Page 1 of 2 12 LastLast
Results 1 to 20 of 30
  1.    #1  
    Item Description: Official HP TouchPad Go Case
    Price Range: $10-30
    Condition: Great Cond.
    Payment Method: PayPal
    Additional Info: They are pretty rare, but I have seen them in images, even on this site. I'll attach images. I would prefer the folding kind, but the sleeve would be fine.
    PM if you got one

    Image of Alleged TP Go cases:
    tpg_kINDLE-242x314.jpg
    TouchPad Go is on the bottom with the case

    64GB GO2.jpg
    From TopToungeBarry with the Folding case, and the sleeve

    Image00018.jpg
    TP Go in Slip Case
    Attached Images Attached Images
    HP Think Beyond event link
    http://www.youtube.com/watch?v=VnjwG...dwMIQ&index=31
    If You Have A WindsorNot Hit Me Up
  2. #2  
    Quote Originally Posted by boovish View Post
    Item Description: Official HP TouchPad Go Case
    Price Range: $10-30
    Condition: Great Cond.
    Payment Method: PayPal
    Additional Info: They are pretty rare, but I have seen them in images, even on this site. I'll attach images. I would prefer the folding kind, but the sleeve would be fine.
    PM if you got one

    Image of Alleged TP Go cases:
    tpg_kINDLE-242x314.jpg
    TouchPad Go is on the bottom with the case

    64GB GO2.jpg
    From TopToungeBarry with the Folding case, and the sleeve

    Image00018.jpg
    TP Go in Slip Case
    John Steffes is making modification of original TouchPad case, so it can fit GO
    Touchpad Go Case

    and here is also some discussion about the case for GO
    Best case for a Touchpad Go? - webOS Nation Forums
  3.    #3  
    I've seen his cases, and they are ingenious, but I would prefer the camera and headphone jack open. I am only looking for the Folio case now, as someone has offered to sell me the slip case.
    HP Think Beyond event link
    http://www.youtube.com/watch?v=VnjwG...dwMIQ&index=31
    If You Have A WindsorNot Hit Me Up
  4. #4  
    Quote Originally Posted by boovish View Post
    I've seen his cases, and they are ingenious, but I would prefer the camera and headphone jack open. I am only looking for the Folio case now, as someone has offered to sell me the slip case.
    Here are some nice ideas, but they are for Touchpad not for GO
    Can someone recommend a case for my TP??
  5. #5  
    Quote Originally Posted by boovish View Post
    I've seen his cases, and they are ingenious, but I would prefer the camera and headphone jack open. I am only looking for the Folio case now, as someone has offered to sell me the slip case.
    I'm looking for both of the cases, so if you know if the person with the slip case has more, I'd be interested! (Especially with the blue stitching.)
    Did you know:

    webOS ran on a Treo 800 during initial development.
  6.    #6  
    Quote Originally Posted by dkirker View Post
    I'm looking for both of the cases, so if you know if the person with the slip case has more, I'd be interested! (Especially with the blue stitching.)
    PM eblade
    HP Think Beyond event link
    http://www.youtube.com/watch?v=VnjwG...dwMIQ&index=31
    If You Have A WindsorNot Hit Me Up
  7.    #7  
    Quote Originally Posted by Sumy View Post
    Here are some nice ideas, but they are for Touchpad not for GO
    Can someone recommend a case for my TP??
    Thanks for the tip, I'll get one of these cases if someone doesn't have a folio case available
    HP Think Beyond event link
    http://www.youtube.com/watch?v=VnjwG...dwMIQ&index=31
    If You Have A WindsorNot Hit Me Up
  8.    #8  
    Still looking for both of these cases. Does no one have any of them?
    HP Think Beyond event link
    http://www.youtube.com/watch?v=VnjwG...dwMIQ&index=31
    If You Have A WindsorNot Hit Me Up
  9.    #10  
    I wonder if that would be possible to do well enough so that it doesn't look like a prototype that has been cut up. Maybe Steffes can help
    HP Think Beyond event link
    http://www.youtube.com/watch?v=VnjwG...dwMIQ&index=31
    If You Have A WindsorNot Hit Me Up
  10. #11  
    Quote Originally Posted by boovish View Post
    I wonder if that would be possible to do well enough so that it doesn't look like a prototype that has been cut up. Maybe Steffes can help
    I can attempt if you wish... But it all depends on the material, the cases I make, I take apart the existing case, then re-bond it. However, not all cases are made the same, some HP cases were made with different bonding glue, which makes it stretch or wrinkle the case material when re-bonded.

