40924.440000] rtc_alarm: Read current rtc alarm of 04:41:31
    [40924.440000] fastpath_prepare: RTC = 04:41:27, UserAlarm = 04:41:31, NextFastWake = 04:42:09
    [40924.440000] fastpath_prepare: Alarm set after 42 seconds by fastpath client : Battery Check Fastpath Client
    [40924.440000] 00044033.959: enter suspend
    [40924.440000] 00044037.875: leave suspend
    [40924.440000] WAKEUP STATE/REASON
    [40924.440000] PM_WKST_WKUP      00000108
    [40924.440000] rtc_alarm: Read current rtc alarm of 04:41:31
    [40924.440000] fastpath_fastsleep: RTC Wakeup for User Alarm
    [40924.450000] twl4030_phy_resume: mode=1
    [40924.450000] musb_softconn: on
    [40924.460000] twl4030_phy_suspend: irq_disable=0
    [40924.460000] phy_suspend: enter
    [40924.460000] musb_softconn: off
    [40924.510000] Restarting tasks ... <6>timechange: time was changed.
    [40924.600000] done.
    [40933.090000] Syncing filesystems ... skipped for target platform ... done.
    [40933.090000] Freezing user space processes ... (elapsed 0.01 seconds) done.
    [40933.100000] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
    [40933.100000] Suspending console(s)
    [40933.400000] musb_suspend 2197: suspend from 0 -> 2
    [40933.400000] musb_suspend 2231: idle, standby etc.
    [40933.400000] twl4030_phy_suspend: irq_disable=1
    [40933.400000] twl4030_phy_suspend: phy is already asleep
    [40933.410000] rtc_alarm: Read current rtc alarm of 04:49:17
    [40933.410000] fastpath_prepare: RTC = 04:41:40, UserAlarm = 04:49:17, NextFastWake = 04:42:09
    [40933.410000] fastpath_prepare: Alarm set after 29 seconds by fastpath client : Battery Check Fastpath Client
    [40933.410000] 00044046.844: enter suspend
    [40933.410000] 00044075.875: leave suspend
    [40933.410000] WAKEUP STATE/REASON
    [40933.410000] PM_WKST_WKUP      00000108
    [40933.410000] rtc_alarm: Read current rtc alarm of 04:42:09
    [40933.410000] fastpath_fastsleep: RTC Wakeup for Fastpath client : Battery Check Fastpath Client
    [40933.450000] 00044075.918: enter suspend
    [40933.450000] 00044503.875: leave suspend
    [40933.450000] WAKEUP STATE/REASON
    [40933.450000] PM_WKST_WKUP      00000108
    [40933.450000] rtc_alarm: Read current rtc alarm of 04:49:17
    [40933.450000] fastpath_fastsleep: RTC Wakeup for User Alarm
    [40933.460000] twl4030_phy_resume: mode=1
    [40933.460000] musb_softconn: on
    [40933.470000] twl4030_phy_suspend: irq_disable=0
    [40933.470000] phy_suspend: enter
    [40933.470000] musb_softconn: off
    [40933.520000] Restarting tasks ... <6>timechange: time was changed.
    [40933.590000] done.
    [40939.210000] Syncing filesystems ... skipped for target platform ... done.
    [40939.210000] Freezing user space processes ... (elapsed 0.00 seconds) done.
    [40939.210000] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
    [40939.210000] Suspending console(s)
    [40939.460000] musb_suspend 2197: suspend from 0 -> 2
    [40939.460000] musb_suspend 2231: idle, standby etc.
    [40939.460000] twl4030_phy_suspend: irq_disable=1
    [40939.460000] twl4030_phy_suspend: phy is already asleep
    [40939.470000] rtc_alarm: Read current rtc alarm of 05:01:38
    [40939.470000] fastpath_prepare: RTC = 04:49:23, UserAlarm = 05:01:38, NextFastWake = 04:52:09
    [40939.470000] fastpath_prepare: Alarm set after 166 seconds by fastpath client : Battery Check Fastpath Client
    [40939.470000] 00044509.894: enter suspend
    [40939.470000] 00044675.875: leave suspend
    [40939.470000] WAKEUP STATE/REASON
    [40939.470000] PM_WKST_WKUP      00000108
    [40939.470000] rtc_alarm: Read current rtc alarm of 04:52:09
    [40939.470000] fastpath_fastsleep: RTC Wakeup for Fastpath client : Battery Check Fastpath Client
    [40939.510000] 00044675.917: enter suspend
    [40939.510000] 00045068.410: leave suspend
    [40939.510000] WAKEUP STATE/REASON
    [40939.510000] PM_WKST_WKUP      00000108
    [40939.510000] fastpath_fastsleep: Non RTC Wakeup
    [40939.510000] twl4030_phy_resume: mode=1
    [40939.520000] musb_softconn: on
    [40939.520000] twl4030_phy_suspend: irq_disable=0
    [40939.520000] phy_suspend: enter
    [40939.520000] musb_softconn: off
    [40939.570000] Restarting tasks ... <6>timechange: time was changed.
    [40939.640000] done.
    [40940.090000] timechange: time was changed.
    [40970.320000] twl4030_phy_resume: mode=1
    [40970.320000] musb_softconn: on
    [40970.320000] charger_detector: schudule detection
    [40970.380000] musb_stage2_irq 813: SUSPEND (b_idle) devctl 99 power e0
    [40970.610000] musb_stage0_irq 661: BUS RESET as b_idle
    [40970.620000] gadget_event: source=bus mA=100
    [40970.790000] musb_stage0_irq 661: BUS RESET as b_peripheral
    [40970.810000] gadget_event: source=bus mA=100 (no change)
    [40971.050000] g_rockhopper gadget: high speed config #2: ROCKHOPPER
    [40971.050000] musb_hdrc periph: enabled ep2in for bulk IN, dma, maxpacket 512
    [40971.050000] musb_hdrc periph: enabled ep2out for bulk OUT, dma, maxpacket 512
    [40971.050000] musb_hdrc periph: enabled ep1in for bulk IN, dma, maxpacket 512
    [40971.050000] musb_hdrc periph: enabled ep1out for bulk OUT, dma, maxpacket 512
    [40971.050000] g_rockhopper gadget: mass_storage ready
    [40971.050000] charger_detector: cancel detection
    [40971.330000] charger_detector: pullup not detected (> 510ms)
    [40971.330000] gadget_event: host_connected=1
    [40971.330000] gadget_event: source=bus mA=500
    [40972.220000] twl4030_audio_audio_resume: resuming codec
    [40972.220000] CODEC ref count = 1
    [40977.620000] twl4030_audio_audio_suspend: suspending codec
    [40977.620000] CODEC ref count = 0
    [40980.500000] Timeout in prcm_check_power_domain_status(), domain 9, desired state 1, current state 3

    dmesg after opening google maps and failing:


    Code:
    count = 2
    [40657.750000] DSPBRIDGE: SHM Alloc from USER MEM, shm_size = 0x5b5000phys_mempool_base = 0x9f900000, phys_mempool_size = 0x600000
    [40657.750000] DSPBRIDGE: PROC_Stop SUCCESS, proc state = 0x0
    [40657.750000] DSPBRIDGE: DSP/BIOS Bridge driver loaded SUCCESS
    [40657.760000] Vibetonz: New data value timed out!
