Page 2 of 2 FirstFirst 12
Results 21 to 36 of 36
  1. #21  
    I just novaterm'd in, and I see similar files to what jc-treo is seeing. My getfull response is 10121.875, though. I guess my battery isn't as good.

    Under regs, here is the list of files:
    Code:
    root@MyHPVeer:/sys/devices/virtual/misc/a6_0# cd regs
    root@MyHPVeer:/sys/devices/platform/i2c-adapter/i2c-0/0-0031# ls
    a6_diag                   getfull40                 remote_acc_data_1
    acc_data_0                getmaxpoweravail          remote_acc_data_10
    acc_data_1                getpercent                remote_acc_data_11
    acc_data_10               getrawas                  remote_acc_data_12
    acc_data_11               getrawcoulomb             remote_acc_data_13
    acc_data_12               getremoteversion          remote_acc_data_14
    acc_data_13               getrsense                 remote_acc_data_15
    acc_data_14               getsacr                   remote_acc_data_2
    acc_data_15               gettemp                   remote_acc_data_3
    acc_data_2                getversion                remote_acc_data_4
    acc_data_3                getvoltage                remote_acc_data_5
    acc_data_4                id                        remote_acc_data_6
    acc_data_5                int_mask0                 remote_acc_data_7
    acc_data_6                int_mask1                 remote_acc_data_8
    acc_data_7                int_mask2                 remote_acc_data_9
    acc_data_8                int_mask3                 remote_acc_data_combo
    acc_data_9                int_status0               remote_mfgrid_v1
    acc_data_combo            int_status1               remote_mfgrid_v2
    charger                   int_status2               remote_productid_v1
    comm_txdata_rx_data       int_status3               remote_productid_v2
    command                   local_mfgrid              remote_serno_v1
    command_addr              local_productid           remote_serno_v2
    command_data              local_serno               remote_struct_ver
    command_status            min_pwm                   romid_0
    driver                    modalias                  rsrc
    get_comm_status           name                      status
    getage                    periodic_wake_bit_params  subsystem
    getasl                    power                     temp_high
    getavgcurrent             puck_priority             temp_low
    getcoulomb                rarc_crit                 uevent
    getcurrent                rarc_low_1                v_offset
    getfac                    rarc_low_2                validate_cksum
    getfull                   remote_acc_data_0         volt_low
    Palm III-->Handspring Visor-->Sony Clie PEG-NR70-->no PDA -->Palm Treo 755p-->Palm Pre-->HP Veer
  2.    #22  
    Quote Originally Posted by jc-Treo View Post
    temp_high = 57
    temp_low = 0
    Seems the battery operates between 0 and 57 C
    volt_low = 3396480
    Shutsdown at 3,396V
    charger = 43
    status
    Don't know
    rarc_crit = 0
    Remaining Active Relative Capacity is 0
    getage = 100.00
    Your Health is 100% = a new battery
    getfull = 10161.250
    getfull40 = 935.000
    Not sure yet. getfull40 was the manufacturer rating. But 935mAh is a bit low?
  3.    #23  
    Now I understand what the remote_<something> stands for: Touch to share!!
  4.    #24  
    Quote Originally Posted by jbg7474 View Post
    I just novaterm'd in, and I see similar files to what jc-treo is seeing. My getfull response is 10121.875, though. I guess my battery isn't as good.

    Under regs, here is the list of files:
    Great overview. If you could give me at least all get<something> values?

    Thanks so much.
  5. jc-Treo's Avatar
    Posts
    439 Posts
    Global Posts
    444 Global Posts
    #25  
    Not sure if this is what you wanted:

    root@MyHPVeer:/sys/devices/platform/i2c-adapter/i2c-0/0-0031# cd /sys/class/misc/a6_0/
    root@MyHPVeer:/sys/devices/virtual/misc/a6_0# ls -al
    drwxr-xr-x 3 root root 0 Aug 26 2010 .
    drwxr-xr-x 48 root root 0 May 30 12:33 ..
    -r--r--r-- 1 root root 4096 May 30 12:46 dev
    drwxr-xr-x 2 root root 0 May 30 12:46 power
    lrwxrwxrwx 1 root root 0 May 30 12:33 regs -> ../../../platform/i2c-adapter/i2c-0/0-0031
    lrwxrwxrwx 1 root root 0 May 30 12:46 subsystem -> ../../../../class/misc
    -rw-r--r-- 1 root root 4096 Aug 26 2010 uevent
    Sprint Treo 650 --> Sprint Treo 700p --> Sprint Centro --> Sprint Pre- --> AT&T Veer/ Pre 2/ Pre 3, Touchpad
  6.    #26  
    Quote Originally Posted by jc-Treo View Post
    Not sure if this is what you wanted:

    lrwxrwxrwx 1 root root 0 May 30 12:33 regs -> ../../../platform/i2c-adapter/i2c-0/0-0031
    lrwxrwxrwx 1 root root 0 May 30 12:46 subsystem -> ../../../../class/misc
    -rw-r--r-- 1 root root 4096 Aug 26 2010 uevent
    Actually no, but you can see the links here.

