Page 4 of 9 FirstFirst 123456789 LastLast
Results 61 to 80 of 170
  1. Dragone's Avatar
    Posts
    60 Posts
    Global Posts
    226 Global Posts
    #61  
    Quote Originally Posted by k3dar View Post
    ok, but can you try this command ? for confirm what size is your media, and if you don't have lost space...
    VG #PV #LV #SN Attr VSize VFree
    store 1 9 0 wz--n- 15.27G 0

    Code:
      --- Logical volume ---
      LV Name                /dev/store/root
      VG Name                store
      LV UUID                xtyIVz-1xgT-fZDa-P4w9-55cQ-niJY-kh9ZRF
      LV Write Access        read/write
      LV Status              available
      # open                 1
      LV Size                456.00 MB
      Current LE             57
      Segments               1
      Allocation             inherit
      Read ahead sectors     auto
      - currently set to     256
      Persistent major       254
      Persistent minor       0
      Block device           254:0
       
      --- Logical volume ---
      LV Name                /dev/store/var
      VG Name                store
      LV UUID                IV7ki0-1tyv-1qaR-Z5IQ-Q7lA-WC7b-H3XKhC
      LV Write Access        read/write
      LV Status              available
      # open                 1
      LV Size                64.00 MB
      Current LE             8
      Segments               1
      Allocation             inherit
      Read ahead sectors     auto
      - currently set to     256
      Persistent major       254
      Persistent minor       1
      Block device           254:1
       
      --- Logical volume ---
      LV Name                /dev/store/update
      VG Name                store
      LV UUID                AOopMC-D03p-n8fj-VRSh-5ZUR-89nL-Bb0sgS
      LV Write Access        read/write
      LV Status              available
      # open                 0
      LV Size                16.00 MB
      Current LE             2
      Segments               1
      Allocation             inherit
      Read ahead sectors     auto
      - currently set to     256
      Persistent major       254
      Persistent minor       2
      Block device           254:2
       
      --- Logical volume ---
      LV Name                /dev/store/log
      VG Name                store
      LV UUID                gxGSrn-d9AI-WZ8y-KflA-QqDh-COiA-z63aHU
      LV Write Access        read/write
      LV Status              available
      # open                 1
      LV Size                24.00 MB
      Current LE             3
      Segments               1
      Allocation             inherit
      Read ahead sectors     auto
      - currently set to     256
      Persistent major       254
      Persistent minor       3
      Block device           254:3
       
      --- Logical volume ---
      LV Name                /dev/store/mojodb
      VG Name                store
      LV UUID                9P9RcG-7dCZ-fENa-JttI-avjI-vLCR-RIc3kR
      LV Write Access        read/write
      LV Status              available
      # open                 1
      LV Size                144.00 MB
      Current LE             18
      Segments               1
      Allocation             inherit
      Read ahead sectors     auto
      - currently set to     256
      Persistent major       254
      Persistent minor       4
      Block device           254:4
       
      --- Logical volume ---
      LV Name                /dev/store/filecache
      VG Name                store
      LV UUID                S2DcNm-5TJ7-wYFC-nzU7-oaHY-YtmS-VjB4zq
      LV Write Access        read/write
      LV Status              available
      # open                 1
      LV Size                136.00 MB
      Current LE             17
      Segments               1
      Allocation             inherit
      Read ahead sectors     auto
      - currently set to     256
      Persistent major       254
      Persistent minor       5
      Block device           254:5
       
      --- Logical volume ---
      LV Name                /dev/store/media
      VG Name                store
      LV UUID                dyhTkD-7CiV-1cjE-1D2I-Imc3-bogy-xx95RW
      LV Write Access        read/write
      LV Status              available
      # open                 1
      LV Size                14.33 GB
      Current LE             1834
      Segments               1
      Allocation             inherit
      Read ahead sectors     auto
      - currently set to     256
      Persistent major       254
      Persistent minor       6
      Block device           254:6
       
