Page 2 of 2 FirstFirst 12
Results 21 to 33 of 33
  1. #21  
    >pilot-xfer -p /dev/ttyUSB1 -l

    Listed stuff on my Treo, very cool, making progress. Still got to figure out the issues with why usb thinks its storage, back to google...

    L
  2. #22  
    Hi all,

    I'm stuck with the SuSE 2.4.19 kernel right now. (No options for updating or recompiling at the moment...)

    What would be the quickest way for me to get the visor module update so I can sync my Treo 600?

    Right now, I get the following error in the messages file:

    "...(vend/prod 0x82d/0x300) is not claimed by any active driver."

    I'm assuming if I could just get the visor.o module hacked to replace the visor 0x100 product code with 0x300 for the Treo 600, everything would work? Could I just drop the visor.o file from someone else's system into mine?

    Thanks for any help/suggestions!
    rjb
  3. #23  
    Hi folks,

    I managed to get visor.c recompiled and can now use pilot-xfer with my t600.

    I then tried to recompile gnome-pilot from the 2.0.10 source pulled from http://ftp.gnome.org/pub/GNOME/sources/gnome-pilot/2.0/ and that is where I am running into trouble.

    Did a "./configure" first... then a "make" and then the compile seems to die in the gpilotd subdirectory. Can anyone offer any advise? All I need is the replacement gpilotd file and that's what seems to not be compiling? Here's the errors I get when the compile dies:

    Making all in gpilotd
    make[2]: Entering directory `/users/rb39837/Documents/gpilot/gnome-pilot-2.0.10/gpilotd'
    /usr/bin/orbit-idl-2 ../idl/gnome-pilot.idl
    orbit-idl-2 2.6.3 compiling
    mode, show preprocessor errors, passes: stubs skels common headers skel_impl imodule

    sh: line 1: indent: command not found
    make[2]: *** [gnome-pilot-common.c] Broken pipe
    make[2]: Leaving directory `/users/rb39837/Documents/gpilot/gnome-pilot-2.0.10/gpilotd'
    make[1]: *** [all-recursive] Error 1
    make[1]: Leaving directory `/users/rb39837/Documents/gpilot/gnome-pilot-2.0.10'
    make: *** [all-recursive-am] Error 2

    thanks for any help!
    rjb
  4. #24  
    Sounds like you don't have 'indent' installed. If you are running red hat, try 'rpm -q indent'

    I get

    [jt@jtrostel jt]$ rpm -q indent
    indent-2.2.9-2

    You should be able to get an rpm from the rpm repositories... (google 'rpm repository').

    Does 'locate indent' show anything?
    mine shows /usr/bin/indent (among a billion others)

    If you are running debian, I'll bet there's an apt package.

    Otherwise, http://www.gnu.org/software/indent/indent.html
    and compile, install from source...
  5. #25  
    Thank you!!!

    rjb
  6. Danitaz's Avatar
    Posts
    295 Posts
    Global Posts
    296 Global Posts
    #26  
    Originally posted by rjbeep
    Hi folks,

    I managed to get visor.c recompiled and can now use pilot-xfer with my t600.
    Oooooooh - could you help me with this??? I'm a total neophite with Linux - have just put SuSE 9.0 Pro on my notebook and need to figure out synching for the Treo.

    Any assistance greatly appreciated - if I try pilot-xfer I just get a "port not connected" error.

    Thanks.

    Danita
  7. #27  
    Hi, can anyone send me (via PM) information on how to get Linux on my GSM Treo 600? Would that environment provide PIM tools? Office-like doc support? multi-tasking? hard-button support? camera support?

    If I am unhappy with the Linux environment? Would it be easy just to return to the Palm OS? Would this risk the loss of warranty on the hardware?

    I have been a UNIX/Linux guy on the server but have never tried this on a PDA yet.
  8. #28  
    Err, they are talking about using Linux as the HotSync host, not running Linux ON the Treo.
  9. #29  
    Oh ... (tip toeing myself out of the thread)
  10. #30  
    Hi All,

    I have my treo 600 working on Suse 9.0 by just adding the following to /etc/rc.d/boot.local
    modprobe visor vendor=0x82d product=0x300

    No need to recompile.

    I can hotsync fine, but I am having some trouble...

    I want to set up a ppp connection, so I can use my PCs network connection on the treo.

    This works fine, and I can ping between the devices, but pings of more than around 80
    bytes fail,as does any packet of more than 8 bytes, so no network traffic is possible!

