Page 2 of 4 FirstFirst 1234 LastLast
Results 21 to 40 of 79
  1. #21  
    Shimon,

    Every time I start take Phone the voice mail alert starts, even if I don't have Vmail. I turn it off but it comes back no matter what, needless to say it's a little annoying and I'm using minutes to call to find out I have no voice mail.
    Palm I >Palm IIIi>Palm 505> Zire 71>PEG37>T|X>TREO 700P That's a lot of palming!!
  2. twitch3's Avatar
    Posts
    821 Posts
    Global Posts
    860 Global Posts
    #22  
    Quote Originally Posted by maninrochester View Post
    Shimon,

    Every time I start take Phone the voice mail alert starts, even if I don't have Vmail. I turn it off but it comes back no matter what, needless to say it's a little annoying and I'm using minutes to call to find out I have no voice mail.
    Is it on in the phone app too? I have this problem with Sprint. The VM indicator sticks so I manually have to clear it in the phone app, Menu-A, and also in TP.
  3. #23  
    I'll try that but I didn't have that problem until I upgraded to build 052 (I think that's the right version). I'm also getting a lot of resets in this app. Especially when I switch to ChatterEmail from Take phone (when I have an alert for a message) and/or when I get an incoming call when I have an alert for a message. I'm using the attention grabber in Butler, I just shut it off to see if that resolves the issue. Both of these "bugs" are pretty annoying. The phone has reset a number of times on an inbound call.
    Palm I >Palm IIIi>Palm 505> Zire 71>PEG37>T|X>TREO 700P That's a lot of palming!!
  4. #24  
    I am also running the latest release of Takephone 7, ChatterEmail and using Butler's attention grabber - not a problem at all. Ben
  5.    #25  
    Quote Originally Posted by maninrochester View Post
    I'll try that but I didn't have that problem until I upgraded to build 052 (I think that's the right version). I'm also getting a lot of resets in this app. Especially when I switch to ChatterEmail from Take phone (when I have an alert for a message) and/or when I get an incoming call when I have an alert for a message. I'm using the attention grabber in Butler, I just shut it off to see if that resolves the issue. Both of these "bugs" are pretty annoying. The phone has reset a number of times on an inbound call.
    Hi,

    I would suggest doing what you just did - disable those apps one by one, to try and figure out the cause.

    TAKEphONE does nothing with incoming calls, so I dare say it may not be related.
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  6. Jozz's Avatar
    Posts
    148 Posts
    Global Posts
    149 Global Posts
    #26  
    Is it possible to disable roaming in TAKEphONE? I'm using a Treo 680 and there have been some changes to the network recently so now my Treo is constantly changing from NL KPN (my privider) to Roaming. In the standard phone application I can change it manually to NL KPN, but the phone keeps changing to roaming. It's really bad for my batterylife.
  7.    #27  
    Quote Originally Posted by Jozz View Post
    Is it possible to disable roaming in TAKEphONE? I'm using a Treo 680 and there have been some changes to the network recently so now my Treo is constantly changing from NL KPN (my privider) to Roaming. In the standard phone application I can change it manually to NL KPN, but the phone keeps changing to roaming. It's really bad for my batterylife.
    Hi,

    Afraid I cant help here...
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  8.    #28  
    Hi all,

    Version 7.00 (064) posted at www.shsh.com/beta

    - Treo 755p: initial support for this new device.

    - i-Bar icons: added support for icons in i-Bar
    (you need to install the icons database/s from the ZIP file).

    - Call-Log: added option to view a contact call history
    (all calls to/from a person) can be used from within the
    call-log screen (or call details), as well as from the main
    FIND screen. Note: this is done by a free-text search of
    the call log, so it only finds calls with the same name.

    - Call-Log: added more actions to the call details screen
    copy ALL details to clipboard, and create a Journal
    entry (DateBk6 style).

    - Misc.: a fix for CDMA phones forwarding status indicator.

    - Misc.: added support Czech accents.

    Thanks !
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  9. #29  
    Quote Originally Posted by TAKEphONE View Post
    Hi all,

    Version 7.00 (064) posted at www.shsh.com/beta
    - Call-Log: added option to view a contact call history
    (all calls to/from a person) – can be used from within the
    call-log screen (or call details), as well as from the main
    FIND screen. Note: this is done by a free-text search of
    the call log, so it only finds calls with the same name.

    - Call-Log: added more actions to the call details screen –
    copy ALL details to clipboard, and create a Journal
    entry (DateBk6 style).

    Thanks !
    Thanks for working on this. I installed tkph700_064.prc in my Treo680 and immediately went to the call history, selected the first call on the list and selected Save to Journal. It worked!
    But every time after that, when I select Save to Journal (for other calls in the history) it reset my phone.
    The phone seems unaffected otherwise.

    Then I made a new call and tried again. It worked -- made a journal entry with the call details duly posted.
    But then I made another new call and tried a journal entry and it reset the phone.

    After several combinations of calls and attempts to journal, I think I have defined the problem -- it will not append to an existing journal.

