Page 2 of 2 FirstFirst 12
Results 21 to 38 of 38
  1. #21  
    Installed 1.61 (011) today, and like it so far.

    Couple notes: in Script editing window button "Pause 2 sec." actually sets a timed pause, which can be any number of seconds between 1 and 10, right? Also, the "Ignore N digits" option seems to consider "+" as a digit, i.e. "Number-1" removes just the "+" from "+1212..."

    And a request: it would be nice to be able to set more than one trigger for a card. That is, say, a calling card would be used for numbers starting with XXX, YYY, and ZZZ. I see that this effect can be achieved by duplicating the "cards", but that does not seem like an elegant solution to me.

    Thanks!
    Pilot Pro > 2Mb+IrDA upgrade > Clie T615C > Treo 650
  2.    #22  
    Hi,

    Answer is yes for all your questions.

    I will probably add multiple prefix triggers on next generations.
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  3. #23  
    seems no support for 680 & Centro
    Treo680 + ibm x61s
  4.    #24  
    Quote Originally Posted by quine View Post
    seems no support for 680 & Centro
    Hi,

    What version are you using ?

    The latest is at www.shsh.com/beta

    Thanks.
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  5. #25  
    Thanks for your quick reply.

    Unlocked GSM Treo680 with Custom ROM
    FW: R01.92 SW: Treo680-2.12-APR CC-Cap: 000-000-000 Carrier DB: 561 Hardware: A

    The function of CAPTURE is not valid on my treo680. And according to your post, I installed Butler 4.73 with green key as all in one to active "capture". Then, there is still a little bit of problem that the dialing from contact list will be performed twice when the rule predefined matched.

    Same condition when official ROM.
    Treo680 + ibm x61s
  6. #26  
    Other problems on my Treo680:

    1. If no digits (or the first digit is 9) before <Number> (when no digits ignored in destination number) in dialing script, the predefined rule will be invalid even matched. No same problem with my Treo650 before.

    2. In Extra Digits window "handle only for Contacts app." disappears, then I have to select "scan Contacts database".
    Last edited by quine; 04/06/2008 at 08:56 AM.
    Treo680 + ibm x61s
  7.    #27  
    Hi,

    I am not sure I understand - what is the relation with Butler and the "all in one" thing - CallCards reffers to the PHONE button, not the green button.

    Thanks
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  8. #28  
    The functions of PHONE button on Treo680 is not same completely as on Treo650. On Treo680 the GREEN button assigned to place call or bring up call log while the PHONE button to open phone application as default.

    The setting of "green/phone key as all in one" in Butler makes the GREEN or PHONE button on Treo680 do all above (place call, bring up call log, open phone application) like on Treo650. I've tried and found only "green key as all in one" could active CallCards "Capture" referred to the PHONE button on my Treo680. Initially I had considered the setting of "phone key as all in one" but it failed.

    THX
    Last edited by quine; 04/06/2008 at 08:02 AM.
    Treo680 + ibm x61s
  9. #29  
    But they are the same as the 700 and 755.
  10.    #30  
    Quote Originally Posted by quine View Post
    The functions of PHONE button on Treo680 is not same completely as on Treo650. On Treo680 the GREEN button assigned to place call or bring up call log while the PHONE button to open phone application as default.

    The setting of "green/phone key as all in one" in Butler makes the GREEN or PHONE button on Treo680 do all above (place call, bring up call log, open phone application) like on Treo650. I've tried and found only "green key as all in one" could active CallCards "Capture" referred to the PHONE button on my Treo680. Initially I had considered the setting of "phone key as all in one" but it failed.

    THX
    Doesnt it work without any of the Butler options ?
    Did you try BtnFix ?
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  11. #31  
    I've tried BtnFix but it failed, then I have to install Butler and it works.
    Treo680 + ibm x61s
  12.    #32  
    Quote Originally Posted by quine View Post
    I've tried BtnFix but it failed, then I have to install Butler and it works.
    Hi,

    Sorry to be a nag - failed in what ?
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  13. #33  
    Sorry for no detail: that is, the PHONE button only open phone application instead of "capture". Same condition after BtnFix installed.

    THX
    Treo680 + ibm x61s
  14.    #34  
    Quote Originally Posted by quine View Post
    Sorry for no detail: that is, the PHONE button only open phone application instead of "capture". Same condition after BtnFix installed.

    THX
    Hi,

    Can you describe a "capture" trial ?
    From what app were you trying to capture ?
    How did you do it ?

    Thanks
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  15. #35  
    In memo, SMS input area, contact's note or somewhere else I highlight the digits I want, then press PHONE button. But my Treo680 only open phone application instead of prompting a "dial/SMS" window like Treo650.

    THX
    Last edited by quine; 04/07/2008 at 10:47 AM.
    Treo680 + ibm x61s
  16.    #36  
    Quote Originally Posted by quine View Post
    In memo, SMS input area, contact's note or somewhere else I highlight the digits I want, then press PHONE button. But my Treo680 only open phone application instead of prompting a "dial/SMS" window like Treo650.

    THX
    Hi,

    What version of CallCards are you using ?
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
  17. #37  
    Ver 1.61 (011)
    Treo680 + ibm x61s
  18.    #38  
    Hi,

    Would you run some test builds for me ?

    If so - please email me directly - contact(at)shsh(dot)com

    Thanks
    Shimon Shnitzer
    Maker of TAKEphONE, 2day, 4cast, 2dial & CallCards -
    "Take telephony into your Palm"
    Web: http://www.shsh.com/products
    Blog: http://www.shsh.com/wordpress
    eMail: contact@shsh.com
Page 2 of 2 FirstFirst 12

Posting Permissions