    [40657.760000] CODEC ref count = 1
    [40657.760000] CODEC ref count = 2
    [40658.090000] CODEC ref count = 1
    [40658.960000] DSPBRIDGE: PROC_Stop SUCCESS, proc state = 0x0
    [40658.960000] DSPBRIDGE: PROC_Stop SUCCESS, proc state = 0x0
    [40658.980000] DSPBRIDGE: PROC_Load SUCCESS, proc state = 0x1
    [40658.990000] DSPBRIDGE: PROC_Start SUCCESS, proc state = 0x2
    [40662.140000] twl4030_audio_audio_suspend: suspending codec
    [40662.140000] CODEC ref count = 0
    [40662.430000] Syncing filesystems ... skipped for target platform ... done.
    [40662.430000] Freezing user space processes ... (elapsed 0.00 seconds) done.
    [40662.440000] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
    [40662.440000] Suspending console(s)
    [40662.680000] suspend_device(): platform_suspend+0x0/0x34() returns -16
    [40662.680000] Could not suspend device gpio-keys: error -16
    [40662.730000] Some devices failed to suspend
    [40662.730000] Restarting tasks ... done.
    [40663.150000] timechange: time was changed.
    [40666.200000] twl4030_audio_audio_resume: resuming codec
    [40666.200000] CODEC ref count = 1
    [40667.760000] Waited 5 ms for DSP hibernation
    [40671.600000] twl4030_audio_audio_suspend: suspending codec
    [40671.600000] CODEC ref count = 0
    [40681.720000] twl4030_audio_audio_resume: resuming codec
    [40681.720000] CODEC ref count = 1
    [40683.350000] Timeout in prcm_check_power_domain_status(), domain 9, desired state 1, current state 3
    [40691.510000] timechange: time was changed.
    [40776.770000] timechange: time was changed.
    [40779.780000] twl4030_audio_audio_suspend: suspending codec
    [40779.790000] CODEC ref count = 0
    [40783.850000] mdm_act:    4048385: modem wakeup timeout
    [40900.510000] Syncing filesystems ... skipped for target platform ... done.
    [40900.510000] Freezing user space processes ... (elapsed 0.00 seconds) done.
    [40900.520000] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
    [40900.520000] Suspending console(s)
    [40900.810000] musb_suspend 2197: suspend from 0 -> 2
    [40900.810000] musb_suspend 2231: idle, standby etc.
    [40900.810000] twl4030_phy_suspend: irq_disable=1
    [40900.810000] twl4030_phy_suspend: phy is already asleep
    [40900.850000] rtc_alarm: Read current rtc alarm of 04:21:26
    [40900.850000] fastpath_prepare: RTC = 04:12:09, UserAlarm = 04:21:26, NextFastWake = 04:12:24
    [40900.850000] fastpath_prepare: Alarm set after 15 seconds by fastpath client : TCP Fastpath Client
    [40900.850000] 00042276.230: enter suspend
    [40900.850000] 00042276.698: leave suspend
    [40900.850000] WAKEUP STATE/REASON
    [40900.850000] PM_WKST_WKUP      00000100
    [40900.850000] fastpath_fastsleep: Non RTC Wakeup
    [40900.850000] twl4030_phy_resume: mode=1
    [40900.860000] musb_softconn: on
    [40900.860000] twl4030_phy_suspend: irq_disable=0
    [40900.860000] phy_suspend: enter
    [40900.860000] musb_softconn: off
    [40900.910000] Restarting tasks ... done.
    [40902.100000] Syncing filesystems ... skipped for target platform ... done.
    [40902.100000] Freezing user space processes ... (elapsed 0.00 seconds) done.
    [40902.110000] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
    [40902.110000] Suspending console(s)
    [40902.410000] musb_suspend 2197: suspend from 0 -> 2
    [40902.410000] musb_suspend 2231: idle, standby etc.
    [40902.410000] twl4030_phy_suspend: irq_disable=1
    [40902.410000] twl4030_phy_suspend: phy is already asleep
    [40902.420000] rtc_alarm: Read current rtc alarm of 04:21:27
    [40902.420000] fastpath_prepare: RTC = 04:12:11, UserAlarm = 04:21:27, NextFastWake = 04:22:09
    [40902.420000] fastpath_prepare: Alarm set after 598 seconds by fastpath client : Battery Check Fastpath Client
    [40902.420000] 00042278.269: enter suspend
    [40902.420000] 00042546.383: leave suspend
    [40902.420000] WAKEUP STATE/REASON
    [40902.420000] PM_WKST_WKUP      00000108
    [40902.420000] fastpath_fastsleep: Non RTC Wakeup
    [40902.420000] twl4030_phy_resume: mode=1
    [40902.430000] musb_softconn: on
    [40902.430000] twl4030_phy_suspend: irq_disable=0
    [40902.430000] phy_suspend: enter
    [40902.430000] musb_softconn: off
    [40902.480000] Restarting tasks ... <6>timechange: time was changed.
    [40902.540000] done.
    [40903.000000] timechange: time was changed.
    [40905.600000] Syncing filesystems ... skipped for target platform ... done.
    [40905.610000] Freezing user space processes ... (elapsed 0.00 seconds) done.
    [40905.610000] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
    [40905.610000] Suspending console(s)
    [40905.910000] musb_suspend 2197: suspend from 0 -> 2
    [40905.910000] musb_suspend 2231: idle, standby etc.
