Page 79 of 170 FirstFirst ... 2969747576777879808182838489129 ... LastLast
Results 1,561 to 1,580 of 3383
  1. #1561  
    Quote Originally Posted by TheTreoGuy
    Shimon,
    There is a bug in the fix to 2Day that pulled it out of "hede". It suddenly shows up in hede from time to time and slows things way down again. Only fix is to soft reset and then it still happens without explanation.

    Update: It definitely kicks in when I go into YAHM and do anything with the hacks. When I then switch out of YAHM and back into 2Day suddenly 2Day is now in hede and slows things down again until I soft reset. Even going back to 1 instead of 3 for the views of "Calendar" doesn't fix it until a soft reset.
    since the update to 2day it been working good, and hasnt showed up in hede again. i went into yahm and enabled then disabled my hack then changed some settings ran PI again and still not in hede. Treoguy what do you change in yahm when this happens?
    Wisdom sheds light on the knowledge you have accumulated

    Palm Pre (Sprint)
  2. #1562  
    Quote Originally Posted by Franko515
    since the update to 2day it been working good, and hasnt showed up in hede again. i went into yahm and enabled then disabled my hack then changed some settings ran PI again and still not in hede. Treoguy what do you change in yahm when this happens?
    I have only TreoKeyHack enabled and when I go in and do anything with it and go back out to 2Day suddenly 2Day shows up in hede. Do you have 2Day set up to scroll through more than 1 view of calendar? That is where it would kick in. I have it set to scroll through 3 views of calendar on the "Operations" page in Preferences of 2Day. (the selection on that page is Datebook button runs 2day then 3 view/s of Calendar)
    Well, it isn't perfect and it makes me crazy, but I still do love my Treo!
    Sprint Treo 650 CDMA
  3. #1563  
    Quote Originally Posted by TheTreoGuy
    I have only TreoKeyHack enabled and when I go in and do anything with it and go back out to 2Day suddenly 2Day shows up in hede. Do you have 2Day set up to scroll through more than 1 view of calendar? That is where it would kick in. I have it set to scroll through 3 views of calendar on the "Operations" page in Preferences of 2Day. (the selection on that page is Datebook button runs 2day then 3 view/s of Calendar)
    i have the same settings as you but its not showing up in hede, even after i go into yahm and play around with different settings. do you have the latest version of the hack 4.1? and what version of 2day do you have?
    Wisdom sheds light on the knowledge you have accumulated

    Palm Pre (Sprint)
  4. #1564  
    Quote Originally Posted by Franko515
    i have the same settings as you but its not showing up in hede, even after i go into yahm and play around with different settings. do you have the latest version of the hack 4.1? and what version of 2day do you have?
    I have every option checked off in hack 4.1 and I'm using Beta 14q in 2Day. But now I can't replicate it so maybe it isn't just YAHM and that hack. I was sure that is what I did just before I noticed it the last time. I'll have to see if I can replicate it some other way and re-post I guess.

    Update: It just happened again. It happened after I went into VolumeCare and changed some things. And then I reset and it cleared out of hede again. Then just now it happened after it had done an auto-refresh in 4Cast and after I used DirAsst and checked directions by internet. It seems to happen somewhat randomly that it is fine for a while then just kicks back into hede.

    Update to the Update: Reverted back to 14p (instead of 14q) and now it seems fixed (but of course whatever 14q fixed isn't going to work in 14p). OOPS..wrong again. It just happened again with 14p. Went into YAHM. Disabled KeyClickSuppress, enabled TreoKeyHack, disabled KeyCaps650 (revised version) and now 2Day shows back up in hede until I soft reset.

    Yet another update: OK. It is not limited to YAHM changes that kick it back in. I just tried a few other programs (using ZLauncher to launch from the card for example) and that triggered 2Day to show back up in hede.
    Last edited by TheTreoGuy; 07/22/2005 at 06:06 PM.
    Well, it isn't perfect and it makes me crazy, but I still do love my Treo!
    Sprint Treo 650 CDMA
  5. #1565  
    Quote Originally Posted by TheTreoGuy
    I have every option checked off in hack 4.1 and I'm using Beta 14q in 2Day. But now I can't replicate it so maybe it isn't just YAHM and that hack. I was sure that is what I did just before I noticed it the last time. I'll have to see if I can replicate it some other way and re-post I guess.

