Results 1 to 9 of 9
  1.    #1  
    I am looking at this unit from Cambridge Soundworks:

    http://www.cambridgesoundworks.com/s...&item=c1pdmp3n

    The unit has a mini usb charger as well as standard dc pin. I called Cambridge and they said it is a 5 volt charger. If I were to buy this accessory:

    http://shop.treonauts.com/content/ac...-84--338-6.htm
    (usb charger)

    and use a usb to mini usb connector, will I be able to use the PlayDock to charge the treo as well as play music from it?

    Anyone using the Playdock?
  2. #2  
    The pinouts for the Teo can be found at http://pinouts.ru/PDA/palm_treo650_pinout.shtml

    Ask Cambridge if they match up.
  3. #3  
    Quote Originally Posted by MartinTek View Post
    The pinouts for the Teo can be found at http://pinouts.ru/PDA/palm_treo650_pinout.shtml

    Ask Cambridge if they match up.
    The 700p pinouts are differnt from the 650 pinouts for some strange reason.
    Palm has yet to tell anyone why. If the device does not say 700p on it. It will not work with the 700p. I have a 650 headset adapter that works fine on 650's.
    When I plug it in to the 700 I get nothing. There are some car kits that ran into the same problem.
  4. #4  
    I believe the USB pinouts are the same. I don't have a 650 to check but I did toss a voltmeter on my cable and got 5.3 v off the + - pins as shown.
  5. #5  
    The usb part is the same forsure.The difference is that you could connect to the usb connector and get audio on the 600 and 650. On the 700p they dont use the same pins for audio.

    As an example this adapter plugs into the usb connector and works very well on the 650 but dosent work at all on the 700p
    http://affiliate1.smartphoneexperts....ssories/73.htm


    Have you considered using this

    http://shop.treonauts.com/content/ac...12-92--473.htm

    Thisworks with the 700P
    Last edited by Ronald600; 01/19/2007 at 09:17 AM.
  6. hrm
    hrm is offline
    hrm's Avatar
    Posts
    10 Posts
    #6  
    does anyone know what the pinouts are for the 700p that are different? the multi-connector audio adapter that I built for my 650 doesn't work with my 700p unfortuneately. help on the right pins for audio left and right out would be very helpful.
  7. #7  
    Quote Originally Posted by Ronald600 View Post

    Have you considered using this

    http://shop.treonauts.com/content/ac...12-92--473.htm

    Thisworks with the 700P
    According to this reviewer, this unit does not work with the 700p...
  8. adz1966's Avatar
    Posts
    150 Posts
    Global Posts
    170 Global Posts
    #8  
    If anyone has the pinouts for the 700p, could you PM me please. I bought the seidio cradle for the 650, then upgraded to 700 and the cradle doesn't work for audio anymore. I can rewire it if I have the pinouts.
    Thanks in advance.
  9. jc-Treo's Avatar
    Posts
    439 Posts
    Global Posts
    444 Global Posts
    #9  
    Quote Originally Posted by edelweiss View Post
    According to this reviewer, this unit does not work with the 700p...

    I use the Altec-Lansing InMotion all the time with my 700p. For music and charging. There is a speaker phone function that does seem to give an echo, but I have not tested it much.

    If you watch eBay, you might be able to get one for under $100.

Posting Permissions