    [40905.910000] twl4030_phy_suspend: irq_disable=1
    [40905.910000] twl4030_phy_suspend: phy is already asleep
    [40905.920000] rtc_alarm: Read current rtc alarm of 04:21:27
    [40905.920000] fastpath_prepare: RTC = 04:16:43, UserAlarm = 04:21:27, NextFastWake = 04:22:09
    [40905.920000] fastpath_prepare: Alarm set after 326 seconds by fastpath client : Battery Check Fastpath Client
    [40905.920000] 00042549.884: enter suspend
    [40905.920000] 00042833.875: leave suspend
    [40905.920000] WAKEUP STATE/REASON
    [40905.920000] PM_WKST_WKUP      00000108
    [40905.920000] rtc_alarm: Read current rtc alarm of 04:21:27
    [40905.920000] fastpath_fastsleep: RTC Wakeup for User Alarm
    [40905.930000] twl4030_phy_resume: mode=1
    [40905.930000] musb_softconn: on
    [40905.930000] twl4030_phy_suspend: irq_disable=0
    [40905.940000] phy_suspend: enter
    [40905.940000] musb_softconn: off
    [40906.020000] Restarting tasks ... <6>timechange: time was changed.
    [40906.050000] done.
    [40911.660000] Syncing filesystems ... skipped for target platform ... done.
    [40911.660000] Freezing user space processes ... (elapsed 0.00 seconds) done.
    [40911.670000] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
    [40911.670000] Suspending console(s)
    [40911.970000] musb_suspend 2197: suspend from 0 -> 2
    [40911.970000] musb_suspend 2231: idle, standby etc.
    [40911.970000] twl4030_phy_suspend: irq_disable=1
    [40911.970000] twl4030_phy_suspend: phy is already asleep
    [40911.980000] rtc_alarm: Read current rtc alarm of 04:24:17
    [40911.980000] fastpath_prepare: RTC = 04:21:33, UserAlarm = 04:24:17, NextFastWake = 04:22:09
    [40911.980000] fastpath_prepare: Alarm set after 36 seconds by fastpath client : Battery Check Fastpath Client
    [40911.980000] 00042839.936: enter suspend
    [40911.980000] 00042875.875: leave suspend
    [40911.980000] WAKEUP STATE/REASON
    [40911.980000] PM_WKST_WKUP      00000108
    [40911.980000] rtc_alarm: Read current rtc alarm of 04:22:09
    [40911.980000] fastpath_fastsleep: RTC Wakeup for Fastpath client : Battery Check Fastpath Client
    [40912.020000] 00042875.918: enter suspend
    [40912.020000] 00043003.875: leave suspend
    [40912.020000] WAKEUP STATE/REASON
    [40912.020000] PM_WKST_WKUP      00000108
    [40912.020000] rtc_alarm: Read current rtc alarm of 04:24:17
    [40912.020000] fastpath_fastsleep: RTC Wakeup for User Alarm
    [40912.030000] twl4030_phy_resume: mode=1
    [40912.030000] musb_softconn: on
    [40912.040000] twl4030_phy_suspend: irq_disable=0
    [40912.040000] phy_suspend: enter
    [40912.040000] musb_softconn: off
    [40912.100000] Restarting tasks ... <6>timechange: time was changed.
    [40912.170000] done.
    [40917.800000] Syncing filesystems ... skipped for target platform ... done.
    [40917.800000] Freezing user space processes ... (elapsed 0.00 seconds) done.
    [40917.810000] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
    [40917.810000] Suspending console(s)
    [40918.060000] musb_suspend 2197: suspend from 0 -> 2
    [40918.060000] musb_suspend 2231: idle, standby etc.
    [40918.060000] twl4030_phy_suspend: irq_disable=1
    [40918.060000] twl4030_phy_suspend: phy is already asleep
    [40918.070000] rtc_alarm: Read current rtc alarm of 04:41:32
    [40918.070000] fastpath_prepare: RTC = 04:24:23, UserAlarm = 04:41:32, NextFastWake = 04:32:09
    [40918.070000] fastpath_prepare: Alarm set after 466 seconds by fastpath client : Battery Check Fastpath Client
    [40918.070000] 00043009.924: enter suspend
    [40918.070000] 00043475.875: leave suspend
    [40918.070000] WAKEUP STATE/REASON
    [40918.070000] PM_WKST_WKUP      00000108
    [40918.070000] rtc_alarm: Read current rtc alarm of 04:32:09
    [40918.070000] fastpath_fastsleep: RTC Wakeup for Fastpath client : Battery Check Fastpath Client
    [40918.110000] 00043475.917: enter suspend
    [40918.110000] 00044027.627: leave suspend
    [40918.110000] WAKEUP STATE/REASON
    [40918.110000] PM_WKST_WKUP      00000100
    [40918.110000] fastpath_fastsleep: Non RTC Wakeup
    [40918.110000] twl4030_phy_resume: mode=1
    [40918.120000] musb_softconn: on
    [40918.120000] twl4030_phy_suspend: irq_disable=0
    [40918.120000] phy_suspend: enter
    [40918.120000] musb_softconn: off
    [40918.170000] Restarting tasks ... <6>timechange: time was changed.
    [40918.240000] done.
    [40919.870000] timechange: time was changed.
    [40923.710000] Syncing filesystems ... skipped for target platform ... done.
    [40923.710000] Freezing user space processes ... (elapsed 0.00 seconds) done.
    [40923.710000] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
    [40923.710000] Suspending console(s)
    [40924.430000] musb_suspend 2197: suspend from 0 -> 2
    [40924.430000] musb_suspend 2231: idle, standby etc.
    [40924.430000] twl4030_phy_suspend: irq_disable=1
    [40924.430000] twl4030_phy_suspend: phy is already asleep
    [40924.440000] rtc_alarm: Read current rtc alarm of 04:41:31
    [40924.440000] fastpath_prepare: RTC = 04:41:27, UserAlarm = 04:41:31, NextFastWake = 04:42:09
    [40924.440000] fastpath_prepare: Alarm set after 42 seconds by fastpath client : Battery Check Fastpath Client
    [40924.440000] 00044033.959: enter suspend
    [40924.440000] 00044037.875: leave suspend
    [40924.440000] WAKEUP STATE/REASON
    [40924.440000] PM_WKST_WKUP      00000108
    [40924.440000] rtc_alarm: Read current rtc alarm of 04:41:31
    [40924.440000] fastpath_fastsleep: RTC Wakeup for User Alarm
    [40924.450000] twl4030_phy_resume: mode=1
    [40924.450000] musb_softconn: on
    [40924.460000] twl4030_phy_suspend: irq_disable=0
    [40924.460000] phy_suspend: enter
    [40924.460000] musb_softconn: off
    [40924.510000] Restarting tasks ... <6>timechange: time was changed.
    [40924.600000] done.
    [40933.090000] Syncing filesystems ... skipped for target platform ... done.
    [40933.090000] Freezing user space processes ... (elapsed 0.01 seconds) done.
    [40933.100000] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
    [40933.100000] Suspending console(s)
    [40933.400000] musb_suspend 2197: suspend from 0 -> 2
    [40933.400000] musb_suspend 2231: idle, standby etc.
