Page 3 of 49 FirstFirst 1234567813 ... LastLast
Results 41 to 60 of 961
  1. #41  
    Excellent!!

    I can't think of any other feature to ask for .. unless you can make 4cast control the weather :-)
    --
    Aloke
    Cingular GSM
    Software:Treo650-1.17-CNG
    Firmware:01.51 Hardware:A
  2.    #42  
    Quote Originally Posted by aprasad
    Excellent!!

    I can't think of any other feature to ask for .. unless you can make 4cast control the weather :-)
    LOL
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  3. #43  
    Ok, strange happenings with the new version. If I go check out one of those maps and then hit "done" it goes back to the basic 4Cast screen with the forecast for the week and then if I do the left arrow on the 5 way it takes me to Zlauncher instead of back to 2day. It only does that if I have looked at a map. Also, if I look at a map and then hit done, it does not disconnect from the web so I need to remember (and others need to remember) to manually disconnect. Is it possible to create a preference to have it automatically disconnect after viewing a map web page too?
    Well, it isn't perfect and it makes me crazy, but I still do love my Treo!
    Sprint Treo 650 CDMA
  4.    #44  
    Quote Originally Posted by TheTreoGuy
    Ok, strange happenings with the new version. If I go check out one of those maps and then hit "done" it goes back to the basic 4Cast screen with the forecast for the week and then if I do the left arrow on the 5 way it takes me to Zlauncher instead of back to 2day. It only does that if I have looked at a map. Also, if I look at a map and then hit done, it does not disconnect from the web so I need to remember (and others need to remember) to manually disconnect. Is it possible to create a preference to have it automatically disconnect after viewing a map web page too?
    Hi,

    Afraid I cant help - opening a map means getting out of 2day (to Blazer), so when you come back its like you started it from the launcher.
    I guess Blazer does not disconnect, too.

    Sorry...
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  5.    #45  
    Hi all,

    A new version - 1.65 (005) - at www.shsh.com/beta

    - Maps: NetFront browser support.

    Thanks.
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  6. #46  
    Quote Originally Posted by TAKEphONE
    Hi,

    Afraid I cant help - opening a map means getting out of 2day (to Blazer), so when you come back its like you started it from the launcher.
    I guess Blazer does not disconnect, too.

    Sorry...
    OK, I like being able to go directly back to 2Day but no big deal. By the way, I noticed it did the double connect again this morning on the first auto refresh again
    Well, it isn't perfect and it makes me crazy, but I still do love my Treo!
    Sprint Treo 650 CDMA
  7.    #47  
    Hi all,

    New version of 4cast - 1.65 (006) - at www.shsh.com/beta

    - Prevent power off while connected.

    Thanks.
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  8. #48  
    I downloaded the new beta.

    Treo went to auto-update and I got some error about "db" or something.

    Manual update worked fine.
  9.    #49  
    Quote Originally Posted by lgreenberg
    I downloaded the new beta.

    Treo went to auto-update and I got some error about "db" or something.

    Manual update worked fine.
    Can you tell me the exact text ?

    was it "canned refreshes" ?
    or "point 3" ?
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  10. #50  
    Quote Originally Posted by TAKEphONE
    Hi all,

    New version of 4cast - 1.65 (006) - at www.shsh.com/beta

    - Prevent power off while connected.
    Could you elaborate?

    Will this prevent Treo from turning off while 4cast is actively downloading data? or when the Treo is connected to GPRS?
    --
    Aloke
    Cingular GSM
    Software:Treo650-1.17-CNG
    Firmware:01.51 Hardware:A
  11. #51  
    Quote Originally Posted by TAKEphONE
    Can you tell me the exact text ?
    LOL

    I knew you were going to say that.....

    My Treo powered off while I was typing and when I turned it on "Today" took over and the message was gone. I'll set it to 1 hr. update and try to catch the next time.
  12.    #52  
    Quote Originally Posted by aprasad
    Could you elaborate?

    Will this prevent Treo from turning off while 4cast is actively downloading data? or when the Treo is connected to GPRS?
    While downloading data.
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  13. #53  
    I just loaded the newest version and I find that if I go to 4cast and do a manual refresh and have it set to "disconnect on exit" it doesn't disconnect on exit if the phone turns off before I go back to 2Day, even if I come right back into the 4cast screen before going to 2Day.
    Well, it isn't perfect and it makes me crazy, but I still do love my Treo!
    Sprint Treo 650 CDMA
  14.    #54  
    Quote Originally Posted by TheTreoGuy
    I just loaded the newest version and I find that if I go to 4cast and do a manual refresh and have it set to "disconnect on exit" it doesn't disconnect on exit if the phone turns off before I go back to 2Day, even if I come right back into the 4cast screen before going to 2Day.
    Hi,

    Maybe I do not understand correctly, but - if you did not get out of 2day before the power off, then it does not meet the condition of "disconnect on exit" ?
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  15. #55  
    Quote Originally Posted by TAKEphONE
    Hi,

    Maybe I do not understand correctly, but - if you did not get out of 2day before the power off, then it does not meet the condition of "disconnect on exit" ?
    I don't get out of 2day. What happens is 4cast refreshes and then if it doesn't automatically go back to 2day and instead the phone powers off then when I turn it back on and it is still on the 4cast screen and then I manually go back to 2day then 4cast doesn't disconnect "on exit".
    Well, it isn't perfect and it makes me crazy, but I still do love my Treo!
    Sprint Treo 650 CDMA
  16.    #56  
    Quote Originally Posted by TheTreoGuy
    I don't get out of 2day. What happens is 4cast refreshes and then if it doesn't automatically go back to 2day and instead the phone powers off then when I turn it back on and it is still on the 4cast screen and then I manually go back to 2day then 4cast doesn't disconnect "on exit".
    I will try to recreate this.

    Edit: just did. Will investigate.

    Thanks.
    Last edited by TAKEphONE; 10/21/2005 at 01:44 AM.
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  17.    #57  
    Hi all,

    A new version - 1.65 (007) - at www.shsh.com/beta

    - General: Fix for "disconnect on exit" after power off/on.
    - General: Fix for canned refreshes (errors in auto-refresh).

    Thanks.
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  18. #58  
    Quote Originally Posted by TAKEphONE
    Hi all,

    Just posted the first high-res build of 4cast - my weather browser (and plugin for 2day & ZLauncher) at www.shsh.com/beta

    Any feedback is most welcome !

    Thanks.
    I'm a little late to this thread, but wanted to say the hi-res version is absolutely GORGEOUS!

    Thanks Shimon!

    tanster
    Treo 650 on Sprint, as of 11/18/04!
    To transfer data from your current Palm device to the Treo 650, click here.
    To see my Treo 650 pics, click here.
  19.    #59  
    Hi,

    I have just declared 4cast 1.65 as a release !

    It has:
    - Today's & next 4 days weather forecast, including text info.
    - High-resolution support.
    - Auto-update.
    - Radar map images.

    Thanks you all.
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  20. #60  
    Have you checked out proxy server settings support for your app?
Page 3 of 49 FirstFirst 1234567813 ... LastLast

Posting Permissions