Results 1 to 17 of 17
  1.    #1  
    Hi,

    just a quick note: ZHexen2 , the Hexen2 Port for PalmOS is reported to run on a Treo 700p. The game is very impressive, with probably the best gfx on a mobile phone. You might try it. You will ned UDMH and need to assign 16MB dynamic memory to ZHexen2. You can download the demo files for the game + the engine for PalmOS from
    here.

    Enjoy,
    Henk
    Check out MapTool Pro the best mapping app for all webOS devices!
    Let your kids practice their math101 Math This!
    Best image processing app for all webOS devices? Try ImageWorker Pro
  2. #2  
    well does it work? what about all the other ones like zdoomz and zhexen and zheretic ... any of these work on 700p? and whats up with the Zs ?? whats is the significance of the Z
  3. #3  
    They all work. And quite well I might add.
  4.    #4  
    Z stands for Zodiac... The first port was Quake which was started by skeezix (www.codejedi.com), improved by squidge and finished by yoyofr. Yoyofr did start with the Z-naming, as ZQuake and ZDoomZ first were Zodiac only. Now they all run on every OS 5 device with external memory cards. Some need more memory and CPU power some less. Just check them out, they are all Treo enhanced and should run without problems on a Treo 700p.
    Check out MapTool Pro the best mapping app for all webOS devices!
    Let your kids practice their math101 Math This!
    Best image processing app for all webOS devices? Try ImageWorker Pro
  5. #5  
    Well I need help cause I get all kinds off errors that reset my treo 700p
  6. #6  
    error during timidty initialization
  7.    #7  
    Timidity: Did you install the instruments (EAWPATCH for examples)? You need to check Yoyofr's website for instructions to instal timidity.

    Z-Games: Just disable the music: In the starter, go to "Options" and remove the mark on "music".

    Which game did you try? ZHexen2?

    Regards
    Henk
    Check out MapTool Pro the best mapping app for all webOS devices!
    Let your kids practice their math101 Math This!
    Best image processing app for all webOS devices? Try ImageWorker Pro
  8. wilsonb's Avatar
    Posts
    434 Posts
    Global Posts
    439 Global Posts
    #8  
    Trying to get Hexen2 running on my T3..
    Went to;
    http://www.metaviewsoft.de/en/Softwa...en2/index.html
    and instructions are lack and confusing to say the least.
    Trying to find better directions..

    I downloaded both ;
    * zip
    * src
    and installed on card.
    Installed UDMH and assigned Hexen2 for 16000k
    Run Hexen2 from card\palm\launcher
    starts up emu menu. Config settings.

    Then get;

    The emulation module to run this game is not present.
    OK.
    zhexen2.zdk
    OK.


    Any ideas? Out of all those,
    Which game looks the best and best to play?

    Thanks for any help..
    ============,,,================
    ===========(o o)===============
    =======oOO==(_)==OOo===========
    Treo 755p ;-)
    Tre 700p UPdated..
    Treo650- Sprint custom rom
    Tungsten T3 creative design.
    http://www.WilsonBradley.com
    http://www.myspace.com/wilsonbradley
    AOL screen name; WilsonIsON
    MSN; WilsonIsOn
    Yahoo; Wilson2bw
    ========ooooO==Ooooo==========
    =========( )===( )==========
    ==========\ (====) /===========
    ===========\_)==(_/============
  9. #9  
    I posted more in the other thread where you asked the exact same thing, but check this forum for more detailed installation instructions.
    Visor Edge + VisorPhone -> Samsung i300 -> Treo 300 -> Treo 600 -> Treo 700p -> Treo 755
  10. wilsonb's Avatar
    Posts
    434 Posts
    Global Posts
    439 Global Posts
    #10  
    Quote Originally Posted by CountBuggula View Post
    I posted more in the other thread where you asked the exact same thing, but check this forum for more detailed installation instructions.
    Thanks, I did check that forum for installing Hexen2 instructions without luck... are there any official instructions anywhere?? Or could someone just post quick steps..
    Got it installed with zhexen2 and Hexen2 folders filled.. so one of em worked ;-)
    Who knows which one is needed?

    Using demo pac files, it loads and I configure it...
    I halts at Hexen starting screen, and says
    Object. hc : OBJ_corps1
    <no function>
    No PRECACHE: MODELS>CORPS1.Mdl (sp)
    Host_error: Program Error

    cursor..


    hexen 1.15 (PalmOS)

    Got Duke nukem working.. What games looks the best on palm?

    Any way at all to rotate it 180? Im right handed.. rather have 5-way on right..
    Last edited by Wilsonb; 04/25/2007 at 01:55 AM.
    ============,,,================
    ===========(o o)===============
    =======oOO==(_)==OOo===========
    Treo 755p ;-)
    Tre 700p UPdated..
    Treo650- Sprint custom rom
    Tungsten T3 creative design.
    http://www.WilsonBradley.com
    http://www.myspace.com/wilsonbradley
    AOL screen name; WilsonIsON
    MSN; WilsonIsOn
    Yahoo; Wilson2bw
    ========ooooO==Ooooo==========
    =========( )===( )==========
    ==========\ (====) /===========
    ===========\_)==(_/============
  11. #11  
    By the way the latest zHexen2 version is 1.5, and zHexen, zDoom, and zHeretic are at 2.0. The latest version of zQuake is 2.1. Duke3D is at 1.9f.

