Page 23 of 32 FirstFirst ... 131819202122232425262728 ... LastLast
Results 441 to 460 of 621
  1. #441  
    Quote Originally Posted by evilghost
    Thanks, I added you to ignore since it seems you're unwilling to moderate a very annoying behavior. Thanks for telling me how to ignore you
    What? You mean there's an ignore user function??
    MaxiMunK.com The Forum That Asks, "Are You Not Entertained?"

    Remember: "Anyone that thinks the Treo should just work right out of the box, shouldn't own a Treo..."
  2. #442  
    I have gotten no memory improvement with the 1.12 update. I have noticed a few things though the voice quality is better, the phone launchers faster and numbers dial much faster than previously. Also, vision seems to not only connect faster but the speed is faster. I think the apps are even respond a little faster after being launched. The biggest improvement is being able to use bt dialing with my laptop without a custom rom.
    Everex Freestyle - Casio E-105 - Palm Vx - Treo 90 - Treo 300 - Treo 600 - Treo 650 - Treo 700p -Centro
  3. #443  
    OK, I have yet to download the new firmware so I have a question about it. When the screen shuts off do you still get the extremely bright white screen . This is extremely annoying.
  4. ehosey2's Avatar
    Posts
    309 Posts
    Global Posts
    776 Global Posts
    #444  
    I called Sprint support and told them I just updated to the 1.12 firmware update and that now my vision connection is called " unnamed " and that to complete the update, I needed to get the MSL code to reprovision the Vision service. The tech guy initially told me I needed to use another phone to call back and it would be fixed then. I stated to him that I know how to reprovision my Treo and I have sucessfully updated to 1.08 and now 1.12 on my own and I am just asking for the MSL code so I can complete the update. I explained the steps with the Sprint tech guy and then asked for the MSL. At that point, he hesitated but gave in since I guess he knew I fully understood the process. Now, the update is fully complete, with no more unnamed connection issue.
    And BTW, for those that were asking, the speaker phone volume is even louder now than after 1.08 and dare I say, useable when outside now.

    -----------------------------
    Treo 650 Sprint
    1.12 rocks !
  5. #445  
    I noticed a strange problem that I can't *necessarily* attribute to 1.12 but here's what happens. When I'm in the phone app and use my stylus to access the menu by tapping the upper left corner of the screen, the very next tap I make *anywhere* on the screen causes a fatal exception error. Doesn't matter if the phone is on or off.

    ##377# reveals,

    "A reset was caused on 99/99/99 at 88:88 am while running "Phone":

    Fatal Exception.

    I can access the menu using the hard key and then the stylus works fine anywhere on the screen.

    Anyone else experiencing this?
  6. #446  
    Did anyone else have the Security, Auto Lock Device stop working with the first update? It is now working again with with the new update.
    I had gone for weeks without a random reset, had two yesturday.
  7. #447  
    Did anyone else loose Treo voicedial after the update? I am wondering if maybe that is why some of us are freeing up some memory?
    Last edited by BostonMatt; 06/18/2005 at 10:54 AM. Reason: becuase I need to learn to proof read :-)
  8. jwrogers's Avatar
    Posts
    49 Posts
    Global Posts
    53 Global Posts
    #448  
    My PRL is now 10028. Is that the most up-to-date?
  9. #449  
    Quote Originally Posted by Insertion
    What? You mean there's an ignore user function??
    He can't answer because he has you added to ignore user.
  10. domer's Avatar
    Posts
    99 Posts
    Global Posts
    155 Global Posts
    #450  
    Quote Originally Posted by Dafydd
    Did anyone else have the Security, Auto Lock Device stop working with the first update? It is now working again with with the new update.
    I had gone for weeks without a random reset, had two yesturday.
    I experienced approx. 10 resets yesterday while attempting to use Chattermail, the phone, and some other random occurances. I installed the udate yesterday morning. I did however gain a couple megs of space which is great and MUCH faster dialing time from contacts db . But why the resets . I installed the update via a "dummy" user profile, and then restored to my actual user profile. Any thoughts?
  11. #451  
    Quote Originally Posted by BostonMatt
    Did anyone else loose Treo voicedial after the update? I am wondering if maybe that is why some of us are freeing up some memory?
    Yes - you have to reload it or bring it back in from a stored backup
  12. #452  
    Quote Originally Posted by MarkY
    Do you have Bluetooth enabled? I think the consensus was that the multiple button pushing to turn the 650 on was tied to have Bluetooth on. My 650 seems to require fewer multiple pushes to turn on, but it's not perfect in that regard.
    Great catch - that's it, thanks for the reminder
  13. #453  
    Quote Originally Posted by evilghost
    Guys, is it just me, or is it absolutely annoying as all hell when scandalex comes through and vomits out 20+ posts, quoting every and any post since the last time they posted.

