Page 1 of 2 12 LastLast
Results 1 to 20 of 38
  1.    #1  
    I either see these really cheap $5 cradles that will ruin the interior of my car or break my vent OR these rediculously expensive car kits for $200. UGH!!! I just want to mount the damn phone and talk on the bluetooth. I don't see why it's so hard to make a 2-in-1 charger/cradle at a descent price. Something you stick in your lighter with a short sturdy male end that supports the cradle and charges the phone at the same time.
  2. #2  
    I have a 600 and got the "stand" that sits in your cup holder and "squeezes" together to hold the device. It works great. You have to remove it from the case but it serves the purpose...
  3.    #3  
    Masterlisner, do you have a picture or website so I can look at it?
  4. #4  
    What about the proclips?

    http://www.proclipusa.com/
    T750 w/Cingular
    Black Jawbone
  5. #6  
    Quote Originally Posted by millerhifi
    What about the proclips?

    http://www.proclipusa.com/

    Beautiful system except that it ends up costing $60.00 after you get the $30 device to hold the phone and the $30 device to attach to the car. Kind of expensive.
    Nanotechnology Nerd
    i300-->i330-->i500-->6700(1 wk!)-->Sprintt650-->gsm650-->HTC Universal (1 mo.)-->gsm650-->Cing8525(3wks!)-->gsm650
  6. #7  
    They are expense but good.
    T750 w/Cingular
    Black Jawbone
  7. #8  
    This windshield auto mount works great with my Treo 650. The suction cup mount is unbelievably secure.

    http://www.extremepda.com/page/XPDA/...0/TREO650MOUNT
  8. #9  
    I just got my proclipusa set up. It is NICE! Expensive, but NICE!
    I will post pics in the next couple of days.
    Ron
  9. aldamon's Avatar
    Posts
    650 Posts
    Global Posts
    684 Global Posts
    #10  
    Quote Originally Posted by jackalope
    This windshield auto mount works great with my Treo 650. The suction cup mount is unbelievably secure.

    http://www.extremepda.com/page/XPDA/...0/TREO650MOUNT
    jackalope, how much give is there with the side posts? My 650 is in an InnoPocket aluminum case so I need a little extra horizontal space.
  10. #11  
    You can get the generic windsheild auto mounts on eBay for less then $10-15 shipped... I am looking for one now. Cause with the Bluetooth "earring" always in my ear, I am tired of having to look DOWN at my phone on the seat next to me whenever it rings. And plus its easier and safer to have it sitting above in my line of sight...

    When you go to eBay you can do a search on "(pda, ipod, treo) windshield". Plus these are also interchangeable with whatever pda, gps or phone you have as these kind are all adjustable in width and depth so they can grow with whatever you use. Its worth a shot and cheap!

    http://search.ebay.com/pda-ipod-treo...9Q20windshield

    http://www.globalpremier.com/pdamount/pda-mount-car.jpg
    Last edited by techprincesse; 02/12/2005 at 09:32 AM.

    Sprint PCS user since 1999

    -=-=-
    Palm IIIC -> Palm M100 -> Treo 300 -> Treo 600 -> Treo 650 -> Treo 700P -> Treo 755P
    Do I count as a Palm addict if I still have my original Palm IIIC?
    -=-=-
    Praise is what I do...
  11. #12  
    Quote Originally Posted by jackalope
    This windshield auto mount works great with my Treo 650. The suction cup mount is unbelievably secure.

    http://www.extremepda.com/page/XPDA/...0/TREO650MOUNT
    I second this recommendation, except that I use the airvent mount. I did extensive research and found this to be the most economical and secure option.
  12. #13  
    I got the ProClips. Here are some pics of it...
    Attached Images Attached Images
  13. #14  
    I am using the iPod Vent mount from ExtremePDA.com, and am very happy with it. Tried the windshield PDA mount first. Very solid product, but I ended up not liking to have it hang from the windshield.

    The iPod holder is slightly smaller than the PDA holder, a perfect fit for the Treo. And the vent mount is really good, with little adjustable sliders on the vent clips to avoid it from moving too much.
    http://www.extremepda.com/page/XPDA/...CC/IPODMOUNT4G
  14. #15  
    Quote Originally Posted by aldamon
    jackalope, how much give is there with the side posts? My 650 is in an InnoPocket aluminum case so I need a little extra horizontal space.
    The iPod holder would probably even fit with that case...the PDA holder most certainly will.
  15. #16  
    I also purchased the iPod holder from Extreme PDA, but I mounted the holder on a ProClip console mount holder. Can't afford to give up any AC vents in the summer. This combo works great. THe other plus with the iPod holder is that it will work with whatever case you happen to be using on the 650 at the time. SKin case, Vaja, or "naked" 650, the holder is adjustable. Also very well made. I love Proclip, but the 650 holder does not allow for using with a case.
  16. aldamon's Avatar
    Posts
    650 Posts
    Global Posts
    684 Global Posts
    #17  
    Quote Originally Posted by techprincesse
    Damn, $12.00 USPS shipping on a $6.99 item? Someone's scamming Ebay. LOL. I might give one a shot. The only problem I foresee is my Innopocket case has a cover over the keys. The good news is it opens from left to right. The bad news is I don't know if the door will clear the right clamp on that case.

    EDIT: I went for one of these:

    http://cgi.ebay.com/ws/eBayISAPI.dll...sPageName=WDVW

    Cheap.
    Last edited by aldamon; 02/13/2005 at 02:03 PM.
  17. #18  
    Here is my ProClipsUSA


    I like it because it does not take up a vent, cup holder, or windshield space.
    It is not in the way of my wife's knee, either.

    I am going to hardwire my charger and have it come up from under the right side so that it is not dangling anywhere!

    Ron
  18. #19  
    I use this awesome hookup I stumbled upon last year. It has a controllable vertical and a controllable 360 degree swivel action that makes it compatible for almost any car setup.
    Also, you can actually type on the keys with a solid feel when hooked up. It attaches to the car lighter AND has TWO lighter sockets for charging etc on the base!

    I have an EXTRA ONE which I might be willing to part with or $25 shipped.

    I am not sure if I will ever come across a setup as cool and useful as this one for a low price.

    PM me if interested.
    Attached Images Attached Images
    I have detailed files.
  19. iomatic's Avatar
    Posts
    629 Posts
    Global Posts
    645 Global Posts
    #20  
    Where'd you find that?
Page 1 of 2 12 LastLast

Posting Permissions