    Getting the latest versions might help a little.

    After installing the full version of Hexen2 on your PC, copy the Hexen2 folder to /PALM/Programs/ on your memory card using a card reader, which results in /PALM/Programs/Hexen2/
    Copy all .pak-files into /PALM/Programs/Hexen2/data1, but be sure you don't overwrite any files.

    There may be some special requirements for getting this one working with the demo of Hexen2, as it's only been tested with the full version. Good luck, hope this helped.
    Visor Edge + VisorPhone -> Samsung i300 -> Treo 300 -> Treo 600 -> Treo 700p -> Treo 755
  12. wilsonb's Avatar
    Posts
    434 Posts
    Global Posts
    439 Global Posts
    #12  
    Quote Originally Posted by CountBuggula View Post
    By the way the latest zHexen2 version is 1.5, and zHexen, zDoom, and zHeretic are at 2.0. The latest version of zQuake is 2.1. Duke3D is at 1.9f.

    Getting the latest versions might help a little.

    After installing the full version of Hexen2 on your PC, copy the Hexen2 folder to /PALM/Programs/ on your memory card using a card reader,
    Thank you, this was the important piece that wasn't mentioned.

    Thanks for the update info on latest zHexen2 version is 1.5, and zHexen, zDoom, and zHeretic are at 2.0
    but now looking for them..


    So, is there any way to turn the screen 180? Im right handed.. Or does someone have a an already/documented config file for buttons /etc.. to share?
    ============,,,================
    ===========(o o)===============
    =======oOO==(_)==OOo===========
    Treo 755p ;-)
    Tre 700p UPdated..
    Treo650- Sprint custom rom
    Tungsten T3 creative design.
    http://www.WilsonBradley.com
    http://www.myspace.com/wilsonbradley
    AOL screen name; WilsonIsON
    MSN; WilsonIsOn
    Yahoo; Wilson2bw
    ========ooooO==Ooooo==========
    =========( )===( )==========
    ==========\ (====) /===========
    ===========\_)==(_/============
  13. #13  
    The latest releases, as well as those installation instructions I quoted above can all be found on Metaview's website. Click on the link for each program and look under "Installation".

    The newest versions should all have an option in the launcher to change orientation. Click the "Opts" button, and there is a dropdown in the topleft corner with options such as "Portrait", "Fullscreen", and "Left Hand". One of those should hopefully work for you.

    Have fun with your classic games! This is what makes the Treo really unique and stand out in a crowd of smartphones and crackberries.
    Visor Edge + VisorPhone -> Samsung i300 -> Treo 300 -> Treo 600 -> Treo 700p -> Treo 755
  14. #14  
    Awesome, thanks!
  15. wilsonb's Avatar
    Posts
    434 Posts
    Global Posts
    439 Global Posts
    #15  
    So what's your favorite? & What looks best?
    ============,,,================
    ===========(o o)===============
    =======oOO==(_)==OOo===========
    Treo 755p ;-)
    Tre 700p UPdated..
    Treo650- Sprint custom rom
    Tungsten T3 creative design.
    http://www.WilsonBradley.com
    http://www.myspace.com/wilsonbradley
    AOL screen name; WilsonIsON
    MSN; WilsonIsOn
    Yahoo; Wilson2bw
    ========ooooO==Ooooo==========
    =========( )===( )==========
    ==========\ (====) /===========
    ===========\_)==(_/============
  16. wilsonb's Avatar
    Posts
    434 Posts
    Global Posts
    439 Global Posts
    #16  
    Quote Originally Posted by Wilsonb View Post
    Thank you, this was the important piece that wasn't mentioned.

    Thanks for the update info on latest zHexen2 version is 1.5, and zHexen, zDoom, and zHeretic are at 2.0
    but now looking for them..


    So, is there any way to turn the screen 180?
    SO THAT THE 5-Way is on the right.
    Im right handed.. Or does someone have a an already/documented config file for buttons /etc.. to share?



    ============,,,================
    ===========(o o)===============
    =======oOO==(_)==OOo===========
    Treo 755p ;-)
    Tre 700p UPdated..
    Treo650- Sprint custom rom
    Tungsten T3 creative design.
    http://www.WilsonBradley.com
    http://www.myspace.com/wilsonbradley
    AOL screen name; WilsonIsON
    MSN; WilsonIsOn
    Yahoo; Wilson2bw
    ========ooooO==Ooooo==========
    =========( )===( )==========
    ==========\ (====) /===========
    ===========\_)==(_/============
  17. #17  
    Quote Originally Posted by Wilsonb View Post
    So what's your favorite? & What looks best?
    My favorite? Heretic. Just cuz I loved that game back in the day. Fond memories of playing deathmatch until 6 AM with my friend via serial cable.

    Best looking? Hexen2, although you'll probably need to overclock to get decent framerates.
    Visor Edge + VisorPhone -> Samsung i300 -> Treo 300 -> Treo 600 -> Treo 700p -> Treo 755

Posting Permissions