Page 69 of 170 FirstFirst ... 1959646566676869707172737479119169 ... LastLast
Results 1,361 to 1,380 of 3383
  1. #1361  
    Quote Originally Posted by TAKEphONE
    - Treo gadgets: my own display for battery & radio, so that they can be transparent on background skin, plus ROAMING display in radio gadget.
    Shimon,

    Could you elaborate? How do I make these icons transparent?
    What's Radio gadget?
    --
    Aloke
    Cingular GSM
    Software:Treo650-1.17-CNG
    Firmware:01.51 Hardware:A
  2. fmcgirt's Avatar
    Posts
    229 Posts
    Global Posts
    294 Global Posts
    #1362  
    Simon,

    I know you don't want to hear about another requested feature but a lot of us with unlocked GSM 650s on TMO are getting killedwith random resets due to problems with DBCache. I use maintenance resets each morning and MemoryInfo constantly but stlll get hit with the occasional reset - seems like when answering an important call mostly.

    I was wondering if we could get a "dbcache state" icon that could be selected in Preferences>Plugins and monitored. For me this is almost as important as the battery since I always get a reset long before I need to charge.

    Also I mentioned this before but a two or three char indication of the current network service would certainly be appreciated by people like me that seem to be caught between two services a lot. Even a replacement of the 2Day! title by TMO or VZ or SP or CIN would be great!

    Thanks for considering this,

    Frank
  3. #1363  
    Crashes in 4cast 1.52 (001).

    I have one city defined. I want to add a second one. I go through the steps (the city is E. Liberty in Ohio). The city is not listed or found in the search. I choose to input the code manually. It is USOH0277. After entering this, 4cast tries to read the information and causes a soft reset.

    #*377 says "Fatal Exception". The Keytest log is

    18 ff
    18 ff
    7 ff
    1 1
    10 20
    10 10
    7 ff
    4 ff
    19 ff
    19 ff

    This may be related to the 4cast issue I had posted a few weeks back (had to do with multiple cities in the city list ... )

    Aloke
    --
    Aloke
    Cingular GSM
    Software:Treo650-1.17-CNG
    Firmware:01.51 Hardware:A
  4. #1364  
    Quote Originally Posted by aprasad
    Shimon,

    Could you elaborate? How do I make these icons transparent?
    What's Radio gadget?
    Hi,

    Sorry.

    They ARE transparent - if you use a full screen background, then in prev. versions the antenna (signal) icon (gadget) would show on an opaque white square. Now it does not.
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  5. #1365  
    Quote Originally Posted by Mike129
    In the latest versions, Shimon, is there any way to invert the color of the signal strength and roaming indicator when using a dark background?

    Thanks!
    --Mike
    Hi,

    Good point.

    I will write it down for the future upgrades, since right now it would complicate stuff for me...

    Thanks !
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  6. #1366  
    Quote Originally Posted by aprasad
    Crashes in 4cast 1.52 (001).

    I have one city defined. I want to add a second one. I go through the steps (the city is E. Liberty in Ohio). The city is not listed or found in the search. I choose to input the code manually. It is USOH0277. After entering this, 4cast tries to read the information and causes a soft reset.

    #*377 says "Fatal Exception". The Keytest log is

    18 ff
    18 ff
    7 ff
    1 1
    10 20
    10 10
    7 ff
    4 ff
    19 ff
    19 ff

    This may be related to the 4cast issue I had posted a few weeks back (had to do with multiple cities in the city list ... )

    Aloke
    I will check it out.

    Thanks.
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  7. #1367  
    Quote Originally Posted by kennymobley
    Sure...

    Show to do is checked
    for: today & next 5 (+1 is highlighted)
    Hide undated is highlighted
    Overdue items: show days late
    Show pri. is highlighted
    Open with: DateBk5

    Config Button:
    Goto > btn is checked

    Categories:
    I have checked and unchecked categories

    Also, I have run dbScan on my datebook records.

    Kenny
    Hi,

    Does this happen when you do it NOW ?
    On a new record ?
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  8. #1368  
    Quote Originally Posted by TAKEphONE
    Hi,

    Sorry.

    They ARE transparent - if you use a full screen background, then in prev. versions the antenna (signal) icon (gadget) would show on an opaque white square. Now it does not.
    How do you get a full screen background?

    No skin (solid blue background)
    Default (the ring binder image that you supply)
    Camera image (640x480 jpegs)

    They all cover the screen below the top area that has the signal meter, mute indicator etc.. which are always with a white background..

    How do I get a full screen background in 2day?
    --
    Aloke
    Cingular GSM
    Software:Treo650-1.17-CNG
    Firmware:01.51 Hardware:A
  9. #1369  
    Shimon,

    I just tried it again. I created a new todo and selected a category and priority. The todo is created in unfiled with a priority of zero. If I go to the todo "Details" in Datebk5, my Treo soft resets.

    As a workaround, in Datebk5, I can change the priority by using the stylus and tapping on the "0." I can change the category by using the pop-up menu and selecting "Set Category."

