Page 67 of 170 FirstFirst ... 1757626364656667686970717277117167 ... LastLast
Results 1,321 to 1,340 of 3383
  1. #1321  
    Quote Originally Posted by aprasad
    I got a reset while doing the following:

    Listening to ptunes on a wired set. Start Phone, dial voicemail (I had 1 unheard msg). Listened to my VM, dialed 7 (using the touch screen keypad) to delete it, pressed cancel to get rid of the on-screen keypad.

    Soft reset

    #*377 blamed 2day.

    Keytest dbg log says

    10 10
    9 ff
    29 ff
    27 ff
    18 ff
    19 ff
    1 1
    19 ff
    1 0
    18 ff

    Num 101

    Since VM monitoring doesn't work (2day or Butler) on my Cingular phone, I'm turning it off (it was already off in Butler). Maybe this is the Saved Pref corruption?

    2day seems to be the favourite target of #*377 :-)
    Thanks.

    Can you tell me what was the exact error message (both when the reset occured - was there a message ?, and with the #*377 ?)
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  2. #1322  
    Quote Originally Posted by aprasad
    I got a reset while doing the following:

    Listening to ptunes on a wired set. Start Phone, dial voicemail (I had 1 unheard msg). Listened to my VM, dialed 7 (using the touch screen keypad) to delete it, pressed cancel to get rid of the on-screen keypad.

    Soft reset

    #*377 blamed 2day.

    Keytest dbg log says

    10 10
    9 ff
    29 ff
    27 ff
    18 ff
    19 ff
    1 1
    19 ff
    1 0
    18 ff

    Num 101

    Since VM monitoring doesn't work (2day or Butler) on my Cingular phone, I'm turning it off (it was already off in Butler). Maybe this is the Saved Pref corruption?

    2day seems to be the favourite target of #*377 :-)
    BTW - you say you do not get the Voicemail icon turned on ?
    Can you send me the "Dbg log" right after you get a new voicemail notification ?
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  3. #1323  
    The reset was a soft reset .. no messages. I was in the Phone application . then BAM! the Palmone logos etc

    The #*377 message is the same as always

    A reset was caused on 5/17/05 at 3:38 pm while running "2day": Fatal Exception

    I have Crash Pro 2.17 from 79bmedia GmbH installed but that has almost never trapped the resets. It just says that it was a "Soft Reset" and provides no details.

    The only thing I can go by is #*377
    --
    Aloke
    Cingular GSM
    Software:Treo650-1.17-CNG
    Firmware:01.51 Hardware:A
  4. #1324  
    Quote Originally Posted by aprasad

    Since VM monitoring doesn't work (2day or Butler) on my Cingular phone, I'm turning it off (it was already off in Butler). Maybe this is the Saved Pref corruption?

    2day seems to be the favourite target of #*377 :-)
    Sure sounds like what I was having. Make a backup of your saved prefs then delete it and see what happens - if no change then restore your prefs. I bet it will work after you delete and before you restore. If so, it may be worth the few minutes it takes to rebuild the prefs. (Maybe more than a few - depends on how many apps need reregistering)

    -X
    Xathros

    SprintPCS 650 since Nov 2004
  5. #1325  
    Hi all,

    I think I may be on to something.
    No need to restore the saved prefs file !

    Please download and install the new build - 1.31 (12c) - at www.shsh.com/beta

    Let me know if it solved the issues:
    - Reset reported by aprasad.
    - White screen reported by TheTreoGuy.
    - Not reporting voicemail ON/Off in icon.

    Thanks !
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  6. dwman's Avatar
    Posts
    896 Posts
    Global Posts
    907 Global Posts
    #1326  
    VM icon now disappears after checking VM. Always on the ball, Shimon. Thanks.
  7. #1327  
    ver 1.31 (12c) VM monitoring is working for me now !!
    --
    Aloke
    Cingular GSM
    Software:Treo650-1.17-CNG
    Firmware:01.51 Hardware:A
  8. #1328  
    Great !

    Thanks for helping !
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  9. #1329  
    Hi all,

    New 2day version - 1.31 (12e) at www.shsh.com/beta

    - Completed integration with new PIM databases - for faster launch & work. Also show various Outlook fields (location, attendees, alarm on tasks...).

    - Ability to use built-in calendar agenda background (for even faster graphics) (where applicable).

    - Treo: voicemail monitoring - without TAKEphONE !

    - Treo: shortcuts as letters (not digits).

    - Datebook5 integration improvments.

    - i500 dialing fix.

    - More...
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  10. #1330  
    Thanks!!

    2day has been working great lately.

    I notice that the 5-way rocker switch is not very useful in the Preferences screens. Is that normal?
    --
    Aloke
    Cingular GSM
    Software:Treo650-1.17-CNG
    Firmware:01.51 Hardware:A
  11. #1331  
    Quote Originally Posted by aprasad
    Thanks!!

    2day has been working great lately.

    I notice that the 5-way rocker switch is not very useful in the Preferences screens. Is that normal?
    Yes - with all those options over there, it would take considerable time to sort the navigation order and stuff... I decided it's better to use that time to add more features...
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  12. #1332  
    Shimon, I'm using 2day 1.31 (12e) and it's working very well with the exception of 2 things I'm noticing. Ok, this first thing is probably a bug. It looks like if I have a "skin" in camera images (in the SD Card) that I'm using for 2day, if I take out the SD card and then put the SD card back in, I lose my "skin." It is important to note that this only happens if I switch over to 2day while the SD card is not in the device (it looks like it reverts to the standard 2day skin). So when I put the sd card back in the Treo650, my skin doesn't automatically come back. I have to go back to the 2day preferences and choose it once again. Again, this only happens if I switch to 2day while the sd card is not in the device.