    Does anyone have this working?

    Thanks,
    Tim
  11. #31  
    I have the Treo mostly working with NetBSD. The problem we run into is that there's two protocols in the uvisor driver; one is for Palm 4 devices, and one is the historical Visor protocol.

    My Treo works only with the Visor protocol. Other people's Treos appear to work only with the Palm 4 protocol. We have not been able to figure out how to tell which is which. Anyone else seen this?
  12. #32  
    I think you need kernel version 2.6 to be able to compile only modules... However, I added the required lines myself to the source files and compiled the kernel with the old settings without problems, and the Treo was instantly recognised and works nicely with KPilot.

    The patch is listed here:

    https://bugzilla.redhat.com/bugzilla....cgi?id=106654

    Arild

    Quote Originally Posted by rjbeep
    Hi all,

    I'm stuck with the SuSE 2.4.19 kernel right now. (No options for updating or recompiling at the moment...)

    What would be the quickest way for me to get the visor module update so I can sync my Treo 600?

    Right now, I get the following error in the messages file:

    "...(vend/prod 0x82d/0x300) is not claimed by any active driver."

    I'm assuming if I could just get the visor.o module hacked to replace the visor 0x100 product code with 0x300 for the Treo 600, everything would work? Could I just drop the visor.o file from someone else's system into mine?

    Thanks for any help/suggestions!
    rjb
  13. #33  
    ...any suggestions appreciated

    Suse 10.1, default 2.6.16.13-4 kernel.

    pilot-xfer -p /dev/ttyUSB1 -l

    gives me

    Listening to port: /dev/ttyUSB1

    Please press the HotSync button now...

    and nothing else before the HotSync times out.

    /var/log/messages shows the following (after several HotSync attempts):