    Please, for the love of all that is holy, quit f'n flooding the forum with one and two liners and QUOTING EVERY MESSAGE JUST TO ADD YOUR $00.02

    It's killing me. I think I literally scrolled through an entire page of nothing but your posts.

    Seriously, read the page, collect your thoughts, and then compose it. The only reason I can see for someone to vomit out the sheer number of quoted posts you do is to rack up your post-count. At this rate you should hit 1,000 by the end of this thread. Then you will be "God-Like!".

    If anyone else finds it annoying please speak up so I don't get pooped on for being insensitive. If there's an ignore feature, I'd love to add scandalex. The post quality is absolute zero, coupled with the excessive binge/vomit-posting.
    Where the hell did this come from. Havin a bad day? Please lock up your rifles and lose the keys, especially if you have family members around the house.
  14. #454  
    Do you get a bundled version of Zap!2016 with the update? The PalmOne download page says to get the latest version and "It will be fully functional once your registration information has been entered".

    I installed it, but it looks like a trial version only.
  15. #455  
    Quote Originally Posted by peaches
    The Sprint network in PA has proved to be pretty good. I've been impressed so far. Yet nothing compares to Canadian GSM.
    Canadian GSM.............Yeah, that's kind of like Canadian Bacon, Right!
    -->BtDUN pre- and post- SprintPCS update 1.12 paired to PC and PPC.
    Darth_Maul -- a dark attacker, trained in the Jedi arts.
  16. #456  
    Quote Originally Posted by IGoDwnTwn34
    Not sure if anyone meantioned this:

    When you get the "missed a call "screen, a sms message box now appears along with detail and call back buttons.....real cool...!

    IGo
    Not on my Sprint Treo 650 it doesn't.
    Well, it isn't perfect and it makes me crazy, but I still do love my Treo!
    Sprint Treo 650 CDMA
  17. #457  
    Quote Originally Posted by Woof
    update worked great but it killed the newest versions of notepad and voicememo that I had installed.
    it killed my voicememo, notepad also.... it wouldn't resync them with hotsync either... I had to load them onto my card, then use filez to copy them back to the handhelds memory
  18. #458  
    The default for press & hold side button is RealPlayer.

    When I was using the 1.08 #3 custom ROM, the default for press & hold side button was unassigned! This allowed another app to assign usage for the side button.

    I had McPhling assigned and it worked well!

    Now with 1.12, since RealPlayer is back on my T650 there is no way to make the side button unassigned. And yes, there is a difference between assigning McPhling in Prefs->Buttons than inside McPhling itself.

    C'mon 1.12 custom ROM...get this RealPlayer off my PDA so I can be RealFree!

    Does anyone know how to make side button unassigned?
  19. kaoswlf's Avatar
    Posts
    349 Posts
    Global Posts
    353 Global Posts
    #459  
    Quote Originally Posted by JEMShoe
    The default for press & hold side button is RealPlayer.

    When I was using the 1.08 #3 custom ROM, the default for press & hold side button was unassigned! This allowed another app to assign usage for the side button.

    I had McPhling assigned and it worked well!

    Now with 1.12, since RealPlayer is back on my T650 there is no way to make the side button unassigned. And yes, there is a difference between assigning McPhling in Prefs->Buttons than inside McPhling itself.

    C'mon 1.12 custom ROM...get this RealPlayer off my PDA so I can be RealFree!

    Does anyone know how to make side button unassigned?

    Dude, I just went into preferences/personal/buttons and changed it so the side button activates PTunes... I'm sure you can do this with any application. Try it out. Realplayer annoys me too, but I just don't use it and ignore it...
  20.    #460  
    Why dont you assign "applications" to it? Thats almost "unassigned"
    <a href="http://www.wunderground.com/US/CA/Trabuco.html?bannertypeclick=miniDial">
    <img src="http://banners.wunderground.com/banner/ban/wxBanner?bannertype=miniDial&zip=92679" border=0
    </a>

Posting Permissions