    Kenny
  10. #1370  
    Quote Originally Posted by aprasad
    How do you get a full screen background?

    No skin (solid blue background)
    Default (the ring binder image that you supply)
    Camera image (640x480 jpegs)

    They all cover the screen below the top area that has the signal meter, mute indicator etc.. which are always with a white background..

    How do I get a full screen background in 2day?
    Hi,

    You can use JPEG pics from your PC.
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  11. #1371  
    Quote Originally Posted by kennymobley
    Shimon,

    I just tried it again. I created a new todo and selected a category and priority. The todo is created in unfiled with a priority of zero. If I go to the todo "Details" in Datebk5, my Treo soft resets.

    As a workaround, in Datebk5, I can change the priority by using the stylus and tapping on the "0." I can change the category by using the pop-up menu and selecting "Set Category."

    Kenny
    Are you using any of the Pimlico utilities: deletepims.prc or forcepims.prc ?
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  12. #1372  
    Quote Originally Posted by TAKEphONE
    Hi,

    You can use JPEG pics from your PC.
    Thank you. I resized a jpeg to 320x320 and now it covers the whole screen.
    --
    Aloke
    Cingular GSM
    Software:Treo650-1.17-CNG
    Firmware:01.51 Hardware:A
  13. #1373  
    No...I am not using those utilities.
  14. #1374  
    Shimon, Have you by anychance had time to look into this? I'm wondering if it is just something on my device/setup (Treo 650 cdma), or if it's something that others would see also:

    "The second thing is that for whatever reason (perhaps user error?) I don't seem to be able to get Agendus Pro and 2day to play well together with the datebook button. I want to be able to press the datebook button and switch between 2day and different views of Agendus Pro. Everything works fine as long as I don't edit an item in agendus via first going through 2day. If I go into 2day and edit an item and select "open" (which will then open the item in agendus pro) and then make changes to it in agendus, it seems to some how confuse agendus/2day when it comes to changing views with the datebook button. After this, it will switch between 2day and agendus pro, but once it gets to agendus pro, it just gets stuck in the "contacts" portion of agendus pro (and the datebook button doesn't switch views or change back to 2day). If you have any suggestions or fixes it would be appreciated."
  15. #1375  
    Hi,

    Just tested this out.
    it seems Agendus will not let me do this - they take over the button and will not let me alter it's behaviour while insode Agendus.

    Sorry...
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  16. #1376  
    Quote Originally Posted by kennymobley
    No...I am not using those utilities.
    Hi,

    Would you be willing to help me debug this ?
    If so - I suggest we take this offline (my email is contact@shsh.com),
    and publish the results here.

    Thanks.
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  17. #1377  
    Hi all,

    Just posted a new version - 1.31 (12p) - at www.shsh.com/beta

    - TINY FONTS ! When using tiny fonts lines are now smaller !
    (and screen is arranged a bit differently).

    - To do with old PIM: Fix for creating todo on devices with the
    old PIM (e.g. Treo 600 )

    - Email: Handle groups (email addresses separated by a ; or ,).

    Thanks !
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  18. #1378  
    Looks great! The high-res mode is really useful.

    Suggestion: I have a number of to-do's with due date of today, and alarms at various times (I use Datebk5).

    2day lists them at the top with a red "Due". Is it possible to list the time at which the alarm is set instead? "Due" isn't as useful as having the time at which I was supposed to make that phone call, do the errand etc ....
    --
    Aloke
    Cingular GSM
    Software:Treo650-1.17-CNG
    Firmware:01.51 Hardware:A
  19. #1379  
    VM icon causing reset:

    With ver 1.31 (12p):

    I got a VM. I got notified by Alert Manager, got the icon in the Phone application and in 2day.

    I tapped on the icon in the Phone application, listened to my VM, deleted the VM from the Cingular system. The icon disappeared from the Phone app. The Alert Manager shows no alerts anymore.

    2day is still showing the VM icon. Tapping it brings up the dialog box to either call VM or just remove the icon. I choose to call VM from this dialog box (from 2day).

    Soft reset in 2day (according to #*377).

    After the reset, teh VM icon in 2day is still there. Tapping it and choosing to call VM causes resets repeatably. Crash Pro gives the reason as:

    Crash was caused by error "Form68K.c, Line:4665, Form shouldn't move" while running "2day 1.31"

    This time I tapped the VM icon in 2day and chose to "just turn off". The VM icon is gone from 2day and things are back to normal....
    --
    Aloke
    Cingular GSM
    Software:Treo650-1.17-CNG
    Firmware:01.51 Hardware:A
  20. #1380  
    Quote Originally Posted by aprasad
    Looks great! The high-res mode is really useful.

    Suggestion: I have a number of to-do's with due date of today, and alarms at various times (I use Datebk5).

    2day lists them at the top with a red "Due". Is it possible to list the time at which the alarm is set instead? "Due" isn't as useful as having the time at which I was supposed to make that phone call, do the errand etc ....
    I will check it out.

    Thanks.
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com

Posting Permissions