    Update: It just happened again. It happened after I went into VolumeCare and changed some things. And then I reset and it cleared out of hede again. Then just now it happened after it had done an auto-refresh in 4Cast and after I used DirAsst and checked directions by internet. It seems to happen somewhat randomly that it is fine for a while then just kicks back into hede.

    Update to the Update: Reverted back to 14p (instead of 14q) and now it seems fixed (but of course whatever 14q fixed isn't going to work in 14p). OOPS..wrong again. It just happened again with 14p. Went into YAHM. Disabled KeyClickSuppress, enabled TreoKeyHack, disabled KeyCaps650 (revised version) and now 2Day shows back up in hede until I soft reset.

    Yet another update: OK. It is not limited to YAHM changes that kick it back in. I just tried a few other programs (using ZLauncher to launch from the card for example) and that triggered 2Day to show back up in hede.
    2Day is working perfectly for me. why do you have keycaps and treokeyhack? maybe thats the issue. delete one or the other then see if you still have problems ( i used keycaps w/o problems, and trepkeyhack, but not at the same time.)
    Wisdom sheds light on the knowledge you have accumulated

    Palm Pre (Sprint)
  6. #1566  
    Quote Originally Posted by Franko515
    2Day is working perfectly for me. why do you have keycaps and treokeyhack? maybe thats the issue. delete one or the other then see if you still have problems ( i used keycaps w/o problems, and trepkeyhack, but not at the same time.)
    The problem may have been VolumeCare, and I'm checking with the newest version. As for keycaps and treokeyhack, like I said I don't use them both at the same time. KeyCaps is disabled. TreoKeyHack is enabled.
    Well, it isn't perfect and it makes me crazy, but I still do love my Treo!
    Sprint Treo 650 CDMA
  7. #1567  
    Quote Originally Posted by TheTreoGuy
    The problem may have been VolumeCare, and I'm checking with the newest version. As for keycaps and treokeyhack, like I said I don't use them both at the same time. KeyCaps is disabled. TreoKeyHack is enabled.
    i think you may be right, this being the reason Jeff wants people to shy away from these "hacks"
    Wisdom sheds light on the knowledge you have accumulated

    Palm Pre (Sprint)
  8. #1568  
    Quote Originally Posted by Franko515
    i think you may be right, this being the reason Jeff wants people to shy away from these "hacks"
    This is exactly why you need to shy away from these "hacks". Just executing VolumeCare is not going to cause a reset unless you were running the version that had a problem in the tutorial part of the application.

    IMHO, we are going to see many more of these crashes and hangs as time goes on as more and more people run these 'hede' friendly programs.

    Jeff
  9. #1569  
    Hi,

    I did not implement any "callback" mechanism in any of my applications.

    I think I may have found the source of this "re-appearing hede" thing - forgot to change something when I made the transition.

    I will post a fixed version asap.

    Thanks !
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  10. #1570  
    Hi all,

    Posted version 1.31 (14r) at www.shsh.com/beta

    Fix for the improved notification handlers (replacing 'hede').

    TheTreoGuy - Please let me know if this works ok.