    Jun 3 08:39:41 korolev kernel: usb 2-1: new full speed USB device using uhci_hcd and address 2
    Jun 3 08:39:41 korolev kernel: usb 2-1: new device found, idVendor=082d, idProduct=0300
    Jun 3 08:39:41 korolev kernel: usb 2-1: new device strings: Mfr=1, Product=2, SerialNumber=5
    Jun 3 08:39:41 korolev kernel: usb 2-1: Product: Palm Handheld
    Jun 3 08:39:41 korolev kernel: usb 2-1: Manufacturer: Palm, Inc.
    Jun 3 08:39:41 korolev kernel: usb 2-1: SerialNumber: PalmSN12345678
    Jun 3 08:39:41 korolev kernel: usb 2-1: configuration #1 chosen from 1 choice
    Jun 3 08:39:42 korolev kernel: usbcore: registered new driver usbserial
    Jun 3 08:39:42 korolev kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
    Jun 3 08:39:42 korolev kernel: usbcore: registered new driver usbserial_genericJun 3 08:39:42 korolev kernel: drivers/usb/serial/usb-serial.c: USB Serial Driver core
    Jun 3 08:39:42 korolev kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for Handspring Visor / Palm OS
    Jun 3 08:39:42 korolev kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for Sony Clie 3.5
    Jun 3 08:39:42 korolev kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for Sony Clie 5.0
    Jun 3 08:39:42 korolev kernel: visor 2-1:1.0: Handspring Visor / Palm OS converter detected
    Jun 3 08:39:42 korolev kernel: usb 2-1: Handspring Visor / Palm OS converter now attached to ttyUSB0
    Jun 3 08:39:42 korolev kernel: usb 2-1: Handspring Visor / Palm OS converter now attached to ttyUSB1
    Jun 3 08:39:42 korolev kernel: usbcore: registered new driver visor
    Jun 3 08:39:42 korolev kernel: drivers/usb/serial/visor.c: USB HandSpring Visor / Palm OS driver
    Jun 3 08:41:57 korolev kernel: usb 2-1: USB disconnect, address 2
    Jun 3 08:41:57 korolev kernel: visor ttyUSB0: Handspring Visor / Palm OS converter now disconnected from ttyUSB0
    Jun 3 08:41:57 korolev kernel: visor ttyUSB1: Handspring Visor / Palm OS converter now disconnected from ttyUSB1
    Jun 3 08:41:57 korolev kernel: visor 2-1:1.0: device disconnected
    Jun 3 08:43:33 korolev kernel: usb 2-1: new full speed USB device using uhci_hcd and address 3
    Jun 3 08:43:34 korolev kernel: usb 2-1: new device found, idVendor=082d, idProduct=0300
    Jun 3 08:43:34 korolev kernel: usb 2-1: new device strings: Mfr=1, Product=2, SerialNumber=5
    Jun 3 08:43:34 korolev kernel: usb 2-1: Product: Palm Handheld
    Jun 3 08:43:34 korolev kernel: usb 2-1: Manufacturer: Palm, Inc.
    Jun 3 08:43:34 korolev kernel: usb 2-1: SerialNumber: PalmSN12345678
    Jun 3 08:43:34 korolev kernel: usb 2-1: configuration #1 chosen from 1 choice
    Jun 3 08:43:34 korolev kernel: visor 2-1:1.0: Handspring Visor / Palm OS converter detected
    Jun 3 08:43:34 korolev kernel: usb 2-1: Handspring Visor / Palm OS converter now attached to ttyUSB0
    Jun 3 08:43:34 korolev kernel: usb 2-1: Handspring Visor / Palm OS converter now attached to ttyUSB1
    Jun 3 08:45:27 korolev kernel: usb 2-1: USB disconnect, address 3
    Jun 3 08:45:27 korolev kernel: visor 2-1:1.0: device disconnected Jun 3 08:45:36 korolev kernel: usb 2-1: new full speed USB device using uhci_hcd and address 4 Jun 3 08:45:36 korolev kernel: usb 2-1: new device found, idVendor=082d, idProduct=0300 Jun 3 08:45:36 korolev kernel: usb 2-1: new device strings: Mfr=1, Product=2, SerialNumber=5
    Jun 3 08:45:36 korolev kernel: usb 2-1: Product: Palm Handheld
    Jun 3 08:45:36 korolev kernel: usb 2-1: Manufacturer: Palm, Inc.
    Jun 3 08:45:36 korolev kernel: usb 2-1: SerialNumber: PalmSN12345678
    Jun 3 08:45:36 korolev kernel: usb 2-1: configuration #1 chosen from 1 choice
    Jun 3 08:45:36 korolev kernel: visor 2-1:1.0: Handspring Visor / Palm OS converter detected Jun 3 08:45:36 korolev kernel: usb 2-1: Handspring Visor / Palm OS converter now attached to ttyUSB2
    Jun 3 08:45:36 korolev kernel: usb 2-1: Handspring Visor / Palm OS converter now attached to ttyUSB3
    Jun 3 08:47:30 korolev kernel: usb 2-1: USB disconnect, address 4
    Jun 3 08:47:30 korolev kernel: visor ttyUSB2: Handspring Visor / Palm OS converter now disconnected from ttyUSB2
    Jun 3 08:47:30 korolev kernel: visor ttyUSB3: Handspring Visor / Palm OS converter now disconnected from ttyUSB3
    Jun 3 08:47:30 korolev kernel: visor 2-1:1.0: device disconnected
    Jun 3 08:47:36 korolev kernel: usb 2-1: new full speed USB device using uhci_hcd and address 5
    Jun 3 08:47:36 korolev kernel: usb 2-1: new device found, idVendor=082d, idProduct=0300
    Jun 3 08:47:36 korolev kernel: usb 2-1: new device strings: Mfr=1, Product=2, SerialNumber=5
    Jun 3 08:47:36 korolev kernel: usb 2-1: Product: Palm Handheld
    Jun 3 08:47:36 korolev kernel: usb 2-1: Manufacturer: Palm, Inc.
    Jun 3 08:47:36 korolev kernel: usb 2-1: SerialNumber: PalmSN12345678
    Jun 3 08:47:36 korolev kernel: usb 2-1: configuration #1 chosen from 1 choice
    Jun 3 08:47:36 korolev kernel: visor 2-1:1.0: Handspring Visor / Palm OS converter detected
    Jun 3 08:47:36 korolev kernel: usb 2-1: Handspring Visor / Palm OS converter now attached to ttyUSB2
    Jun 3 08:47:36 korolev kernel: usb 2-1: Handspring Visor / Palm OS converter now attached to ttyUSB3
    Jun 3 08:49:52 korolev kernel: usb 2-1: USB disconnect, address 5
    Jun 3 08:49:52 korolev kernel: visor ttyUSB2: Handspring Visor / Palm OS converter now disconnected from ttyUSB2
    Jun 3 08:49:52 korolev kernel: visor ttyUSB3: Handspring Visor / Palm OS converter now disconnected from ttyUSB3
    Jun 3 08:49:52 korolev kernel: visor 2-1:1.0: device disconnected
Page 2 of 2 FirstFirst 12

Posting Permissions