      --- Logical volume ---
      LV Name                /dev/store/swap
      VG Name                store
      LV UUID                3YzC0h-MdjI-wLsn-iYzY-I1qG-DcLg-uD1gMC
      LV Write Access        read/write
      LV Status              available
      # open                 1
      LV Size                104.00 MB
      Current LE             13
      Segments               1
      Allocation             inherit
      Read ahead sectors     auto
      - currently set to     256
      Persistent major       254
      Persistent minor       7
      Block device           254:7
       
      --- Logical volume ---
      LV Name                /dev/store/fso
      VG Name                store
      LV UUID                Nd93ie-beY9-t2nB-eFmN-bCTB-cBBL-qAeU1n
      LV Write Access        read/write
      LV Status              available
      # open                 0
      LV Size                24.00 MB
      Current LE             3
      Segments               1
      Allocation             inherit
      Read ahead sectors     auto
      - currently set to     256
      Block device           254:8
  2. #62  
    Quote Originally Posted by Dragone View Post
    Code:
      --- Logical volume ---
      LV Name                /dev/store/fso
      VG Name                store
      LV UUID                Nd93ie-beY9-t2nB-eFmN-bCTB-cBBL-qAeU1n
      LV Write Access        read/write
      LV Status              available
      # open                 0
      LV Size                24.00 MB
      Current LE             3
      Segments               1
      Allocation             inherit
      Read ahead sectors     auto
      - currently set to     256
      Block device           254:8
    Ok, the fso partition is still at 24Mb, it seems that even if you tell the script to create a bigger partition, it won't, and of course, when you uncompress the image it won't fit there!!
    Just remember: If I helped you, press the thanks button!

    Owner of: Pre Sprint, Pre Telcel, Pre Plus AT&T, Pre 2 Unlocked, Pixi Plus AT&T, and 2 TouchPads (my Pre3 was stolen so it won't appear again here).
    Needs: Veer (anyone?)
    Apps: Subnet Calculator, FreeCam, PhotoFun, NuttyPad (work in progress)
    HomeBrew: meta-doctor and Messaging Plugins collaborator
    Twitter: @cesarneg
  3. #63  
    Sure.. first created partition of small size, and because doctoring keep this partition, then after try 12GB as Media, then fso store already present and creation skipped...

    And next, look that on Pre2 is media really only 14.33GB, and Makefile need fix as minimal size for media 13.8GB

    Btw: no lost space, LVM is full used.

    Btw: based on
  4. #64  
    Well, I think you have to resize the media and fso volumes by hand, or delete the fso volume and let the makefile do it by its own
    Just remember: If I helped you, press the thanks button!

    Owner of: Pre Sprint, Pre Telcel, Pre Plus AT&T, Pre 2 Unlocked, Pixi Plus AT&T, and 2 TouchPads (my Pre3 was stolen so it won't appear again here).
    Needs: Veer (anyone?)
    Apps: Subnet Calculator, FreeCam, PhotoFun, NuttyPad (work in progress)
    HomeBrew: meta-doctor and Messaging Plugins collaborator
    Twitter: @cesarneg
  5. #65  
    recomended remove using: lvremove /dev/store/fso

    NuttyBunny: can you please check on yours Pre's what is size of media partition ?
  6. Dragone's Avatar
    Posts
    60 Posts
    Global Posts
    226 Global Posts
    #66  
    Is there any way to emulate a Pre 2 ?
    I don't wont to try this untill I have some form of confirm this is going to work.