    [40933.400000] twl4030_phy_suspend: irq_disable=1
    [40933.400000] twl4030_phy_suspend: phy is already asleep
    [40933.410000] rtc_alarm: Read current rtc alarm of 04:49:17
    [40933.410000] fastpath_prepare: RTC = 04:41:40, UserAlarm = 04:49:17, NextFastWake = 04:42:09
    [40933.410000] fastpath_prepare: Alarm set after 29 seconds by fastpath client : Battery Check Fastpath Client
    [40933.410000] 00044046.844: enter suspend
    [40933.410000] 00044075.875: leave suspend
    [40933.410000] WAKEUP STATE/REASON
    [40933.410000] PM_WKST_WKUP      00000108
    [40933.410000] rtc_alarm: Read current rtc alarm of 04:42:09
    [40933.410000] fastpath_fastsleep: RTC Wakeup for Fastpath client : Battery Check Fastpath Client
    [40933.450000] 00044075.918: enter suspend
    [40933.450000] 00044503.875: leave suspend
    [40933.450000] WAKEUP STATE/REASON
    [40933.450000] PM_WKST_WKUP      00000108
    [40933.450000] rtc_alarm: Read current rtc alarm of 04:49:17
    [40933.450000] fastpath_fastsleep: RTC Wakeup for User Alarm
    [40933.460000] twl4030_phy_resume: mode=1
    [40933.460000] musb_softconn: on
    [40933.470000] twl4030_phy_suspend: irq_disable=0
    [40933.470000] phy_suspend: enter
    [40933.470000] musb_softconn: off
    [40933.520000] Restarting tasks ... <6>timechange: time was changed.
    [40933.590000] done.
    [40939.210000] Syncing filesystems ... skipped for target platform ... done.
    [40939.210000] Freezing user space processes ... (elapsed 0.00 seconds) done.
    [40939.210000] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
    [40939.210000] Suspending console(s)
    [40939.460000] musb_suspend 2197: suspend from 0 -> 2
    [40939.460000] musb_suspend 2231: idle, standby etc.
    [40939.460000] twl4030_phy_suspend: irq_disable=1
    [40939.460000] twl4030_phy_suspend: phy is already asleep
    [40939.470000] rtc_alarm: Read current rtc alarm of 05:01:38
    [40939.470000] fastpath_prepare: RTC = 04:49:23, UserAlarm = 05:01:38, NextFastWake = 04:52:09
    [40939.470000] fastpath_prepare: Alarm set after 166 seconds by fastpath client : Battery Check Fastpath Client
    [40939.470000] 00044509.894: enter suspend
    [40939.470000] 00044675.875: leave suspend
    [40939.470000] WAKEUP STATE/REASON
    [40939.470000] PM_WKST_WKUP      00000108
    [40939.470000] rtc_alarm: Read current rtc alarm of 04:52:09
    [40939.470000] fastpath_fastsleep: RTC Wakeup for Fastpath client : Battery Check Fastpath Client
    [40939.510000] 00044675.917: enter suspend
    [40939.510000] 00045068.410: leave suspend
    [40939.510000] WAKEUP STATE/REASON
    [40939.510000] PM_WKST_WKUP      00000108
    [40939.510000] fastpath_fastsleep: Non RTC Wakeup
    [40939.510000] twl4030_phy_resume: mode=1
    [40939.520000] musb_softconn: on
    [40939.520000] twl4030_phy_suspend: irq_disable=0
    [40939.520000] phy_suspend: enter
    [40939.520000] musb_softconn: off
    [40939.570000] Restarting tasks ... <6>timechange: time was changed.
    [40939.640000] done.
    [40940.090000] timechange: time was changed.
    [40970.320000] twl4030_phy_resume: mode=1
    [40970.320000] musb_softconn: on
    [40970.320000] charger_detector: schudule detection
    [40970.380000] musb_stage2_irq 813: SUSPEND (b_idle) devctl 99 power e0
    [40970.610000] musb_stage0_irq 661: BUS RESET as b_idle
    [40970.620000] gadget_event: source=bus mA=100
    [40970.790000] musb_stage0_irq 661: BUS RESET as b_peripheral
    [40970.810000] gadget_event: source=bus mA=100 (no change)
    [40971.050000] g_rockhopper gadget: high speed config #2: ROCKHOPPER
    [40971.050000] musb_hdrc periph: enabled ep2in for bulk IN, dma, maxpacket 512
    [40971.050000] musb_hdrc periph: enabled ep2out for bulk OUT, dma, maxpacket 512
    [40971.050000] musb_hdrc periph: enabled ep1in for bulk IN, dma, maxpacket 512
    [40971.050000] musb_hdrc periph: enabled ep1out for bulk OUT, dma, maxpacket 512
    [40971.050000] g_rockhopper gadget: mass_storage ready
    [40971.050000] charger_detector: cancel detection
    [40971.330000] charger_detector: pullup not detected (> 510ms)
    [40971.330000] gadget_event: host_connected=1
    [40971.330000] gadget_event: source=bus mA=500
    [40972.220000] twl4030_audio_audio_resume: resuming codec
    [40972.220000] CODEC ref count = 1
    [40977.620000] twl4030_audio_audio_suspend: suspending codec
    [40977.620000] CODEC ref count = 0
    [40980.500000] Timeout in prcm_check_power_domain_status(), domain 9, desired state 1, current state 3
    [41131.330000] timechange: time was changed.
    [41132.900000] Timeout in prcm_check_power_domain_status(), domain 9, desired state 1, current state 3
    [41143.000000] twl4030_audio_audio_resume: resuming codec
    [41143.000000] CODEC ref count = 1
    [41143.090000] CODEC ref count = 2
    [41143.440000] CODEC ref count = 1
    [41149.030000] twl4030_audio_audio_suspend: suspending codec
    [41149.030000] CODEC ref count = 0
    [41169.770000] Timeout in prcm_check_power_domain_status(), domain 9, desired state 1, current state 3
    and then dmesg after opening VZ Nav and getting a lock:

    Code:
    = 0
    [40681.720000] twl4030_audio_audio_resume: resuming codec
    [40681.720000] CODEC ref count = 1
    [40683.350000] Timeout in prcm_check_power_domain_status(), domain 9, desired state 1, current state 3
    [40691.510000] timechange: time was changed.
    [40776.770000] timechange: time was changed.
    [40779.780000] twl4030_audio_audio_suspend: suspending codec
    [40779.790000] CODEC ref count = 0
    [40783.850000] mdm_act:    4048385: modem wakeup timeout
    [40900.510000] Syncing filesystems ... skipped for target platform ... done.
    [40900.510000] Freezing user space processes ... (elapsed 0.00 seconds) done.
