Page 44 of 46 FirstFirst ... 343940414243444546 LastLast
Results 861 to 880 of 913
  1. #861  
    I have an unlocked Cingular Treo and would like to update to 1.20 (the unlocked version). When I try to update, it gives me an error saying I'm not allowed to update to this version. Is there a workaround?
  2. #862  
    PalmIII > PalmIIIx > PalmIIIxe > TRGPro > Handera 330 > Zire71 > Treo600 > Treo650 > Treo680 > Treo750 > Centro > TreoPro > iPhone 32GB 3GS

  3. #863  
    Quote Originally Posted by robh11
    CraniumFunk and jamesgangut, you guys are doing an amazing job. I've read this thread and as a newbie, am probably asking an obvious question. I have a used unlocked Cingular t650 from ebay. no idea if the unlock was done by Cingular. My phone info says Firmware: 01.05, Software: Treo650-1.04-CNG. I'd love to install your custom 1.20 ENA in msg567. Do I do the Cingular update first, followed by yours? I want to end up with an unlocked phone at the end of this process. any advice most appreciated. Rob
    .....

    Looking for the FAT32 fix? Remove the file FATFS.prc from the custom ROM & replace it with FAT32.prc (Using Shadowmite's T650 ROM Tool)

    A new limitation has been identified in 1.20. In order to hold CarrierDB 255 after Hard Reset, you *must* leave at least 2 languages in ROM. It seems the language selector app after Hard Reset triggers CarrierDB 255 & AmrDecLib to be created from ROM.
    James, what is THE latest Custom ROM you have using Fat32 and removing most of the usually removed items? And, does it take into account this "Fix" with the CarrierDB 255 issue?

    Thanks!
    Apple iPhone 8GB
    Apple 15" Macbook Pro 2.33 Ghz C2D
    Retired Treo 650
  4. #864  
    The ones posted due have seven files needed to trigger the lang selection. You must have done the official updater and have it working before then changing the rom to the custom version. If you have not or can not due the updater than you must put the files in RAM of read this post as an alternative.
    http://discussion.treocentral.com/sh...9&postcount=12
    PalmIII > PalmIIIx > PalmIIIxe > TRGPro > Handera 330 > Zire71 > Treo600 > Treo650 > Treo680 > Treo750 > Centro > TreoPro > iPhone 32GB 3GS

  5. #865  
    James, thanks for the reply. I did the Palm update, then your custom ROM and it appears to be working fine. I don't want to mess around with the ROM tools, and am just happy to have the ones you so graciously posted.

    Thanks again!
    Apple iPhone 8GB
    Apple 15" Macbook Pro 2.33 Ghz C2D
    Retired Treo 650
  6. #866  
    Quote Originally Posted by MacUser
    James, thanks for the reply. I did the Palm update, then your custom ROM and it appears to be working fine. I don't want to mess around with the ROM tools, and am just happy to have the ones you so graciously posted.
    So you did the Palm update from a Windows machine?
  7. #867  
    Quote Originally Posted by odysseus
    So you did the Palm update from a Windows machine?
    Yeah Pretty sad, I know.
    Apple iPhone 8GB
    Apple 15" Macbook Pro 2.33 Ghz C2D
    Retired Treo 650
  8. #868  
    Quote Originally Posted by jamesgangut

    ***If after running this you still have carrier version 249 replace with these versions. Turn radio off delete files and replace.***
    Can I just install the 5 new files over the old ones? I don't know how to delete the old files.

    Thanks
    Apple iPhone 8GB
    Apple 15" Macbook Pro 2.33 Ghz C2D
    Retired Treo 650
  9. #869  
    I added the three files needed to the CC-Cap post linked above. Just save these and hotsync them over. That maybe the easiest way.
    PalmIII > PalmIIIx > PalmIIIxe > TRGPro > Handera 330 > Zire71 > Treo600 > Treo650 > Treo680 > Treo750 > Centro > TreoPro > iPhone 32GB 3GS

  10. #870  
    Hi All,

    Did the Updater this morning. Went ok, after I cleared memory. A few questions.

    Instructions say Versamail will be updated to 3.1F, mine says 3.1E
    It added Rogers MyMail to my Treo. Does anyone use this rather than Versamail and are there any benefits to it.
    Memory seemed to decrease by about 500K, in previous updates, memory increased. (However, MyMail is only 7K)
    Bluetooth is still at 1.0 (W) whatever that means.

    Thanks,

    George in Vancouver
  11. #871  
    Hi
    I would like to upgrade to the stripped 1.20 version, but my phone - a cingular unlocked version purchased over Ebay - says:
    Firmware 01.51
    Software: Treo650 -1.17-CNG
    Hardware: B

    In all of the previous posts, I have seen only mentione of Hardware "A".

    Can anyone tell me what I should do?

    Thanks
    Steve
    Last edited by Staheev; 05/10/2006 at 10:21 AM.
  12. #872  
    Same thing, hardware version does not change software version.
    PalmIII > PalmIIIx > PalmIIIxe > TRGPro > Handera 330 > Zire71 > Treo600 > Treo650 > Treo680 > Treo750 > Centro > TreoPro > iPhone 32GB 3GS

  13. #873  
    tried it, got error "fpl(0005)"
  14. #874  
    More Info:

    What method are you using where do you get the error?
    PalmIII > PalmIIIx > PalmIIIxe > TRGPro > Handera 330 > Zire71 > Treo600 > Treo650 > Treo680 > Treo750 > Centro > TreoPro > iPhone 32GB 3GS

  15. #875  
    I followed the instructions based on the address given in the included readme, that referred me to: http://shadowmite.com/romInstruct.html
    - i ignored the fact that this page referred to cdma firmware
    I moved all of the files and folders in the card's root to a directory named "steve", and copied the palm and rom folders to the root of the card, popped the card in, tapped on the firmware file, saw the box, pressed it, the phone shut down, and I got the error. I tired it again a few times, with the phone off, and got the same error.
  16. #876  
    PalmIII > PalmIIIx > PalmIIIxe > TRGPro > Handera 330 > Zire71 > Treo600 > Treo650 > Treo680 > Treo750 > Centro > TreoPro > iPhone 32GB 3GS

  17. #877  
    PalmIII > PalmIIIx > PalmIIIxe > TRGPro > Handera 330 > Zire71 > Treo600 > Treo650 > Treo680 > Treo750 > Centro > TreoPro > iPhone 32GB 3GS

  18. #878  
    so should I put this folder, plus the ROM folder from the TREO_650_120_ENA_stripped download on the card and update? Or just run the CNG_to_ENA "palm" folder on the card, update with that, and then use the natural palm 1.20 updater?
  19. #879  
    Just ignore everything you did previously.

    Do you want a full version 1.20? If so it is in the fist link I gave and that will do just what you want. If you are going to customize and you want the smaller ROM partition run the CNG_to_ENA.
    PalmIII > PalmIIIx > PalmIIIxe > TRGPro > Handera 330 > Zire71 > Treo600 > Treo650 > Treo680 > Treo750 > Centro > TreoPro > iPhone 32GB 3GS

  20. #880  
    It worked - I think. As of now, 5 minutes later, it seems to be quite stable.
    I installed 120GSM_ENA_Stripped_f32.
    Thanks for your help! (I hope that I won't need it anymore, this time around).
    Steve

Posting Permissions