    The strange things is on SHR you can read that the procedure should work with Pre 2 too .. :/
  7. #67  
    Quote Originally Posted by k3dar View Post
    recomended remove using: lvremove /dev/store/fso

    NuttyBunny: can you please check on yours Pre's what is size of media partition ?
    --- Logical volume ---
    LV Name /dev/store/media
    VG Name store
    LV UUID mf0EW1-uMVe-MBDP-Xbb9-DpEc-IczW-azEKbi
    LV Write Access read/write
    LV Status available
    # open 1
    LV Size 6.67 GB
    Current LE 854
    Segments 1
    Allocation inherit
    Read ahead sectors auto
    - currently set to 256
    Persistent major 254
    Persistent minor 4
    Block device 254:4

    No SHR installed, just 2.1/Android dualboot
    Just remember: If I helped you, press the thanks button!

    Owner of: Pre Sprint, Pre Telcel, Pre Plus AT&T, Pre 2 Unlocked, Pixi Plus AT&T, and 2 TouchPads (my Pre3 was stolen so it won't appear again here).
    Needs: Veer (anyone?)
    Apps: Subnet Calculator, FreeCam, PhotoFun, NuttyPad (work in progress)
    HomeBrew: meta-doctor and Messaging Plugins collaborator
    Twitter: @cesarneg
  8. #68  
    Quote Originally Posted by Dragone View Post
    Is there any way to emulate a Pre 2 ?
    I think you can with qemu




    Sorry, I just had to say it
    Just remember: If I helped you, press the thanks button!

    Owner of: Pre Sprint, Pre Telcel, Pre Plus AT&T, Pre 2 Unlocked, Pixi Plus AT&T, and 2 TouchPads (my Pre3 was stolen so it won't appear again here).
    Needs: Veer (anyone?)
    Apps: Subnet Calculator, FreeCam, PhotoFun, NuttyPad (work in progress)
    HomeBrew: meta-doctor and Messaging Plugins collaborator
    Twitter: @cesarneg
  9. Dragone's Avatar
    Posts
    60 Posts
    Global Posts
    226 Global Posts
    #69  
    Quote Originally Posted by NuttyBunny View Post
    I think you can with qemu




    Sorry, I just had to say it
    ? o_O

    What's the problem with qemu ?
    I didn't understand your joke ...
  10. #70  
    Quote Originally Posted by Dragone View Post
    ? o_O

    What's the problem with qemu ?
    I didn't understand your joke ...
    The joke is that you could "emulate" some parts of a Pre or Pre2 with qemu on another machine, namely a PC with intel processor. It won't emulate completely the architecture, I think it will miss sound, and perhaps even graphics. And it would be no easy task.

    In few words, it might be possible but I don't think it will be done "in the coming months".
    Just remember: If I helped you, press the thanks button!

    Owner of: Pre Sprint, Pre Telcel, Pre Plus AT&T, Pre 2 Unlocked, Pixi Plus AT&T, and 2 TouchPads (my Pre3 was stolen so it won't appear again here).
    Needs: Veer (anyone?)
    Apps: Subnet Calculator, FreeCam, PhotoFun, NuttyPad (work in progress)
    HomeBrew: meta-doctor and Messaging Plugins collaborator
    Twitter: @cesarneg
  11. #71  
    OK, NOW... What was the difficult in installing SHR?
    I just did it on my Plus, and... it did boot

    hehehe

    I didn't use the bootr that comes with it, but the one that's on the Android thread. Other than that, I just used the default install, and the full pre image, that's all.

    ..... well, that was fun... it crashed on the first wizard... :P
    Just remember: If I helped you, press the thanks button!

    Owner of: Pre Sprint, Pre Telcel, Pre Plus AT&T, Pre 2 Unlocked, Pixi Plus AT&T, and 2 TouchPads (my Pre3 was stolen so it won't appear again here).
    Needs: Veer (anyone?)
    Apps: Subnet Calculator, FreeCam, PhotoFun, NuttyPad (work in progress)
    HomeBrew: meta-doctor and Messaging Plugins collaborator
    Twitter: @cesarneg
  12. #72  
    To install SHR, I did the following

    I used the current Makefile, it has a 5.5Gb media partition size by default (go figure). As it's my development device I don't mind