    [40900.520000] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
    [40900.520000] Suspending console(s)
    [40900.810000] musb_suspend 2197: suspend from 0 -> 2
    [40900.810000] musb_suspend 2231: idle, standby etc.
    [40900.810000] twl4030_phy_suspend: irq_disable=1
    [40900.810000] twl4030_phy_suspend: phy is already asleep
    [40900.850000] rtc_alarm: Read current rtc alarm of 04:21:26
    [40900.850000] fastpath_prepare: RTC = 04:12:09, UserAlarm = 04:21:26, NextFastWake = 04:12:24
    [40900.850000] fastpath_prepare: Alarm set after 15 seconds by fastpath client : TCP Fastpath Client
    [40900.850000] 00042276.230: enter suspend
    [40900.850000] 00042276.698: leave suspend
    [40900.850000] WAKEUP STATE/REASON
    [40900.850000] PM_WKST_WKUP      00000100
    [40900.850000] fastpath_fastsleep: Non RTC Wakeup
    [40900.850000] twl4030_phy_resume: mode=1
    [40900.860000] musb_softconn: on
    [40900.860000] twl4030_phy_suspend: irq_disable=0
    [40900.860000] phy_suspend: enter
    [40900.860000] musb_softconn: off
    [40900.910000] Restarting tasks ... done.
    [40902.100000] Syncing filesystems ... skipped for target platform ... done.
    [40902.100000] Freezing user space processes ... (elapsed 0.00 seconds) done.
    [40902.110000] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
    [40902.110000] Suspending console(s)
    [40902.410000] musb_suspend 2197: suspend from 0 -> 2
    [40902.410000] musb_suspend 2231: idle, standby etc.
    [40902.410000] twl4030_phy_suspend: irq_disable=1
    [40902.410000] twl4030_phy_suspend: phy is already asleep
    [40902.420000] rtc_alarm: Read current rtc alarm of 04:21:27
    [40902.420000] fastpath_prepare: RTC = 04:12:11, UserAlarm = 04:21:27, NextFastWake = 04:22:09
    [40902.420000] fastpath_prepare: Alarm set after 598 seconds by fastpath client : Battery Check Fastpath Client
    [40902.420000] 00042278.269: enter suspend
    [40902.420000] 00042546.383: leave suspend
    [40902.420000] WAKEUP STATE/REASON
    [40902.420000] PM_WKST_WKUP      00000108
    [40902.420000] fastpath_fastsleep: Non RTC Wakeup
    [40902.420000] twl4030_phy_resume: mode=1
    [40902.430000] musb_softconn: on
    [40902.430000] twl4030_phy_suspend: irq_disable=0
    [40902.430000] phy_suspend: enter
    [40902.430000] musb_softconn: off
    [40902.480000] Restarting tasks ... <6>timechange: time was changed.
    [40902.540000] done.
    [40903.000000] timechange: time was changed.
    [40905.600000] Syncing filesystems ... skipped for target platform ... done.
    [40905.610000] Freezing user space processes ... (elapsed 0.00 seconds) done.
    [40905.610000] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
    [40905.610000] Suspending console(s)
    [40905.910000] musb_suspend 2197: suspend from 0 -> 2
    [40905.910000] musb_suspend 2231: idle, standby etc.
    [40905.910000] twl4030_phy_suspend: irq_disable=1
    [40905.910000] twl4030_phy_suspend: phy is already asleep
    [40905.920000] rtc_alarm: Read current rtc alarm of 04:21:27
    [40905.920000] fastpath_prepare: RTC = 04:16:43, UserAlarm = 04:21:27, NextFastWake = 04:22:09
    [40905.920000] fastpath_prepare: Alarm set after 326 seconds by fastpath client : Battery Check Fastpath Client
    [40905.920000] 00042549.884: enter suspend
    [40905.920000] 00042833.875: leave suspend
    [40905.920000] WAKEUP STATE/REASON
    [40905.920000] PM_WKST_WKUP      00000108
    [40905.920000] rtc_alarm: Read current rtc alarm of 04:21:27
    [40905.920000] fastpath_fastsleep: RTC Wakeup for User Alarm
    [40905.930000] twl4030_phy_resume: mode=1
    [40905.930000] musb_softconn: on
    [40905.930000] twl4030_phy_suspend: irq_disable=0
    [40905.940000] phy_suspend: enter
    [40905.940000] musb_softconn: off
    [40906.020000] Restarting tasks ... <6>timechange: time was changed.
    [40906.050000] done.
    [40911.660000] Syncing filesystems ... skipped for target platform ... done.
    [40911.660000] Freezing user space processes ... (elapsed 0.00 seconds) done.
    [40911.670000] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
    [40911.670000] Suspending console(s)
    [40911.970000] musb_suspend 2197: suspend from 0 -> 2
    [40911.970000] musb_suspend 2231: idle, standby etc.
    [40911.970000] twl4030_phy_suspend: irq_disable=1
    [40911.970000] twl4030_phy_suspend: phy is already asleep
    [40911.980000] rtc_alarm: Read current rtc alarm of 04:24:17
    [40911.980000] fastpath_prepare: RTC = 04:21:33, UserAlarm = 04:24:17, NextFastWake = 04:22:09
    [40911.980000] fastpath_prepare: Alarm set after 36 seconds by fastpath client : Battery Check Fastpath Client
    [40911.980000] 00042839.936: enter suspend
    [40911.980000] 00042875.875: leave suspend
    [40911.980000] WAKEUP STATE/REASON
    [40911.980000] PM_WKST_WKUP      00000108
    [40911.980000] rtc_alarm: Read current rtc alarm of 04:22:09
    [40911.980000] fastpath_fastsleep: RTC Wakeup for Fastpath client : Battery Check Fastpath Client
    [40912.020000] 00042875.918: enter suspend
    [40912.020000] 00043003.875: leave suspend
    [40912.020000] WAKEUP STATE/REASON
    [40912.020000] PM_WKST_WKUP      00000108
    [40912.020000] rtc_alarm: Read current rtc alarm of 04:24:17
    [40912.020000] fastpath_fastsleep: RTC Wakeup for User Alarm
    [40912.030000] twl4030_phy_resume: mode=1
    [40912.030000] musb_softconn: on
    [40912.040000] twl4030_phy_suspend: irq_disable=0
    [40912.040000] phy_suspend: enter
    [40912.040000] musb_softconn: off
    [40912.100000] Restarting tasks ... <6>timechange: time was changed.
    [40912.170000] done.
    [40917.800000] Syncing filesystems ... skipped for target platform ... done.
    [40917.800000] Freezing user space processes ... (elapsed 0.00 seconds) done.