    The second thing is that for whatever reason (perhaps user error?) I don't seem to be able to get Agendus Pro and 2day to play well together with the datebook button. I want to be able to press the datebook button and switch between 2day and different views of Agendus Pro. Everything works fine as long as I don't edit an item in agendus via first going through 2day. If I go into 2day and edit an item and select "open" (which will then open the item in agendus pro) and then make changes to it in agendus, it seems to some how confuse agendus/2day when it comes to changing views with the datebook button. After this, it will switch between 2day and agendus pro, but once it gets to agendus pro, it just gets stuck in the "contacts" portion of agendus pro (and the datebook button doesn't switch views or change back to 2day). If you have any suggestions or fixes it would be appreciated.
  13. #1333  
    Quote Originally Posted by TAKEphONE
    Hi all,

    New 2day version - 1.31 (12e) at www.shsh.com/beta

    - Ability to use built-in calendar agenda background (for even faster graphics) (where applicable).
    hi shimon,
    got the latest version. excellent!

    but, (sorry if i missed anything... )

    1. could u please add an alarm setting feature in 'To Do'
    2. can we adjust the background tranparency level?

    Thank you.
  14. #1334  
    Quote Originally Posted by paulsjmail
    Shimon, I'm using 2day 1.31 (12e) and it's working very well with the exception of 2 things I'm noticing. Ok, this first thing is probably a bug. It looks like if I have a "skin" in camera images (in the SD Card) that I'm using for 2day, if I take out the SD card and then put the SD card back in, I lose my "skin." It is important to note that this only happens if I switch over to 2day while the SD card is not in the device (it looks like it reverts to the standard 2day skin). So when I put the sd card back in the Treo650, my skin doesn't automatically come back. I have to go back to the 2day preferences and choose it once again. Again, this only happens if I switch to 2day while the sd card is not in the device.

    The second thing is that for whatever reason (perhaps user error?) I don't seem to be able to get Agendus Pro and 2day to play well together with the datebook button. I want to be able to press the datebook button and switch between 2day and different views of Agendus Pro. Everything works fine as long as I don't edit an item in agendus via first going through 2day. If I go into 2day and edit an item and select "open" (which will then open the item in agendus pro) and then make changes to it in agendus, it seems to some how confuse agendus/2day when it comes to changing views with the datebook button. After this, it will switch between 2day and agendus pro, but once it gets to agendus pro, it just gets stuck in the "contacts" portion of agendus pro (and the datebook button doesn't switch views or change back to 2day). If you have any suggestions or fixes it would be appreciated.
    Hi,

    Regarding the first one - dont think I can fix this - if you launch 2day, and the skin is not there (SD is out) - I have no other choice then to default to the default skins - otherwise I will have to look for the specific skin on an SD each time you launch 2day, which will slow down launching all the time...

    I will try to fix theAgendus views issue.

    Thanks !
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  15. #1335  
    Quote Originally Posted by ibnujang
    hi shimon,
    got the latest version. excellent!

    but, (sorry if i missed anything... )

    1. could u please add an alarm setting feature in 'To Do'
    2. can we adjust the background tranparency level?

    Thank you.
    Hi,

    Sorry, but afraid for now I can not afford the time to add this - you can use the "Goto >" button to jump to editing the new task in details.

    Regarding background transparency - I am trying to figure out how it can be done. Still have not found the functions in the SDK...

    Thanks !
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  16. #1336  
    Quote Originally Posted by TAKEphONE
    Hi,

    Regarding the first one - dont think I can fix this - if you launch 2day, and the skin is not there (SD is out) - I have no other choice then to default to the default skins - otherwise I will have to look for the specific skin on an SD each time you launch 2day, which will slow down launching all the time...

    I will try to fix theAgendus views issue.

    Thanks !
    Shimon, regarding the 2day skin, it's probably not worth spending time on because I can just move the picture over to the Treo's internal memory (and everything works fine).

    The Agendus issue is far more important and I really appreciate you taking a look at this.
  17. #1337  
    Just started using 2Day. Fantastick app especially 4stocks integration.
    I am trying to hide some datebook 5 items in the 2day display. Specifically, I would just like to display the items in my Main datebook5 display, but all items and categories appear as they would in the standard Palm one calendar application. I have a call schedule set up to only show my own on call dates in the main date book display, but I end up getting the entire on call schedule in 2day. Is there any way to hide these or filter out certain datebook5 appt categories as is done with the to do categories?
  18. #1338  
    Quote Originally Posted by phillydog
    Just started using 2Day. Fantastick app especially 4stocks integration.
    I am trying to hide some datebook 5 items in the 2day display. Specifically, I would just like to display the items in my Main datebook5 display, but all items and categories appear as they would in the standard Palm one calendar application. I have a call schedule set up to only show my own on call dates in the main date book display, but I end up getting the entire on call schedule in 2day. Is there any way to hide these or filter out certain datebook5 appt categories as is done with the to do categories?
    Hi,

    What version of 2day are you using ?
    The latest (at www.shsh.com/beta) has datebook categories.
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  19. #1339  
    version 1.31 beta
  20. #1340  
    Fixed it with 12e. Was using 9 before. Thanks for the quick response.

Posting Permissions