Page 8 of 12 FirstFirst ... 3456789101112 LastLast
Results 141 to 160 of 237
  1. #141  
    Quote Originally Posted by Port-Steve View Post
    Goldau Im not sure if this is what your looking for, if not can you send a screen shot.
    Also here is one with all gray glass.
    wow sweet! thx for your work, I like the palm look one. I send you a screeny from the treo680 phone app, those buttons are just a little bit flatter and more elegant :-)

    thx again!

    goldau
    Attached Images Attached Images
  2. #142  
    Hi Goldau:

    Your right the 680 does look differnt.

    Here is a gray one and a blue-gray incase someone wants one.
    Attached Images Attached Images
  3. #143  
    Quote Originally Posted by Port-Steve View Post
    Hi Goldau:

    Your right the 680 does look differnt.

    Here is a gray one and a blue-gray incase someone wants one.
    PERFECT!!!! Looks great!

    thx alot for your time!!

    Shimon any eta on the new beta that enables 2dial to goback to phone app after hangup ?
  4.    #144  
    Hi all,

    Version 1.09 (003) posted at www.shsh.com/beta

    - General: Added option to return to built-in “Phone” application after hanging a call up (only needed if TAKEphONE is not installed).

    Thanks !
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  5. #145  
    Quote Originally Posted by Port-Steve View Post
    Hi Goldau:

    Your right the 680 does look differnt.

    Here is a gray one and a blue-gray incase someone wants one.
    Hey Port-Steve,

    Im using Takephone now as well, and I wonder, if you might be able to make a Skin just like the one you did for 2dial , so it will be the same for Takephone, really treo680 looking

    :-)

    That would be awsome...
  6. #146  
    Quote Originally Posted by wbwjr View Post
    Shimon, Is there a way to get Takephone to open up on the Speed Dial sceen instead of the find screen? I do have a suggestion. I love the program but I wish you could make the launcher buttons on the left hand side larger. I use the speed dial and the find feature more than dialing a regular number. This especially helps while I am driving down the road (which I'm not supposed to do!)
    Thanks.
    Quote Originally Posted by TAKEphONE View Post
    Yes - go to TAKEphONE's "Using the PHONE button" preferences page, and change the tabs ordering.

    Dear Shimon;
    Can you do this in t680??
    I try to find this feature and try as you mentioned in this forum but still no luck. Need help on this. Thanks
  7.    #147  
    Hi,

    Same prefs page.
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  8. #148  
    i have takephone installed so i do not see the option to return to default phone after call is hungup.. if i dial v/m from takephone all is ok but sometimes in car i just hold down 1 to dial v/m and then when call is hung up it stays on 2dial. Anyway for 2dial to work on its own rather then work off of takephone, i would like the phone to go back to default phone application if i do not use takephone to initiate the call, example dialing from a speed key

    thanks
  9.    #149  
    Let me check it out.

    Nag me if I dont post within a week or so...
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  10. 02840's Avatar
    Posts
    81 Posts
    Global Posts
    146 Global Posts
    #150  
    Quote Originally Posted by italiangspot View Post
    i have takephone installed so i do not see the option to return to default phone after call is hungup.. if i dial v/m from takephone all is ok but sometimes in car i just hold down 1 to dial v/m and then when call is hung up it stays on 2dial. Anyway for 2dial to work on its own rather then work off of takephone, i would like the phone to go back to default phone application if i do not use takephone to initiate the call, example dialing from a speed key

    thanks
    I would like this option as well.
    [SIGPIC][/SIGPIC]
  11. #151  
    cool i am not the only one

    : )
  12. #152  
    Nag Nag Nag, lol

    any ideas on this..?

    Returning after call ends rather than sitting on the 2dial screen?
  13.    #153  
    Hi,

    Will get on this as soon as I post the next TAKEphONE version.
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  14.    #154  
    Hi all,

    Version 1.09 (004) posted at www.shsh.com/beta

    - Enabled option to return to built-in “Phone” application after
    hanging a call up - even if TAKEphONE installed.

    (note: TAKEphONE options for "Return after call" will always
    override this one)

    Thanks.
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  15. #155  
    i have return after takephone calls only checked off in TAKEPHONE

    In 2dial i have the new option checked to return to default phone

    pressing and holding 1 from my launcher screen or sms screen TO CHECK V/M it does not go to default phone application, just stays with the 2dial screen up

    i currently use dialbyphoto and takephone

    when using 2dial i would either like to return to a phone application or just return to screen where i was, just not leave the 2dial profile screen there,,,

    any thoughts or suggestions?
  16.    #156  
    Quote Originally Posted by italiangspot View Post
    i have return after takephone calls only checked off in TAKEPHONE

    In 2dial i have the new option checked to return to default phone

    pressing and holding 1 from my launcher screen or sms screen TO CHECK V/M it does not go to default phone application, just stays with the 2dial screen up

    i currently use dialbyphoto and takephone

    when using 2dial i would either like to return to a phone application or just return to screen where i was, just not leave the 2dial profile screen there,,,

    any thoughts or suggestions?
    How do you hangup ?
    That option only works for hanging up using an on-screen hangup button...

    Can you try disabling DialByPhoto ?
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  17. #157  
    ohh, u have to use the hangup button on the screen...?

    it works fine if i do that, i was hanging up pressing the red button

    so to hangup with the screen i have to hit phone icon (using the sprint v/m profile) then hit the hang up button on the phone, rather then just hitting the red end button, more pressing just to hang up but if that is the only way ........ then ok

    treo 700p
  18.    #158  
    Quote Originally Posted by italiangspot View Post
    ohh, u have to use the hangup button on the screen...?

    it works fine if i do that, i was hanging up pressing the red button

    so to hangup with the screen i have to hit phone icon (using the sprint v/m profile) then hit the hang up button on the phone, rather then just hitting the red end button, more pressing just to hang up but if that is the only way ........ then ok

    treo 700p
    Hi,

    Hanging up by pressing the red button should take you back to the PHONE application by default, unless some other app (DialByPhoto ?) changes this behaviour.
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  19. twitch3's Avatar
    Posts
    821 Posts
    Global Posts
    860 Global Posts
    #159  
    Quote Originally Posted by italiangspot View Post
    ohh, u have to use the hangup button on the screen...?

    it works fine if i do that, i was hanging up pressing the red button

    so to hangup with the screen i have to hit phone icon (using the sprint v/m profile) then hit the hang up button on the phone, rather then just hitting the red end button, more pressing just to hang up but if that is the only way ........ then ok

    treo 700p
    You could set one of your buttons in 2Dial to hang up.
  20. #160  
    if i press and hold 1 down to call voicemail from the takephone application and hangup with red button the call returns to take phone, that is the way i have it setup with takephone, return after takephone calls

    dialbyphoto, if i press and hold one from there and hangup hitting the end button it takes me back to dialbyphoto calllog, just like it is programmed to do

    if i press and hold 1 from sms page or launcher page, after i hangup call with red button it stays on the 2dial screen, if i hangup using the onscreen hangup button it returns to treo default phone screen

    the options in takephone and dialbyphoto should only take affect if i am dialing from the application itself... do not think that there options would have any affect if i use a shortcut key from the sms screen or launcher screen, i am not using takephone or dialbyphoto to make the call, unless something is conflicting under the covers

    what is happening when everyone else hangs up with the red end button, when using 1 quick key
Page 8 of 12 FirstFirst ... 3456789101112 LastLast

Posting Permissions