    I can not make any promises that I can deliver, I have attempted to adapt the existing case including cutting for the back camera and head phones, but it causes the case to loose its structural design, over time the power button section rips, and a crack forms underneath the volume buttons which causes the Go to fall out of the case (I have attempted this three tines, trying different methods, all resulting in failure)...

    This is why I detail my existing cases without those features, it takes anywhere from one hour to three hours to transform an existing case, depending on the existing cases bonding glue... I only charge $10, for my time and materials used to re-bond. If one wants to send me another case, pm me, and I will attempt, can not say how much it will cost to transform but I can attempt if you wish...
  11. #12  
    John's mod is functionally very good. It has the same feel of the TP case despite the heavy amount of modification required. See my review at pivotCE. Can't link, sorry.
    Follow me on Twitter
    For the latest webOS news check out pivotCE
  12.    #13  
    I'll probably end buying one of steffes cases to hold me over until I manage to get my hands on a folio case for the go. Maybe we could try 3d printing copies of it. I know that they have flexible materials. Maybe a tough foam.
    HP Think Beyond event link
    http://www.youtube.com/watch?v=VnjwG...dwMIQ&index=31
    If You Have A WindsorNot Hit Me Up
  13.    #14  
    But seriously I would really like to buy both of these cases (Official Folio and Slip) eblade hasn't been responding to my PMs after the initial conversation. Really bummed too, because it would be neat to have a specially tailored case for this device.
    HP Think Beyond event link
    http://www.youtube.com/watch?v=VnjwG...dwMIQ&index=31
    If You Have A WindsorNot Hit Me Up
  14. #15  
    Quote Originally Posted by boovish View Post
    But seriously I would really like to buy both of these cases (Official Folio and Slip) eblade hasn't been responding to my PMs after the initial conversation. Really bummed too, because it would be neat to have a specially tailored case for this device.
    I have asked our company supplier if they can somehow arrange samples of folio case in a larger qty like 10 pcs or something.
    They can do only 1 or 2 by hands and price would be too high like 50 USD.
    They told me that if I pay for the laser moulding costs which is needed for cuting the leather pieces than they can do any qty as a sample. They will let me know the fee, but I guess it is not very high as this are ordinary cutting knifes, put in the wood plate. In their company they use laser to make them and they don't made them by hand as usual.
    The slip case you are reffering to, do you mean orginal HP prototype or ?.
  15.    #16  
    Yeah, the Original HP Prototype. But I bet we could probably do some 3D scans, and recreate it for people who wn the HP TouchPad Go
    HP Think Beyond event link
    http://www.youtube.com/watch?v=VnjwG...dwMIQ&index=31
    If You Have A WindsorNot Hit Me Up
  16.    #17  
    FYI, I am still looking for either of these cases
    HP Think Beyond event link
    http://www.youtube.com/watch?v=VnjwG...dwMIQ&index=31
    If You Have A WindsorNot Hit Me Up
  17. #18  
    Just gonna leave this for boovish...http://www.ebay.com/itm/HP-TouchPad-...-/301167843798

    Sent from my Venue 8 3830 using Tapatalk
  18. #19  
    Just got the case. Pretty good quality. Have to say I'm impressed.
  19. #20  
    Quote Originally Posted by allen832008 View Post
    Just got the case. Pretty good quality. Have to say I'm impressed.
    I was very impressed with mine. He also has screen protectors and spare batteries for the Go for sale. I never thought I'd get either of those!
    Devices: Pre3 16GB (AT&T - webOS 2.2.4) | White TouchPad 4G 32GB (AT&T - webOS 3.0.5 + LunaCE)
Page 1 of 2 12 LastLast

Similar Threads

  1. Slip/Sleeve Case
    By D0lphin in forum webOS Accessories
    Replies: 0
    Last Post: 08/24/2011, 10:18 PM
  2. Palm Side Case vs. Slip Case; Rubber Skins?
    By ryan4s2 in forum webOS Accessories
    Replies: 0
    Last Post: 06/07/2009, 05:30 PM
  3. OEM Slip case
    By Templar in forum Palm OS Devices & Apps
    Replies: 8
    Last Post: 12/20/2004, 11:58 AM
  4. Looking For Treo600 Slip Case
    By Silver Sun in forum Marketplace
    Replies: 0
    Last Post: 05/13/2004, 11:01 AM
  5. Treo Slip case + $7 clip + Super Glue = 'IPod Like' New Case!
    By howardem in forum Palm OS Devices & Apps
    Replies: 10
    Last Post: 01/20/2004, 09:22 AM

Posting Permissions