Page 11 of 14 FirstFirst ... 67891011121314 LastLast
Results 201 to 220 of 268
  1. #201  
    Quote Originally Posted by seidioseidio
    We will set up for purchasing on our site today.

    Seidio

    Ok.......I just checked and it is still not up. I am assuming it will state something about working with the Vaja cases right?
  2. #202  
    Quote Originally Posted by txschafers
    Ok.......I just checked and it is still not up. I am assuming it will state something about working with the Vaja cases right?

    It will be up before 5:00PM today. yes, it will state working with Vaja case. Seidio develops another new tooling for this innodock just to fit the Treo 650 with Vaja case. All other functions remain the same.

    David Chang
    Seidio
  3. #203  
    Will this new design work with other cases like the one that I have from EBcases.com? Or is it a Vaja snop?
    Pilot 5K->Palm IIIc->Tungsten T/T2->Treo 650/680 -> Pre+ (1.4.5 & Uberkernel)
  4. #204  
    Quote Originally Posted by swieder
    Will this new design work with other cases like the one that I have from EBcases.com? Or is it a Vaja snop?
    Hi Scott,

    This Innodock is for Vaja. Your problem is angle after Treo sits in the Innodock.

    David chang
  5. #205  
    Quote Originally Posted by txschafers
    Ok.......I just checked and it is still not up. I am assuming it will state something about working with the Vaja cases right?

    The Innodock for Treo 650 with VajaT-65 case is available now. It is only available in Treo silver.

    http://www.seidioonline.com/ProductD...DPATR650V%2DSL
  6. #206  
    It appears that this cradle will work ONLY with the Vaja T65. (The connector looks fixed (and elevated) to fit the T65 case.

    A better choice would have been to design/redesign the the regular Innodock (maybe with an adapter or connector extender) to accept other cases AND the T65.

    If I buy this new Innodock and change the case to some other one, then the cradle is of no use to me.
    --
    Aloke
    Cingular GSM
    Software:Treo650-1.17-CNG
    Firmware:01.51 Hardware:A
  7. #207  
    Quote Originally Posted by aprasad
    It appears that this cradle will work ONLY with the Vaja T65. (The connector looks fixed (and elevated) to fit the T65 case.

    A better choice would have been to design/redesign the the regular Innodock (maybe with an adapter or connector extender) to accept other cases AND the T65.

    If I buy this new Innodock and change the case to some other one, then the cradle is of no use to me.
    This Innodock can also work with skin cases or other cases if you choose to change the Vaja to some other one.

    David Chang
  8. DocGo's Avatar
    Posts
    341 Posts
    Global Posts
    593 Global Posts
    #208  
    My goodness, it is MUCH more expensive than the "regular" innodock. I have bought one of the originals when it just came out and I wish Seidio would offer some sort of discount for folks who "beta-tested" the innodock and found out that it didn't work with a Vaja T65.
    The Doctor is IN!
    Gadget: Rogers Treo 680 (unlocked) GSM
    Cases: Still deciding
  9. #209  
    My credit card and I are wiating for the site to be updated with the Vaja compatiable cradle. I called the order line but they said they cannot take an advance order. It sounded like it might be the end of the week and not today that it is available for sale. Are we really going to see this available today?
  10. #210  
    Quote Originally Posted by txschafers
    My credit card and I are wiating for the site to be updated with the Vaja compatiable cradle. I called the order line but they said they cannot take an advance order. It sounded like it might be the end of the week and not today that it is available for sale. Are we really going to see this available today?
    Try this,

    http://www.seidioonline.com/ProductD...DPATR650V%2DSL

    David Chang
  11. #211  
    Quote Originally Posted by seidioseidio

    All right!!!ust ordered it on line!

    Thanks David!
  12. #212  
    Quote Originally Posted by txschafers
    All right!!!ust ordered it on line!

    Thanks David!
    Thanks Jeff. It will go out tomorrow.

    David Chang
    Seidio
    dsc@seidio.com
  13. #213  
    Quote Originally Posted by seidioseidio
    This Innodock can also work with skin cases or other cases if you choose to change the Vaja to some other one.

    David Chang
    Could you verify: Does the T65-Innodock have a sliding, adjustable connector like the original Innodock?