    [40917.810000] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
    [40917.810000] Suspending console(s)
    [40918.060000] musb_suspend 2197: suspend from 0 -> 2
    [40918.060000] musb_suspend 2231: idle, standby etc.
    [40918.060000] twl4030_phy_suspend: irq_disable=1
    [40918.060000] twl4030_phy_suspend: phy is already asleep
    [40918.070000] rtc_alarm: Read current rtc alarm of 04:41:32
    [40918.070000] fastpath_prepare: RTC = 04:24:23, UserAlarm = 04:41:32, NextFastWake = 04:32:09
    [40918.070000] fastpath_prepare: Alarm set after 466 seconds by fastpath client : Battery Check Fastpath Client
    [40918.070000] 00043009.924: enter suspend
    [40918.070000] 00043475.875: leave suspend
    [40918.070000] WAKEUP STATE/REASON
    [40918.070000] PM_WKST_WKUP      00000108
    [40918.070000] rtc_alarm: Read current rtc alarm of 04:32:09
    [40918.070000] fastpath_fastsleep: RTC Wakeup for Fastpath client : Battery Check Fastpath Client
    [40918.110000] 00043475.917: enter suspend
    [40918.110000] 00044027.627: leave suspend
    [40918.110000] WAKEUP STATE/REASON
    [40918.110000] PM_WKST_WKUP      00000100
    [40918.110000] fastpath_fastsleep: Non RTC Wakeup
    [40918.110000] twl4030_phy_resume: mode=1
    [40918.120000] musb_softconn: on
    [40918.120000] twl4030_phy_suspend: irq_disable=0
    [40918.120000] phy_suspend: enter
    [40918.120000] musb_softconn: off
    [40918.170000] Restarting tasks ... <6>timechange: time was changed.
    [40918.240000] done.
    [40919.870000] timechange: time was changed.
    [40923.710000] Syncing filesystems ... skipped for target platform ... done.
    [40923.710000] Freezing user space processes ... (elapsed 0.00 seconds) done.
    [40923.710000] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
    [40923.710000] Suspending console(s)
    [40924.430000] musb_suspend 2197: suspend from 0 -> 2
    [40924.430000] musb_suspend 2231: idle, standby etc.
    [40924.430000] twl4030_phy_suspend: irq_disable=1
    [40924.430000] twl4030_phy_suspend: phy is already asleep
    [40924.440000] rtc_alarm: Read current rtc alarm of 04:41:31
    [40924.440000] fastpath_prepare: RTC = 04:41:27, UserAlarm = 04:41:31, NextFastWake = 04:42:09
    [40924.440000] fastpath_prepare: Alarm set after 42 seconds by fastpath client : Battery Check Fastpath Client
    [40924.440000] 00044033.959: enter suspend
    [40924.440000] 00044037.875: leave suspend
    [40924.440000] WAKEUP STATE/REASON
    [40924.440000] PM_WKST_WKUP      00000108
    [40924.440000] rtc_alarm: Read current rtc alarm of 04:41:31
    [40924.440000] fastpath_fastsleep: RTC Wakeup for User Alarm
    [40924.450000] twl4030_phy_resume: mode=1
    [40924.450000] musb_softconn: on
    [40924.460000] twl4030_phy_suspend: irq_disable=0
    [40924.460000] phy_suspend: enter
    [40924.460000] musb_softconn: off
    [40924.510000] Restarting tasks ... <6>timechange: time was changed.
    [40924.600000] done.
    [40933.090000] Syncing filesystems ... skipped for target platform ... done.
    [40933.090000] Freezing user space processes ... (elapsed 0.01 seconds) done.
    [40933.100000] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
    [40933.100000] Suspending console(s)
    [40933.400000] musb_suspend 2197: suspend from 0 -> 2
    [40933.400000] musb_suspend 2231: idle, standby etc.
    [40933.400000] twl4030_phy_suspend: irq_disable=1
    [40933.400000] twl4030_phy_suspend: phy is already asleep
    [40933.410000] rtc_alarm: Read current rtc alarm of 04:49:17
    [40933.410000] fastpath_prepare: RTC = 04:41:40, UserAlarm = 04:49:17, NextFastWake = 04:42:09
    [40933.410000] fastpath_prepare: Alarm set after 29 seconds by fastpath client : Battery Check Fastpath Client
    [40933.410000] 00044046.844: enter suspend
    [40933.410000] 00044075.875: leave suspend
    [40933.410000] WAKEUP STATE/REASON
    [40933.410000] PM_WKST_WKUP      00000108
    [40933.410000] rtc_alarm: Read current rtc alarm of 04:42:09
    [40933.410000] fastpath_fastsleep: RTC Wakeup for Fastpath client : Battery Check Fastpath Client
    [40933.450000] 00044075.918: enter suspend
    [40933.450000] 00044503.875: leave suspend
    [40933.450000] WAKEUP STATE/REASON
    [40933.450000] PM_WKST_WKUP      00000108
    [40933.450000] rtc_alarm: Read current rtc alarm of 04:49:17
    [40933.450000] fastpath_fastsleep: RTC Wakeup for User Alarm
    [40933.460000] twl4030_phy_resume: mode=1
    [40933.460000] musb_softconn: on
    [40933.470000] twl4030_phy_suspend: irq_disable=0
    [40933.470000] phy_suspend: enter
    [40933.470000] musb_softconn: off
    [40933.520000] Restarting tasks ... <6>timechange: time was changed.
    [40933.590000] done.
    [40939.210000] Syncing filesystems ... skipped for target platform ... done.
    [40939.210000] Freezing user space processes ... (elapsed 0.00 seconds) done.
    [40939.210000] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
    [40939.210000] Suspending console(s)
    [40939.460000] musb_suspend 2197: suspend from 0 -> 2
    [40939.460000] musb_suspend 2231: idle, standby etc.
    [40939.460000] twl4030_phy_suspend: irq_disable=1
    [40939.460000] twl4030_phy_suspend: phy is already asleep
    [40939.470000] rtc_alarm: Read current rtc alarm of 05:01:38
    [40939.470000] fastpath_prepare: RTC = 04:49:23, UserAlarm = 05:01:38, NextFastWake = 04:52:09
    [40939.470000] fastpath_prepare: Alarm set after 166 seconds by fastpath client : Battery Check Fastpath Client
    [40939.470000] 00044509.894: enter suspend
    [40939.470000] 00044675.875: leave suspend
    [40939.470000] WAKEUP STATE/REASON
    [40939.470000] PM_WKST_WKUP      00000108
    [40939.470000] rtc_alarm: Read current rtc alarm of 04:52:09
    [40939.470000] fastpath_fastsleep: RTC Wakeup for Fastpath client : Battery Check Fastpath Client
    [40939.510000] 00044675.917: enter suspend
    [40939.510000] 00045068.410: leave suspend
    [40939.510000] WAKEUP STATE/REASON
    [40939.510000] PM_WKST_WKUP      00000108
    [40939.510000] fastpath_fastsleep: Non RTC Wakeup
    [40939.510000] twl4030_phy_resume: mode=1
    [40939.520000] musb_softconn: on
    [40939.520000] twl4030_phy_suspend: irq_disable=0
    [40939.520000] phy_suspend: enter
    [40939.520000] musb_softconn: off
    [40939.570000] Restarting tasks ... <6>timechange: time was changed.