    The first success actually the last call I made YESTERDAY. When I made a call today, the journal worked, but when I made another call today, it did not.
    I can select a call in the list from any day in the history and create a journal -- but only one. Any attempt to append another call to a day's journal results in a reset.
    I can delete the journal and immediately create a new one, but I cannot add to it.
    Last edited by jmesseder; 05/17/2007 at 07:32 AM.
  10. #30  
    Quote Originally Posted by jmesseder View Post
    I installed (064), only tkph700_064.prc, in my Treo680 and immediately went to the call history, selected the first call on the list (a voicemail call) and selected Save to Journal. It worked!
    But every time after that, when I select Save to Journal (for other calls in the history) it resets my phone.
    The phone seems unaffected otherwise.

    Then I made a new call and tried again. It worked -- made a journal entry with the call details duly posted.
    But then I made another new call and tried a journal entry and it reset the phone...
    Shimon,

    Starting fresh, I can Save to Journal 2 or 3 times in a row without incident, but the next attempt resets my 680 with:"DataMgr.c, Line:8682, DmWrite: DmwriteCheck failed with Err(0x00214)".

    After the reset, I can Save to Journal fewer times before a reset, until eventually the phone resets every time I try it.

    If I then go into DateBk6 and delete those journals, I can Save to Journal again.

    You might want to touch base with CESD.
    V > Vx > m505 > m515 > T/T > T3 > TC > 650 > 680
    <script type="text/javascript" src="http://download.skype.com/share/skypebuttons/js/skypeCheck.js"></script>
    <a href="skype:wwgamble?call"><img src="http://mystatus.skype.com/balloon/wwgamble" style="border: none;" width="150" height="60" alt="My Skype status" /></a>
  11. #31  
    Quote Originally Posted by Bill Gamble View Post
    Shimon,

    Starting fresh, I can Save to Journal 2 or 3 times in a row without incident, but the next attempt resets my 680 with:"DataMgr.c, Line:8682, DmWrite: DmwriteCheck failed with Err(0x00214)".
    Same error I got.
  12. #32  
    Bill, 064 on my Sprint Treo 700p is not resetting after twenty tries. Dang it. Ben
  13. #33  
    I finally got it to execute a soft reset. I was having no problem adding to an existing one. I deleted the existing one and recreated it within dB6 and after putting ten entries in it did a soft reset.

    Ben
  14. gagara02's Avatar
    Posts
    14 Posts
    Global Posts
    16 Global Posts
    #34  
    My main reason for getting TakePhone is to be able to have automatic redial when the number called is busy.

    What do I need to do to implement this? I went into Preferences under Treo and checked the box redial on busy every 5 seconds, 20 times.

    Then went into the redial screen and redialed the number. However, the auto-redial still didn't work...
  15. #35  
    the developer wrote this regarding the 680 model

    Afraid this does not work on the Treo 680 - Palm changed the way the busy (and other telephony events) are reported to 3rd party apps - they are now only reported AFTER the built-in app handles them.

    So - for BUSY - it is reported only after the user closes the "Busy... redial?" system dialog.


    i have the treo 700p and it doesnt work on mine either

    u have the 650 and it doesnt work .....

    not sure if anyone can get this option to work
  16. gagara02's Avatar
    Posts
    14 Posts
    Global Posts
    16 Global Posts
    #36  
    Hmmm. I hope the developer checks back this thread. I would suggest making this function not dependent on "busy", but just to have a redial after, say 5 sec. Then, once you do get an answer, if it redials again, the phone would ask "dial another call?" and even if it doesn't there still a way to cancel further dialing...
  17. #37  
    I really like the "create a journal entry" feature.
    Pilot 5K->Palm IIIc->Tungsten T/T2->Treo 650/680 -> Pre+ (1.4.5 & Uberkernel)
  18. #38  
    Quote Originally Posted by swieder View Post
    I really like the "create a journal entry" feature.
    But have you been able to add to the journal on your 650? And if you have, are you using DateBk6 or the Palm calendar that came installed on the 650. A couple of us are using DateBk and the first time we add to the journal (which creates the journal on the applicable day) it works fine, but the second time (which actually is an attempt to append to a now-existing journal) results in a reset.
  19. #39  
    Quote Originally Posted by twitch3 View Post
    In the mean time, you might want try Call Log+ by Chapura. It not only lets you take notes for a call but syncs with Outlook Journal (Easier Reports)
    http://www.chapura.com/call-log.php
    Unfortunately, I don't use Outlook. I've come close to succumbing a few times, but so far have been able to resist.
  20.    #40  
    Hi all,

    1. Regarding the journal append issue - sorry about that - will try to fix asap.

    2. Regarding the "redial on busy" - should work on the Treo 650, will test again.
    Regarding the suggestion for auto-redial on timer (after 5 secs) - nice idea,
    but I am hesitatnt to do this, since it will bother the user - in most cases
    with no justification

    Thanks all !
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
Page 2 of 4 FirstFirst 1234 LastLast

Posting Permissions