Page 75 of 170 FirstFirst ... 2565707172737475767778798085125 ... LastLast
Results 1,481 to 1,500 of 3383
  1. #1481  
    Quote Originally Posted by aprasad
    What is 2day (1.31 14d) supposed to do if a key is pressed while the 2day window is displayed?

    It is opening Phone and dialing that number (or looking up contacts if that is the option set in the Phone General Preferences). Is that normal?
    Hi,

    Yes - it should start the dialer (or TAKEphONE).
    You can configure this (or disable) at 2day's "Operation" preferences page at the bottom.
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  2. #1482  
    Quote Originally Posted by drpmr1
    my vzw connects to internet automatically even though i have turned off the connect automatically to internet option. i have a 10mb plan but am going to switch to pay as you go. thus i do not want it to connect automatically. any suggestions??
    Hi,

    May I ask - how is this related to 2day ?

    Thanks.
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  3. #1483  
    Okay Shimon, I obviously should defer to you on this one, thanks so much for looking into it. I think the thing that made me think it was something that could be worked around, was that it only starts to occur once I use 2day to actually open/edit a meeting/todo in agendus. Before then, it does not occur and I am able to cycle from 2day to through the different agendus views. Once again though, thanks for taking the time to look into this.
    Quote Originally Posted by TAKEphONE
    Hi,

    Check this again.
    2day does NOT alter Agendus prefs.
    What it does is change the SYSTEM prefs for the CALENDAR button assignment: It has to do this to allow Agendus to show more than one view.
    Problem is this confuses Agendus...

    Afraid right now I cant see how to resolve this without help from iambic, which is hard to do (requires program changes at their side...)
    I will contact them, and see what we can do together.
    In the meantime I will have to invalidate this option (more than one view) for Agendus... :-(

    Sorry...
  4. #1484  
    Quote Originally Posted by paulsjmail
    Okay Shimon, I obviously should defer to you on this one, thanks so much for looking into it. I think the thing that made me think it was something that could be worked around, was that it only starts to occur once I use 2day to actually open/edit a meeting/todo in agendus. Before then, it does not occur and I am able to cycle from 2day to through the different agendus views. Once again though, thanks for taking the time to look into this.
    Hi,

    When you open/edit via 2day, it launches Agendus with a specific command defined by the Palm OS for launching an application with opening a specific record. This seems to confuse Agendus...
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  5. GXX
    GXX is offline
    GXX's Avatar
    Posts
    73 Posts
    #1485  
    Not sure if this was already answered, only went through about 10-15 pages of this 75 page thread

    But can 2day be made to load when you come back from sleep?
  6. #1486  
    Preferences->Operation->run on power
    --
    Aloke
    Cingular GSM
    Software:Treo650-1.17-CNG
    Firmware:01.51 Hardware:A
  7. GXX
    GXX is offline
    GXX's Avatar
    Posts
    73 Posts
    #1487  
    ahh, overlooked that one. many thx.
  8. #1488  
    The antenna icon in 2day:

    In 2day 1.31 (14d), I am seeing the antenna in red color with a R on it. Does that indicate that I am roaming?

    The standard Phone application shows the regular black antenna, and I can connect to GPRS (double green arrows when connected, black triangle when not). I don't think that would be happening if I was roaming...
    --
    Aloke
    Cingular GSM
    Software:Treo650-1.17-CNG
    Firmware:01.51 Hardware:A
  9. #1489  
    Quote Originally Posted by aprasad
    The antenna icon in 2day:

    In 2day 1.31 (14d), I am seeing the antenna in red color with a R on it. Does that indicate that I am roaming?

    The standard Phone application shows the regular black antenna, and I can connect to GPRS (double green arrows when connected, black triangle when not). I don't think that would be happening if I was roaming...
    Hi,

    Do you have TAKEphONE ?
    What does it show ?

    Do you have a roamng indocator in the built-in dialer ? Did it ever show you roaming ?
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  10. #1490  
    I don't have TAKEphONE.

    The built-in Phone app. always shows the usual black antenna symbol.

    Even in 2day, the red antennae with R happens very rarely (I noticed it for the 1st time today) and when the signal level is very low. The odd thing is that when that was happening, the built-in dialer still showed no signs of roaming. I don't even know how the buil-in dialer (or any application) is supposed to show roaming. It always shows Cingular as the carrier.

    2day is back to normal display of antenna symbol now.
    --
    Aloke
    Cingular GSM
    Software:Treo650-1.17-CNG
    Firmware:01.51 Hardware:A
  11. #1491  
    Quote Originally Posted by aprasad
    I don't have TAKEphONE.

    The built-in Phone app. always shows the usual black antenna symbol.