    Or is the connector on the T65-Innodock fixed?
    --
    Aloke
    Cingular GSM
    Software:Treo650-1.17-CNG
    Firmware:01.51 Hardware:A
  14. eKeith's Avatar
    Posts
    759 Posts
    Global Posts
    779 Global Posts
    #214  
    Quote Originally Posted by seidioseidio
    The Innodock for Treo 650 with VajaT-65 case is available now. It is only available in Treo silver.
    David,

    Please correct me if I am mistaken:
    With USB charging the PC needs to be powered-up and ON.
    Therefore, if I shutdown my PC at night I will need to swap the USB plug from the PC to a wall charger so that the 650 can charge overnight.
    This can be very inconvenient as cables and power outlets are at the back on the desk etc.

    Therefore, will Seido consider offering a variation to this cradle that can charge from a wall charger but sync to the PC simultaneously a la PalmOne standard cable? Do you aready have a similar solution for the 650?

    Thanks,
    Keith
  15. #215  
    Quote Originally Posted by aprasad
    Could you verify: Does the T65-Innodock have a sliding, adjustable connector like the original Innodock?

    Or is the connector on the T65-Innodock fixed?
    T-65 Innodock also has a sliding, adjustable connector like the original Innodock.

    David Chang
    Seidio
  16. #216  
    Quote Originally Posted by eKeith
    David,

    Please correct me if I am mistaken:
    With USB charging the PC needs to be powered-up and ON.
    Therefore, if I shutdown my PC at night I will need to swap the USB plug from the PC to a wall charger so that the 650 can charge overnight.
    This can be very inconvenient as cables and power outlets are at the back on the desk etc.

    Therefore, will Seido consider offering a variation to this cradle that can charge from a wall charger but sync to the PC simultaneously a la PalmOne standard cable? Do you aready have a similar solution for the 650?

    Thanks,
    Keith
    Hi keith,

    Thank you very much for your feedback.

    Seidio continues to look for ways to meet users' need. We are working on a solution to allow to charge from a wall charger but sync to the PC simulatneously.

    The solution is expected to be available 7-10 days from now.

    David Chang
    Seidio
    dsc@seidio.com
  17. eKeith's Avatar
    Posts
    759 Posts
    Global Posts
    779 Global Posts
    #217  
    Quote Originally Posted by seidioseidio
    Hi keith,

    Thank you very much for your feedback.

    Seidio continues to look for ways to meet users' need. We are working on a solution to allow to charge from a wall charger but sync to the PC simulatneously.

    The solution is expected to be available 7-10 days from now.

    David Chang
    Seidio
    dsc@seidio.com
    Fantastic!
    I can't wait to dump my problematic OEM cable...
    Current Phones: Unlocked AT&T Pre3; Samsung Galaxy Nexus i9250; HTC Desire A8181
    Current Tablets: Lenovo ThinkPad Tablet 183825U; HP TouchPad 32GB w/ACL
    Previous Devices: Unlocked UK Pre3; HTC Touch Diamond; Palm Unlocked GSM Treo 680; PalmOne Unlocked GSM 650; Palm Tungsten T3 w/PalmOne WiFi Card, PowerToGo and ASUS WL-330g; 3Com Palm III; Sony Clie N760C
  18. #218  
    ok i wanna buy a cradle, if i get the one built for the T65 will it fit all other cases too? (i.e. all the ones that fit last model) right now i have a Vaja PA31, will this cradle work for it? i may get another case or two and dont wanna have to buy another cradle for the cases to fit.

    Thanks in advance.
    Wisdom sheds light on the knowledge you have accumulated

    Palm Pre (Sprint)
  19. #219  
    I picked up the inline volume control from Radio Shack. It solved the problem. I can now use the innodock audio out with portable speakers and wireless headphones. The inline volume control should be provided to everyone who has purchased the innodock. My cost for the piece was $7.00. Maybe Seido or Treocentral will send me a check.

    John
  20. #220  
    Seidio is recommending their audio coupler for $4.95. Any audioheads know what this thing is doing? Is it more than just a couple of resistors in-line?

    Also, is anyone using the LH-650 case with the innodock? It is supposedly a clone of the Vaja, so would I need the new version of the dock?
    <a href="http://www.chocopoolp.com/"><img src="http://www.chocopoolp.com/logos/banner-1.gif"></a>

Posting Permissions