    I first deleted many things in my media partition to have space, then I booted in recovery mode, then:

    Code:
    cnegrete@cnegrete-laptop:~/Downloads/Pre/SHR$ make memload
    Transfer nova installer to device and boot it ...
    Wait for device to come back ...
    Then I did the backup thing:

    Code:
    cnegrete@cnegrete-laptop:~/Downloads/Pre/SHR$ make backup
    Unmounting partitions ...
     Unmounting /tmp/var
     Unmounting /tmp/root
     Unmounting /tmp/media
     Unmounting /tmp/boot
      Reading all physical volumes.  This may take a while...
      Found volume group "store" using metadata type lvm2
      8 logical volume(s) in volume group "store" now active
    Mounting partitions ...
     Mounting /dev/mapper/store-var
     Mounting /dev/mapper/store-root
     Mounting /dev/mapper/store-media
     Mounting /dev/mmcblk0p2
    Backuping all your device...
     Creating backup/5137e110/mmcblk0p1.bak
    8192+0 records in
    8192+0 records out
    4194304 bytes (4.0MB) copied, 0.804749 seconds, 5.0MB/s
    7958+468 records in
    8192+0 records out
    4194304 bytes (4.2 MB) copied, 0.794759 s, 5.3 MB/s
     Creating backup/5137e110/varfs.tar.gz
    Total bytes written: 38205440 (37MiB, 3.4MiB/s)
     Creating backup/5137e110/rootfs.tar.gz
    Total bytes written: 359526400 (343MiB, 4.3MiB/s)
     Creating backup/5137e110/boot.tar.gz
    Total bytes written: 10383360 (10MiB, 5.5MiB/s)
     Creating backup/5137e110/media.tar.gz
    Total bytes written: 754872320 (720MiB, 5.3MiB/s)
    Then I did the resize thing
    Code:
    cnegrete@cnegrete-laptop:~/Downloads/Pre/SHR$ make lvm-resize
    Unmounting partitions ...
     Unmounting /tmp/var
     Unmounting /tmp/root
     Unmounting /tmp/media
     Unmounting /tmp/boot
    Unmounting FSO partition ...
      Reading all physical volumes.  This may take a while...
      Found volume group "store" using metadata type lvm2
      8 logical volume(s) in volume group "store" now active
    Now we are resizing lvm partition to get some space for FSO/SHR ...
      Reducing logical volume media to 5.50 GB
      Logical volume media successfully resized
    mkdosfs 2.11 (12 Mar 2005)
      Logical volume "fso" created           <---------- HERE IT CREATES THE NEW PARTITION 
    Filesystem label=
    OS type: Linux
    Block size=4096 (log=2)
    Fragment size=4096 (log=2)
    548864 inodes, 2193408 blocks
    109670 blocks (5.00%) reserved for the super user
    First data block=0
    Maximum filesystem blocks=2248146944
    67 block groups
    32768 blocks per group, 32768 fragments per group
    8192 inodes per group
    Superblock backups stored on blocks:
        32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632
    
    Writing inode tables: make restore-mediadone                           
    Creating journal (32768 blocks):
    done
    Writing superblocks and filesystem accounting information: done
    
    This filesystem will be automatically checked every 30 mounts or
    180 days, whichever comes first.  Use tune2fs -c or -i to override.
    cnegrete@cnegrete-laptop:~/Downloads/Pre/SHR$
    Then I restored my media data
    Code:
    cnegrete@cnegrete-laptop:~/Downloads/Pre/SHR$ make restore-media
    Restoring your data to /media/internal ...
    novacom -w run file://bin/mkdir -- -p /tmp/media
    novacom -w run file://bin/mount -- /dev/mapper/store-media /tmp/media -o rw
    bin/tar: ./android/AoP.sh.txt: time stamp 2011-04-29 02:32:04 is 59846.679992676 s in the future
    
    bin/tar: .: implausibly old time stamp 1970-01-01 00:00:00
    I got "the latest unstable kernel" as the page says