    Even in 2day, the red antennae with R happens very rarely (I noticed it for the 1st time today) and when the signal level is very low. The odd thing is that when that was happening, the built-in dialer still showed no signs of roaming. I don't even know how the buil-in dialer (or any application) is supposed to show roaming. It always shows Cingular as the carrier.

    2day is back to normal display of antenna symbol now.
    Hi,

    Strange.

    When this happens again - let me know, if you are willing to do some testing.

    Thanks
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  12. #1492  
    I don't know if it is something with 2Day or not, but I get a lot of soft resets lately and today it showed 2Day as the culprit. I got them yesterday after watching a film on TCPMP (which I keep on my card and launch through a favorites key "T" when in 2Day and by means of ZLauncher). When I stopped the film and tried to go directly to 2Day (I have it set to launch from my calendar button) it caused a soft reset. Then today, just when doing nothing special I went to go to 2Day and it happened. I just updated to the latest version yesterday.
    Well, it isn't perfect and it makes me crazy, but I still do love my Treo!
    Sprint Treo 650 CDMA
  13. #1493  
    Does ##377 provide any more detailed error message?
    --
    Aloke
    Cingular GSM
    Software:Treo650-1.17-CNG
    Firmware:01.51 Hardware:A
  14. #1494  
    Quote Originally Posted by TAKEphONE
    Hi,

    Strange.

    When this happens again - let me know, if you are willing to do some testing.

    Thanks
    I'll keep an eye for it. The problem is, it happens for a short time and only when the signal is low. Maybe the Treo is connecting to a different tower for a short time (my work is at a location with weak signal .. out in the country). Then it switches back to the primary Cingular tower? This is not a problem other than a curiosity.

    Is there any other indication on a normal Treo that would indicate roaming? Then I can check that when 2day thinks that I'm roaming. ....
    --
    Aloke
    Cingular GSM
    Software:Treo650-1.17-CNG
    Firmware:01.51 Hardware:A
  15. #1495  
    Quote Originally Posted by aprasad
    Does ##377 provide any more detailed error message?
    Just says a reset was caused on (day time) while running "2day": Fatal Exception
    Well, it isn't perfect and it makes me crazy, but I still do love my Treo!
    Sprint Treo 650 CDMA
  16. #1496  
    Quote Originally Posted by aprasad
    I'll keep an eye for it. The problem is, it happens for a short time and only when the signal is low. Maybe the Treo is connecting to a different tower for a short time (my work is at a location with weak signal .. out in the country). Then it switches back to the primary Cingular tower? This is not a problem other than a curiosity.

    Is there any other indication on a normal Treo that would indicate roaming? Then I can check that when 2day thinks that I'm roaming. ....
    Never seen it here, but I think it might display a small R somewhere.
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  17. #1497  
    Quote Originally Posted by TheTreoGuy
    I don't know if it is something with 2Day or not, but I get a lot of soft resets lately and today it showed 2Day as the culprit. I got them yesterday after watching a film on TCPMP (which I keep on my card and launch through a favorites key "T" when in 2Day and by means of ZLauncher). When I stopped the film and tried to go directly to 2Day (I have it set to launch from my calendar button) it caused a soft reset. Then today, just when doing nothing special I went to go to 2Day and it happened. I just updated to the latest version yesterday.
    Can you tell me the exact text of the reset message (when it happens) ?
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  18. #1498  
    Quote Originally Posted by TAKEphONE
    Can you tell me the exact text of the reset message (when it happens) ?
    Just happened twice again and the exact text is:

    A reset was caused on (day time) while running "2day": Fatal Exception
    Well, it isn't perfect and it makes me crazy, but I still do love my Treo!
    Sprint Treo 650 CDMA
  19. #1499  
    Quote Originally Posted by TheTreoGuy
    Just happened twice again and the exact text is:

    A reset was caused on (day time) while running "2day": Fatal Exception
    Hi,

    Not much help there.... :-)

    Can you supply more details - when does this happen ? does it happen when doing that and NOT when doing another thing ?
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  20. #1500  
    Shimon, please help. I am having a problem with resets. I have TP and 2 day installed. I am also using Callfilter 1.2 for filtering my calls. Here is my problem. When on a call after I am finished the CF call log pops up and I makes notes then save the log...after which it reverts back to TP. Then I push on the hard button to bring up 2day...bam reset, every single time. Error code is as follows:
    A reset was caused on 7/1/05 at 8:55am while running 2day.
    Emul 68kmain.c,
    Line:403,illegal
    instruction D40B@
    address 1002 DD30

    I have a T-mo Treo 600 running Firmware 03.05 SW 1.12-INT Hardware B

    Hope you can help me with this.

    Thanks Tippy

Posting Permissions