    [40939.640000] done.
    [40940.090000] timechange: time was changed.
    [40970.320000] twl4030_phy_resume: mode=1
    [40970.320000] musb_softconn: on
    [40970.320000] charger_detector: schudule detection
    [40970.380000] musb_stage2_irq 813: SUSPEND (b_idle) devctl 99 power e0
    [40970.610000] musb_stage0_irq 661: BUS RESET as b_idle
    [40970.620000] gadget_event: source=bus mA=100
    [40970.790000] musb_stage0_irq 661: BUS RESET as b_peripheral
    [40970.810000] gadget_event: source=bus mA=100 (no change)
    [40971.050000] g_rockhopper gadget: high speed config #2: ROCKHOPPER
    [40971.050000] musb_hdrc periph: enabled ep2in for bulk IN, dma, maxpacket 512
    [40971.050000] musb_hdrc periph: enabled ep2out for bulk OUT, dma, maxpacket 512
    [40971.050000] musb_hdrc periph: enabled ep1in for bulk IN, dma, maxpacket 512
    [40971.050000] musb_hdrc periph: enabled ep1out for bulk OUT, dma, maxpacket 512
    [40971.050000] g_rockhopper gadget: mass_storage ready
    [40971.050000] charger_detector: cancel detection
    [40971.330000] charger_detector: pullup not detected (> 510ms)
    [40971.330000] gadget_event: host_connected=1
    [40971.330000] gadget_event: source=bus mA=500
    [40972.220000] twl4030_audio_audio_resume: resuming codec
    [40972.220000] CODEC ref count = 1
    [40977.620000] twl4030_audio_audio_suspend: suspending codec
    [40977.620000] CODEC ref count = 0
    [40980.500000] Timeout in prcm_check_power_domain_status(), domain 9, desired state 1, current state 3
    [41131.330000] timechange: time was changed.
    [41132.900000] Timeout in prcm_check_power_domain_status(), domain 9, desired state 1, current state 3
    [41143.000000] twl4030_audio_audio_resume: resuming codec
    [41143.000000] CODEC ref count = 1
    [41143.090000] CODEC ref count = 2
    [41143.440000] CODEC ref count = 1
    [41149.030000] twl4030_audio_audio_suspend: suspending codec
    [41149.030000] CODEC ref count = 0
    [41169.770000] Timeout in prcm_check_power_domain_status(), domain 9, desired state 1, current state 3
    [41187.640000] twl4030_audio_audio_resume: resuming codec
    [41187.640000] CODEC ref count = 1
    [41193.060000] twl4030_audio_audio_suspend: suspending codec
    [41193.060000] CODEC ref count = 0
    [41194.250000] Timeout in prcm_check_power_domain_status(), domain 9, desired state 1, current state 3
    [41197.930000] cdc_acm 1-1:1.0: connection speed change: 262144 bps up, 0 bps down
    [41197.960000] cdc_acm 1-1:1.0: input control lines: dcd- dsr+ break- ring- framing- parity- overrun-
    [41197.960000] cdc_acm 1-1:1.0: DCD dropped. calling tty_hangup
    [41198.000000] cdc_acm 1-1:1.0: connection speed change: 262144 bps up, 262144 bps down
    [41198.920000] cdc_acm 1-1:1.0: input control lines: dcd+ dsr+ break- ring- framing- parity- overrun-
    [41199.040000] acm_tty_close:
    [41199.040000] cdc_acm 1-1:1.0: set control lines: dtr- rts-
    [41201.390000] gadget_event: media_loaded=1
    [41201.730000] mdm_act:    4090173: modem wakeup timeout
    [41397.410000] FSG: Eject Media (immed=0)
    [41397.450000] gadget_event: media_loaded=0
    [41399.720000] timechange: time was changed.
    [41399.840000] cdc_acm 1-1:1.0: set control lines: dtr+ rts+
    [41399.850000] cdc_acm 1-1:1.0: set control lines: dtr- rts+
    [41399.860000] cdc_acm 1-1:1.0: set control lines: dtr+ rts+
    [41618.720000] timechange: time was changed.
    [41638.180000] twl4030_audio_audio_resume: resuming codec
    [41638.180000] CODEC ref count = 1
    [41638.220000] CODEC ref count = 2
    [41638.570000] CODEC ref count = 1
    [41644.210000] twl4030_audio_audio_suspend: suspending codec
    [41644.210000] CODEC ref count = 0

    diff from before any GPS activity to first google attempt with no lock:

    Code:
    @@ -1,16 +1,4 @@
    -0100
    -[40655.760000] fastpath_fastsleep: Non RTC Wakeup
    -[40655.760000] twl4030_phy_resume: mode=1
    -[40655.770000] musb_softconn: on
    -[40655.770000] twl4030_phy_suspend: irq_disable=0
    -[40655.770000] phy_suspend: enter
    -[40655.770000] musb_softconn: off
    -[40655.820000] Restarting tasks ... <6>timechange: time was changed.
    -[40655.970000] done.
    -[40657.070000] twl4030_audio_audio_resume: resuming codec
    -[40657.070000] CODEC ref count = 1
    -[40657.400000] timechange: time was changed.
    -[40657.680000] CODEC ref count = 2
    +count = 2
     [40657.750000] DSPBRIDGE: SHM Alloc from USER MEM, shm_size = 0x5b5000phys_mempool_base = 0x9f900000, phys_mempool_size = 0x600000
     [40657.750000] DSPBRIDGE: PROC_Stop SUCCESS, proc state = 0x0
     [40657.750000] DSPBRIDGE: DSP/BIOS Bridge driver loaded SUCCESS
    @@ -283,3 +271,12 @@
     [40977.620000] twl4030_audio_audio_suspend: suspending codec
     [40977.620000] CODEC ref count = 0
     [40980.500000] Timeout in prcm_check_power_domain_status(), domain 9, desired state 1, current state 3
    +[41131.330000] timechange: time was changed.
