Results 1 to 11 of 11
  1.    #1  
    I am sure there is a convenient way to
    1. dial the calling card local number.
    2. punch in the pin number
    3. dial the long distance number

    on the treo 600. Question is how do you do it? How do I insert the delays etc? Sorry if this is a dumb question and if it is already in the manual. I looked but couldn't find it.

    Thanks
  2. #2  
    As far as I know it's not possible using the built in Dialer.

    But TAKEphONE (www.shsh.com) has such a feature and it works great on my Treo 600. It is a smart-dialing-card feature that choose the right card/acess-number/password based on your destination number (like if you call domestic it can use one card and another for international).

    And well, it's only one of the 100s features.
    Right after Agendus Pro it's the second most used app on my Treo
  3. #3  
    I just started using TakePhone, and am looking for a similar calling card solution. In the case of my calling card, I need to...

    1. Dial 10 digit calling card number
    2. Enter phone number I intend to call
    3. Enter a 14 digit (PIN) number

    Any ideas on how to accomplish this with TakePhone?

    CGordonn
  4. #4  
    You can set this up using the favorites in the regular phone app . When setting up a favorite speed dial , click on More and then put the extra digits ..for your calling card number pin etc. You can insert pause by using , (comma). Also select the "Dial Extra digits Automatically" checkbox.

    Btw, I also use this for dialing international and also to check my voicemail at work (sorta like one button voicemail).
  5. #5  
    Quote Originally Posted by cgordonn
    I just started using TakePhone, and am looking for a similar calling card solution. In the case of my calling card, I need to...

    1. Dial 10 digit calling card number
    2. Enter phone number I intend to call
    3. Enter a 14 digit (PIN) number

    Any ideas on how to accomplish this with TakePhone?

    CGordonn
    Define a script like "800xxxxxxxpNpzzzzzzzzzz"
    where 800xxxxxxx is the call-card number
    and zzzzzzzz is your PIN
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  6. #6  
    Quote Originally Posted by TAKEphONE
    Define a script like "800xxxxxxxpNpzzzzzzzzzz"
    where 800xxxxxxx is the call-card number
    and zzzzzzzz is your PIN

    Thanks. But how do I incorporate these instructions with the calling card feature of TakePhone?

    CGordonn
  7. #7  
    Can you give more details - for what numbers do you want to use this call-card ? (how do they start)

    And how do you dial those numbers ?
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  8. #8  
    Quote Originally Posted by TAKEphONE
    Can you give more details - for what numbers do you want to use this call-card ? (how do they start)

    And how do you dial those numbers ?
    I am in the US and my boss is in the UK. When I need to call him from my SPCS phone, I use my corporate calling card. The calling card number is 10 digits, 800-xxx-xxxx. I then get a voice prompt asking me to enter the number I am calling, in this case its a UK number, 011-44-xxxx-xxxxxx. I then get a voice prompt asking me to enter my authorization number (PIN), which is a 14 digit number.

    So, I call the calling card number 1st, enter the destination phone number 2nd and my 14 digit PIN 3rd. What is the correct way to coordinate this with my bosses contact information in my Treo 600 and the calling card feature in TakePhone? All the instructions I have seen so far call the calling card number, enter the PIN and then enter the destination phone number.

    CGordonn
  9. #9  
    So you should define:

    Rule1: 011

    Script: 8001234567xNx<14 digit PIN>
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  10. #10  
    Quote Originally Posted by TAKEphONE
    So you should define:

    Rule1: 011

    Script: 8001234567xNx<14 digit PIN>
    That worked!

    CGordonn
  11. #11  
    It seems like takephone added a lot to pre-600 treos, but the built-in dialer has come a long way, and the only really important feature it's missing seems to be extra digits in dialing.

    Maybe takephone will introduce a hack utility that just enables the comma in regular contact entries?

Posting Permissions