    Code:
    cnegrete@cnegrete-laptop:~/Downloads/Pre/SHR$ make wget-kernel
    Downloading kernel for your device ...
    wget -N --directory-prefix=downloads/ "http://build.shr-project.org/shr-unstable/images//palmpre"/uImage-palmpre.bin
    --2011-05-03 16:50:58--  http://build.shr-project.org/shr-unstable/images//palmpre/uImage-palmpre.bin
    Resolving build.shr-project.org... 78.40.125.6
    Connecting to build.shr-project.org|78.40.125.6|:80... connected.
    HTTP request sent, awaiting response... 200 OK
    Length: 2341700 (2.2M) [application/octet-stream]
    Saving to: `downloads/uImage-palmpre.bin'
    
    100%[======================================>] 2,341,700    420K/s   in 6.4s   
    
    2011-05-03 16:51:06 (358 KB/s) - `downloads/uImage-palmpre.bin' saved [2341700/2341700]
    I flashed the kernel

    Code:
    cnegrete@cnegrete-laptop:~/Downloads/Pre/SHR$ make flash-kernel
    Unmounting partitions ...
     Unmounting /tmp/var
     Unmounting /tmp/root
     Unmounting /tmp/media
     Unmounting /tmp/boot
      Reading all physical volumes.  This may take a while...
      Found volume group "store" using metadata type lvm2
      9 logical volume(s) in volume group "store" now active
    Mounting partitions ...
     Mounting /dev/mapper/store-var
     Mounting /dev/mapper/store-root
     Mounting /dev/mapper/store-media
     Mounting /dev/mmcblk0p2
    Starting to flash the given kernel file 'downloads/uImage-palmpre.bin' to the device ...
    novaterm put file://tmp/boot/uImage-palmpre.bin < downloads/uImage-palmpre.bin
    I got my Image that I had downloaded earlier and flashed it to the Plus

    Code:
    cnegrete@cnegrete-laptop:~/Downloads/Pre/SHR$ make IMAGE=~/Documents/webOS/SHROnPre/full-palmpre.tar.gz  flash-image
    Unmounting FSO partition ...
    Erasing old image. This may take some time ...
    novacom -w run file://sbin/mkfs.ext3 -- /dev/store/fso &> /dev/null || true
    Erasing done!
      Reading all physical volumes.  This may take a while...
      Found volume group "store" using metadata type lvm2
      9 logical volume(s) in volume group "store" now active
    Mounting FSO partition ...
    Starting to flash the given image file '/home/cnegrete/Documents/webOS/SHROnPre/full-palmpre.tar.gz' to the device ...
    novacom -w run file://bin/rm -- -rf /tmp/fso/*
    novaterm put file://tmp/fso/full-palmpre.tar.gz < /home/cnegrete/Documents/webOS/SHROnPre/full-palmpre.tar.gz
    novacom -w run file://bin/tar -- -xzf /tmp/fso/full-palmpre.tar.gz -C /tmp/fso 2> /dev/null || true
    novacom -w run file://bin/rm -- /tmp/fso/full-palmpre.tar.gz 2> /dev/null || true
    That's it, I just connected to reboot

    Code:
    cnegrete@cnegrete-laptop:~/Downloads/Pre/SHR$ novaterm
    root@palm-webos:/# sync
    root@palm-webos:/# tellbootie
    novacomd socket was closed prematurely
    novacom: unexpected EOF from server

    There, remember that I had bootr from the other installation, and I didn't install it this time, ah, and also, I used Linux.
    Last edited by NuttyBunny; 05/03/2011 at 08:34 PM.
    Just remember: If I helped you, press the thanks button!

