Results 1 to 11 of 11
  1.    #1  
    When trying to use a custom background it gives me the error:

    Memory: out of space. (Mem 0102)

    I have 17 mbs free on the phone and plenty on my card, any ideas?
  2. #2  
    Quote Originally Posted by nospleen
    When trying to use a custom background it gives me the error:

    Memory: out of space. (Mem 0102)

    I have 17 mbs free on the phone and plenty on my card, any ideas?
    Try a soft reset, it will clean your dBCache !
  3.    #3  
    I already did, but no luck?
  4. #4  
    Thats the same way with me Grrrr. So what I have to do is make it so that the JPEG is already in PDB format, then install it onto the treo, or keep it in the Zlauncher/backimage folder. I believe the quick install will help do this for you, I another palm to get the file. I copied the file from the palm onto the card, installed the card into the Treo and then work it from there. I don't know why I run out of space for a 32KB JPEG file but I have enough room for a 200KB PDB image size lol.
  5.    #5  
    What program can I use on a mac to convert the jpg to a pdb? I do have missing sync if this helps?
  6. #6  
    Hmmm, a mac. I'm not too sure bout that. One of the disadvantages of being one of the elite it seems heheh. If you need, I can convert them for you (If its not tooo many of course heheh). I would say I hope you have another palm nearby you . Proably don't though correct ^_^.
  7. #7  
    just a thought - what size are the jpegs you are trying to use? If they are more than 320x320 pixels, you should resize them before sending to your card. Zlauncher has to uncompress the jpegs to use them, which requires quite a bit more storage than the size of the jpg. Mine go from around 50k jpegs to over 200k uncompressed. Also, are you storing your jpegs on the card under /palm/programs/zlauncher/backimage?
    <a href="http://www.chocopoolp.com/"><img src="http://www.chocopoolp.com/logos/banner-1.gif"></a>
  8. #8  
    Ok.... Now I am having the same problem. But only with images I just copied onto my card. The images that I have had on there for a couple months are still working fine, but the ones I just added give me the out of memory error. Very wierd. Any ideas? Any ZZtechs out there?
    <a href="http://www.chocopoolp.com/"><img src="http://www.chocopoolp.com/logos/banner-1.gif"></a>
  9. deanfx's Avatar
    Posts
    288 Posts
    Global Posts
    413 Global Posts
    #9  
    have you got jpedlib installed from the zlauncher folder?
  10. #10  
    Found the problem. I had inadvertantly saved my newer images as progressive jpegs, which Zlauncher apparently doesn't like.
    <a href="http://www.chocopoolp.com/"><img src="http://www.chocopoolp.com/logos/banner-1.gif"></a>
  11. #11  
    Found the problem. I had inadvertantly saved my newer images as progressive jpegs, which Zlauncher apparently doesn't like.
    Good, to know! I recetnly went through email support with ZZTECHs exactly about this issue...

    Hello,

    Thank you for your letter!

    Please try the attached Jpeg file again. I just help you to converted
    it.
    Please let me know if you still cannot make it work.

    If you have any suggestions or questions, please let us know.