    Thanks !
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  11. #1571  
    Shimon - I'm running 14r on my SprintPCS Treo600 along with Agendus Standard 9.06 (latest version as of this posting). When I create a new todo item from within 2day and then click "Go To" to further complete the todo in Agendus (alarm and/or icon), a different todo will sometimes open in Agendus. This same issue happens sometimes when I open a pre-existing todo within 2day (which launches Agendus per my settings). The odd thing is that the problem happens once in a while and I cannot identify a common trait/catalyst. Not sure if this is a 2day issue or an Agendus issue. Have you or anyone else experienced this issue?
    Sprint Treo 600 (since October '03) --> PPC 6700 (exactly 29 days) --> Sprint Treo 600 --> Sprint Treo 700p --> BB Curve 8330.
  12. #1572  
    Quote Originally Posted by BeantownTreo600
    Shimon - I'm running 14r on my SprintPCS Treo600 along with Agendus Standard 9.06 (latest version as of this posting). When I create a new todo item from within 2day and then click "Go To" to further complete the todo in Agendus (alarm and/or icon), a different todo will sometimes open in Agendus. This same issue happens sometimes when I open a pre-existing todo within 2day (which launches Agendus per my settings). The odd thing is that the problem happens once in a while and I cannot identify a common trait/catalyst. Not sure if this is a 2day issue or an Agendus issue. Have you or anyone else experienced this issue?

    Hi,

    Ran into this in the past. Seems like an issue with Agendus (or at least the way I interface with it specifically). I have forwarded this to iambic.

    BTW - maybe you can post this at "my" forum in iambic website:
    http://support.iambic.com/forum/forumdisplay.php?f=119
    it might yield something...
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  13. #1573  
    Quote Originally Posted by TAKEphONE
    Hi,

    Ran into this in the past. Seems like an issue with Agendus (or at least the way I interface with it specifically). I have forwarded this to iambic.

    BTW - maybe you can post this at "my" forum in iambic website:
    http://support.iambic.com/forum/forumdisplay.php?f=119
    it might yield something...
    Done. Thanks.
    Sprint Treo 600 (since October '03) --> PPC 6700 (exactly 29 days) --> Sprint Treo 600 --> Sprint Treo 700p --> BB Curve 8330.
  14. #1574  
    Shimon - any chance of adding an option to view the weather on 2 lines instead of 1? this way the full city name (or more than shows now) could be displayed on the first line & the weather on the second.

    Thanks
  15. #1575  
    Quote Originally Posted by kayden75
    Shimon - any chance of adding an option to view the weather on 2 lines instead of 1? this way the full city name (or more than shows now) could be displayed on the first line & the weather on the second.

    Thanks
    You mean in 2day ? That would be a bit of a work right now...

    Wrote it down, though.
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  16. #1576  
    Shimon,

    Any comments on

    http://discussion.treocentral.com/sh...ad.php?t=91587

    Does 2day have information on which network/tower I am actually connected to? It would be cool to display that information.
    --
    Aloke
    Cingular GSM
    Software:Treo650-1.17-CNG
    Firmware:01.51 Hardware:A
  17. #1577  
    Quote Originally Posted by aprasad
    Shimon,

    Any comments on

    http://discussion.treocentral.com/sh...ad.php?t=91587

    Does 2day have information on which network/tower I am actually connected to? It would be cool to display that information.
    Hi,

    no - it's just a simple "Are you roaming ?" function.
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  18. #1578  
    It is interseting that Cingular still thinks that I'm on their network when I am actually roaming.

    How is roaming defined?
    --
    Aloke
    Cingular GSM
    Software:Treo650-1.17-CNG
    Firmware:01.51 Hardware:A
  19. #1579  
    Quote Originally Posted by TAKEphONE
    Hi all,

    Posted version 1.31 (14r) at www.shsh.com/beta

    Fix for the improved notification handlers (replacing 'hede').

    TheTreoGuy - Please let me know if this works ok.

    Thanks !
    Hi Shimon...so far so good! Todah!
    Well, it isn't perfect and it makes me crazy, but I still do love my Treo!
    Sprint Treo 650 CDMA
  20. #1580  
    How do I get the ToDo and Calendar items clubbed together for each day? I want

    ----
    Today's Todo
    Today's Calendar
    ----
    Tomorrow's ToDo
    Tomorrow's Calendar

    I think I had my 2day set up like this.. but after the Cingular update and reinstall of 2day, I am having to re-discover all the settings ....

    Maybe if we stopped being so demanding, Shimon will get some time to finish the Users Manual :-)
    --
    Aloke
    Cingular GSM
    Software:Treo650-1.17-CNG
    Firmware:01.51 Hardware:A

Posting Permissions