    Owner of: Pre Sprint, Pre Telcel, Pre Plus AT&T, Pre 2 Unlocked, Pixi Plus AT&T, and 2 TouchPads (my Pre3 was stolen so it won't appear again here).
    Needs: Veer (anyone?)
    Apps: Subnet Calculator, FreeCam, PhotoFun, NuttyPad (work in progress)
    HomeBrew: meta-doctor and Messaging Plugins collaborator
    Twitter: @cesarneg
  13. #73  
    mmm....

    It seems we need special firmware for the Pre to operate correctly, which supposedly is at
    Firmware – SHR

    But I see nothing...

    *sigh*
    Just remember: If I helped you, press the thanks button!

    Owner of: Pre Sprint, Pre Telcel, Pre Plus AT&T, Pre 2 Unlocked, Pixi Plus AT&T, and 2 TouchPads (my Pre3 was stolen so it won't appear again here).
    Needs: Veer (anyone?)
    Apps: Subnet Calculator, FreeCam, PhotoFun, NuttyPad (work in progress)
    HomeBrew: meta-doctor and Messaging Plugins collaborator
    Twitter: @cesarneg
  14. #74  
    NuttyBunny: nice repport older Makefile have too 5.5 as default in current is fixed downloading of rootfs and reflashing image. Info and checking minimal size will be fixed soon.

    I don't test periph under SHR, but firmware for wifi is already in roofs, if you can more firmware for your testing, put extra script in subdir "scripts" and run "make extra", this copy firmware from webOS doctor to SHR rootfs
  15. #75  
    Quote Originally Posted by k3dar View Post
    NuttyBunny: nice repport older Makefile have too 5.5 as default in current is fixed downloading of rootfs and reflashing image. Info and checking minimal size will be fixed soon.

    I don't test periph under SHR, but firmware for wifi is already in roofs, if you can more firmware for your testing, put extra script in subdir "scripts" and run "make extra", this copy firmware from webOS doctor to SHR rootfs
    Excellent!

    Downloaded the script, saved in a new subdirectory "scripts" named as "setup-extra.sh"

    Then, ran:

    make setup-extra

    Code:
    cnegrete@cnegrete-laptop:~/Documents/webOS/SHROnPre$ make setup-extra
    Extract the webos doctor ...
    Copying all extra files to extra directory ...
    make install-extra
    Code:
    cnegrete@cnegrete-laptop:~/Documents/webOS/SHROnPre$ make install-extra
      Reading all physical volumes.  This may take a while...
      Found volume group "store" using metadata type lvm2
      9 logical volume(s) in volume group "store" now active
    Unmounting FSO partition ...
    Mounting FSO partition ...
    Installing extra files to device ...
    cnegrete@cnegrete-laptop:~/Documents/webOS/SHROnPre$ novaterm
    root@Cesar Negrete - Palm Pre:/# reboot
    root@Cesar Negrete - Palm Pre:/# exit
    Just remember: If I helped you, press the thanks button!

    Owner of: Pre Sprint, Pre Telcel, Pre Plus AT&T, Pre 2 Unlocked, Pixi Plus AT&T, and 2 TouchPads (my Pre3 was stolen so it won't appear again here).
    Needs: Veer (anyone?)
    Apps: Subnet Calculator, FreeCam, PhotoFun, NuttyPad (work in progress)
    HomeBrew: meta-doctor and Messaging Plugins collaborator
    Twitter: @cesarneg
  16. #76  
    sorry for mistake with only extra
  17. #77  
    Quote Originally Posted by k3dar View Post
    sorry for mistake with only extra
    No problem, but that's the reason I don't like people with little knowledge just go and blindly type commands here and there, and then blame developers when their devices won't boot
    Just remember: If I helped you, press the thanks button!