    Best regards,

    Ken
    Customer Service
    Guangzhou Zhangzhe Technology CO, LTD

    ****************************************
    * Website: www.zztechs.com *
    * Support: support@zztechs.com *
    * Tel: +86-02038803782-805 *
    * Address: Rm.2506, Guanghua Building, *
    * No.86, Tianhe Bei Road, *
    * Guangzhou, China. *
    ****************************************
    >>Sure, here are the jpg files I was having problems
    >with!
    >
    >Cheers,
    >
    >Gaurav
    >
    >--- ZZTechs Support <support@zztechs.com> wrote:
    >
    >> Hello,
    >>
    >> Thank you for your letter!
    >>
    >> For our further references, would you please send me
    >> that photo?
    >>
    >> If you have any suggestions or questions, please let
    >> us know.
    >>
    >> Best regards,
    >>
    >> Ken
    >> Customer Service
    >> Guangzhou Zhangzhe Technology CO, LTD
    >>
    >> ****************************************
    >> * Website: www.zztechs.com *
    >> * Support: support@zztechs.com *
    >> * Tel: +86-02038803782-805 *
    >> * Address: Rm.2506, Guanghua Building, *
    >> * No.86, Tianhe Bei Road, *
    >> * Guangzhou, China. *
    >> ****************************************
    >> >>Dear Ken,
    >> >
    >> >Yes I installed the Jpeglib on the Treo 650. In
    >> fact,
    >> >I intially thought my Zlauncher installation might
    >> be
    >> >corrupted so I reinstalled the Jpeglib.prc and the
    >> >main Zlauncher.prc, but I still get the same error.
    >>
    >> >Also, the pics are already resized to 320x320...
    >> >
    >> >Are there any other solutions to this problem?
    >> >
    >> >Thanks and Sincerely,
    >> >
    >> >Gaurav
    >> >
    >> >
    >> >--- ZZTechs Support <support@zztechs.com> wrote:
    >> >
    >> >> Hello,
    >> >>
    >> >> Thank you for your letter!
    >> >>
    >> >> Have you install 'JpegLib.prc' on your device
    >> yet?
    >> >> Which can
    >> >> be found in the folder 'Plugin' of the download
    >> >> package.
    >> >>
    >> >> PS. You need to resize the dimension of those pic
    >> >> into 320X320.
    >> >>
    >> >> If you have any suggestions or questions, please
    >> let
    >> >> us know.
    >> >>
    >> >> Best regards,
    >> >>
    >> >> Ken
    >> >> Customer Service
    >> >> Guangzhou Zhangzhe Technology CO, LTD
    >> >>
    >> >> ****************************************
    >> >> * Website: www.zztechs.com *
    >> >> * Support: support@zztechs.com *
    >> >> * Tel: +86-02038803782-805 *
    >> >> * Address: Rm.2506, Guanghua Building, *
    >> >> * No.86, Tianhe Bei Road, *
    >> >> * Guangzhou, China. *
    >> >> ****************************************
    >> >> >soft name: ZLauncher
    >> >> >
    >> >> >type: Report of error from software
    >> >> >
    >> >> >vertion: 5.31
    >> >> >
    >> >> >factory: Palm
    >> >> >
    >> >> > name of pda: Sprint Treo 650
    >> >> >
    >> >> >os: Palm OS 5.X
    >> >> >
    >> >> >space: 11 MB
    >> >> >
    >> >> >other: Dear Sirs,
    >> >> >
    >> >> >I am getting an error trying to convert jpeg to
    >> >> backimage from SD card. The error dialog is:
    >> >> >
    >> >> >Memory: out of space.
    >> >> >(Mem 0102)
    >> >> >
    >> >> >I have reinstalled both the main zlauncher prc
    >> and
    >> >> the jpeglib file. I have 11 MB free on ram. The
    >> >> jpeg files on the card are only 14 Kb in size.
    >> >> Please help as I am no longer able to convert new
    >> >> backimages on my Treo!
    >> >> >
    >> >> >Thank you and sincerely,
    >> >> >
    >> >> >Gaurav
    >> >> >
    >> >>
    Eventually the solution I found was to save the jpegs as bmp files instead (using InfranView). I think moved the bmp to the card and Zlauncher was finally able to convert them to backimages!

    Cheers!
    _________________
    aka Gfunkmagic

    Current device: Palm Pre
    Device graveyard: Palm Vx, Cassiopeia E100, LG Phenom HPC, Palm M515, Treo 300, Treo 600, Treo 650, Treo 700p, Axim X50v, Treo 800w



    Please don't PM me about my avatar. For more info go here.

    Restore your Pre to factory settings using webos doctor and follow these instructions

Posting Permissions