    +[41132.900000] Timeout in prcm_check_power_domain_status(), domain 9, desired state 1, current state 3
    +[41143.000000] twl4030_audio_audio_resume: resuming codec
    +[41143.000000] CODEC ref count = 1
    +[41143.090000] CODEC ref count = 2
    +[41143.440000] CODEC ref count = 1
    +[41149.030000] twl4030_audio_audio_suspend: suspending codec
    +[41149.030000] CODEC ref count = 0
    +[41169.770000] Timeout in prcm_check_power_domain_status(), domain 9, desired state 1, current state 3

    diff from before any GPS activity to lock with VZ Nav and Google Maps showing it:

    Code:
    @@ -1,43 +1,4 @@
    -0100
    -[40655.760000] fastpath_fastsleep: Non RTC Wakeup
    -[40655.760000] twl4030_phy_resume: mode=1
    -[40655.770000] musb_softconn: on
    -[40655.770000] twl4030_phy_suspend: irq_disable=0
    -[40655.770000] phy_suspend: enter
    -[40655.770000] musb_softconn: off
    -[40655.820000] Restarting tasks ... <6>timechange: time was changed.
    -[40655.970000] done.
    -[40657.070000] twl4030_audio_audio_resume: resuming codec
    -[40657.070000] CODEC ref count = 1
    -[40657.400000] timechange: time was changed.
    -[40657.680000] CODEC ref count = 2
    -[40657.750000] DSPBRIDGE: SHM Alloc from USER MEM, shm_size = 0x5b5000phys_mempool_base = 0x9f900000, phys_mempool_size = 0x600000
    -[40657.750000] DSPBRIDGE: PROC_Stop SUCCESS, proc state = 0x0
    -[40657.750000] DSPBRIDGE: DSP/BIOS Bridge driver loaded SUCCESS
    -[40657.760000] Vibetonz: New data value timed out!
    -[40657.760000] CODEC ref count = 1
    -[40657.760000] CODEC ref count = 2
    -[40658.090000] CODEC ref count = 1
    -[40658.960000] DSPBRIDGE: PROC_Stop SUCCESS, proc state = 0x0
    -[40658.960000] DSPBRIDGE: PROC_Stop SUCCESS, proc state = 0x0
    -[40658.980000] DSPBRIDGE: PROC_Load SUCCESS, proc state = 0x1
    -[40658.990000] DSPBRIDGE: PROC_Start SUCCESS, proc state = 0x2
    -[40662.140000] twl4030_audio_audio_suspend: suspending codec
    -[40662.140000] CODEC ref count = 0
    -[40662.430000] Syncing filesystems ... skipped for target platform ... done.
    -[40662.430000] Freezing user space processes ... (elapsed 0.00 seconds) done.
    -[40662.440000] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
    -[40662.440000] Suspending console(s)
    -[40662.680000] suspend_device(): platform_suspend+0x0/0x34() returns -16
    -[40662.680000] Could not suspend device gpio-keys: error -16
    -[40662.730000] Some devices failed to suspend
    -[40662.730000] Restarting tasks ... done.
    -[40663.150000] timechange: time was changed.
    -[40666.200000] twl4030_audio_audio_resume: resuming codec
    -[40666.200000] CODEC ref count = 1
    -[40667.760000] Waited 5 ms for DSP hibernation
    -[40671.600000] twl4030_audio_audio_suspend: suspending codec
    -[40671.600000] CODEC ref count = 0
    + = 0
     [40681.720000] twl4030_audio_audio_resume: resuming codec
     [40681.720000] CODEC ref count = 1
     [40683.350000] Timeout in prcm_check_power_domain_status(), domain 9, desired state 1, current state 3
    @@ -283,3 +244,39 @@
     [40977.620000] twl4030_audio_audio_suspend: suspending codec
     [40977.620000] CODEC ref count = 0
     [40980.500000] Timeout in prcm_check_power_domain_status(), domain 9, desired state 1, current state 3
    +[41131.330000] timechange: time was changed.
    +[41132.900000] Timeout in prcm_check_power_domain_status(), domain 9, desired state 1, current state 3
    +[41143.000000] twl4030_audio_audio_resume: resuming codec
    +[41143.000000] CODEC ref count = 1
    +[41143.090000] CODEC ref count = 2
    +[41143.440000] CODEC ref count = 1
    +[41149.030000] twl4030_audio_audio_suspend: suspending codec
    +[41149.030000] CODEC ref count = 0
    +[41169.770000] Timeout in prcm_check_power_domain_status(), domain 9, desired state 1, current state 3
    +[41187.640000] twl4030_audio_audio_resume: resuming codec
    +[41187.640000] CODEC ref count = 1
    +[41193.060000] twl4030_audio_audio_suspend: suspending codec
    +[41193.060000] CODEC ref count = 0
    +[41194.250000] Timeout in prcm_check_power_domain_status(), domain 9, desired state 1, current state 3
    +[41197.930000] cdc_acm 1-1:1.0: connection speed change: 262144 bps up, 0 bps down
    +[41197.960000] cdc_acm 1-1:1.0: input control lines: dcd- dsr+ break- ring- framing- parity- overrun-
    +[41197.960000] cdc_acm 1-1:1.0: DCD dropped. calling tty_hangup
    +[41198.000000] cdc_acm 1-1:1.0: connection speed change: 262144 bps up, 262144 bps down
    +[41198.920000] cdc_acm 1-1:1.0: input control lines: dcd+ dsr+ break- ring- framing- parity- overrun-
    +[41199.040000] acm_tty_close:
    +[41199.040000] cdc_acm 1-1:1.0: set control lines: dtr- rts-
    +[41201.390000] gadget_event: media_loaded=1
    +[41201.730000] mdm_act:    4090173: modem wakeup timeout
    +[41397.410000] FSG: Eject Media (immed=0)
    +[41397.450000] gadget_event: media_loaded=0
    +[41399.720000] timechange: time was changed.
    +[41399.840000] cdc_acm 1-1:1.0: set control lines: dtr+ rts+
    +[41399.850000] cdc_acm 1-1:1.0: set control lines: dtr- rts+
    +[41399.860000] cdc_acm 1-1:1.0: set control lines: dtr+ rts+
    +[41618.720000] timechange: time was changed.
    +[41638.180000] twl4030_audio_audio_resume: resuming codec
    +[41638.180000] CODEC ref count = 1
    +[41638.220000] CODEC ref count = 2
    +[41638.570000] CODEC ref count = 1
    +[41644.210000] twl4030_audio_audio_suspend: suspending codec
    +[41644.210000] CODEC ref count = 0
Page 2 of 5 FirstFirst 12345 LastLast

Tags for this Thread

Posting Permissions