    Owner of: Pre Sprint, Pre Telcel, Pre Plus AT&T, Pre 2 Unlocked, Pixi Plus AT&T, and 2 TouchPads (my Pre3 was stolen so it won't appear again here).
    Needs: Veer (anyone?)
    Apps: Subnet Calculator, FreeCam, PhotoFun, NuttyPad (work in progress)
    HomeBrew: meta-doctor and Messaging Plugins collaborator
    Twitter: @cesarneg
  18. Dragone's Avatar
    Posts
    60 Posts
    Global Posts
    226 Global Posts
    #78  
    Quote Originally Posted by NuttyBunny View Post
    OK, NOW... What was the difficult in installing SHR?
    I just did it on my Plus, and... it did boot

    hehehe

    I didn't use the bootr that comes with it, but the one that's on the Android thread. Other than that, I just used the default install, and the full pre image, that's all.

    ..... well, that was fun... it crashed on the first wizard... :P
    Probably the difficulty is on Pre2, somehow
  19.    #79  
    Sorry so long to post back. was away for a while which is why I needed to doctor and run. So I tried it again and there are 2 errors that occur, same as before. The part where it exits and stops running, leaving me with a non-booting(without doctoring) device is after make restore-media. the error is:
    Code:
    Restoring your data to /media/internal ...
    novacom -w run file://bin/mkdir -- -p /tmp/media
    novacom -w run file://bin/mount -- /dev/mapper/store-media /tmp/media -o rw
    mount: mounting /dev/mapper/store-media on /tmp/media failed: Device or resource busy
    make: *** [restore-media] Error 255
    the earlier error that occurs on the backup step is:
    Code:
    Creating backup/f434152b/media.tar.gz
    bin/tar: ./appdata/org.webosinternals.navit/maps/osm_bbox_-125.4,24.3,-66.5,49.3.bin: Cannot stat: Value too large for defined data type
    Total bytes written: 2463006720 (2.3GiB, 4.3MiB/s)
    bin/tar: Error exit delayed from previous errors
    any ideas?
    Last edited by woodmaster; 05/04/2011 at 09:28 PM. Reason: code tags wrong
    ᛖᚲ ᚹᛁᛏᚲᛁ ᚱᛁᛊᛏ ᚱᚢᚾᚠᚱ
  20. #80  
    Quote Originally Posted by woodmaster View Post
    Sorry so long to post back. was away for a while which is why I needed to doctor and run. So I tried it again and there are 2 errors that occur, same as before. The part where it exits and stops running, leaving me with a non-booting(without doctoring) device is after make restore-media. the error is:
    Code:
    Restoring your data to /media/internal ...
    novacom -w run file://bin/mkdir -- -p /tmp/media
    novacom -w run file://bin/mount -- /dev/mapper/store-media /tmp/media -o rw
    mount: mounting /dev/mapper/store-media on /tmp/media failed: Device or resource busy
    make: *** [restore-media] Error 255
    the earlier error that occurs on the backup step is:
    Code:
    Creating backup/f434152b/media.tar.gz
    bin/tar: ./appdata/org.webosinternals.navit/maps/osm_bbox_-125.4,24.3,-66.5,49.3.bin: Cannot stat: Value too large for defined data type
    Total bytes written: 2463006720 (2.3GiB, 4.3MiB/s)
    bin/tar: Error exit delayed from previous errors
    any ideas?
    I've said it already in another post.
    Empty your media directory by yourself, backup everything you can in your computer and delete the most you can in your device (of course, don't touch the .palm directory).

    Then install SHR.

    That error looks like is because you're having files that are too big somewhere...
    I have about 2gb of data on my Plus, so, it can do the backup with no issues at all.
    Just remember: If I helped you, press the thanks button!

    Owner of: Pre Sprint, Pre Telcel, Pre Plus AT&T, Pre 2 Unlocked, Pixi Plus AT&T, and 2 TouchPads (my Pre3 was stolen so it won't appear again here).
    Needs: Veer (anyone?)
    Apps: Subnet Calculator, FreeCam, PhotoFun, NuttyPad (work in progress)
    HomeBrew: meta-doctor and Messaging Plugins collaborator
    Twitter: @cesarneg

Tags for this Thread

Posting Permissions