    I want the contents of all files starting with a get*
  7. #27  
    All the get<something> responses:
    Code:
    root@:/sys/devices/platform/i2c-adapter/i2c-0/0-0031# cat get_comm_status
    01
    root@:/sys/devices/platform/i2c-adapter/i2c-0/0-0031# cat getage
    100.00
    root@:/sys/devices/platform/i2c-adapter/i2c-0/0-0031# cat getasl
    0
    root@:/sys/devices/platform/i2c-adapter/i2c-0/0-0031# cat getavgcurrent
    362578
    root@:/sys/devices/platform/i2c-adapter/i2c-0/0-0031# cat getcoulomb
    689
    root@:/sys/devices/platform/i2c-adapter/i2c-0/0-0031# cat getcurrent
    361953
    root@:/sys/devices/platform/i2c-adapter/i2c-0/0-0031# cat getfac
    0.000
    root@:/sys/devices/platform/i2c-adapter/i2c-0/0-0031# cat getfull
    10121.875
    root@:/sys/devices/platform/i2c-adapter/i2c-0/0-0031# cat getfull40
    935.000
    root@:/sys/devices/platform/i2c-adapter/i2c-0/0-0031# cat getmaxpoweravail
    1664665
    root@:/sys/devices/platform/i2c-adapter/i2c-0/0-0031# cat getpercent
    77 
    root@:/sys/devices/platform/i2c-adapter/i2c-0/0-0031# cat getrawas
    128
    root@:/sys/devices/platform/i2c-adapter/i2c-0/0-0031# cat getrawcoulomb
    713.125
    root@:/sys/devices/platform/i2c-adapter/i2c-0/0-0031# cat getremoteversion
    A6 Version: HW: 255, FW (M.m.B): 255.255.255, ManID: -1, ProdTyp: -1
    root@:/sys/devices/platform/i2c-adapter/i2c-0/0-0031# cat getrsense
    20
    root@:/sys/devices/platform/i2c-adapter/i2c-0/0-0031# cat getsacr
    0.000
    root@:/sys/devices/platform/i2c-adapter/i2c-0/0-0031# cat gettemp
    31
    root@:/sys/devices/platform/i2c-adapter/i2c-0/0-0031# cat getversion
    A6 Version: HW: 255, FW (M.m.B): 2.51.18, ManID: 28769, ProdTyp: 769
    root@:/sys/devices/platform/i2c-adapter/i2c-0/0-0031# cat getvoltage
    4060160
    Palm III-->Handspring Visor-->Sony Clie PEG-NR70-->no PDA -->Palm Treo 755p-->Palm Pre-->HP Veer
  8.    #28  
    Thank you, with this data I can at least let Dr.Battery read all values.
    Still not sure if a calibration is needed and possible.
  9. #29  
    Awesome, glad I could help!
    Palm III-->Handspring Visor-->Sony Clie PEG-NR70-->no PDA -->Palm Treo 755p-->Palm Pre-->HP Veer
  10.    #30  
    For your info:
    You are charging with around 360mA and have 77% charged. Temperature of the battery is 31C and your battery has 713mAh at the moment.
    Not sure with max mAh yet.
  11. jc-Treo's Avatar
    Posts
    439 Posts
    Global Posts
    444 Global Posts
    #31  
    Here are mine:

    getage:100.00
    getasl:0
    getavgcurrent:188515
    getcoulomb:846
    getcurrent:184765
    getfac:0.000
    getfull:10200.625
    getfull40:935.000
    getmaxpoweravail:1664665
    getpercent:92
    getrawas:128
    getrawcoulomb:859.375
    getremoteversion:A6 Version: HW: 2, FW (M.m.B): 0.23.0, ManID: 1, ProdTyp: 28769
    getrsense:20
    getsacr:0.000
    gettemp:37
    getversion:A6 Version: HW: 255, FW (M.m.B): 2.51.18, ManID: 28769, ProdTyp: 769
    getvoltage:4177280
    Sprint Treo 650 --> Sprint Treo 700p --> Sprint Centro --> Sprint Pre- --> AT&T Veer/ Pre 2/ Pre 3, Touchpad
  12.    #32  
    Thanks, good to have two versions

    You Health = 100% = new battery
    Quote Originally Posted by jc-Treo View Post
    getage:100.00
    no clue
    getasl:0
    Average current (don't know between what time intervall) is 188mA
    getavgcurrent:188515
    Actual capacity 846 mAh:
    getcoulomb:846
    Charging with 185 mA:
    getcurrent:184765
    No clue:
    getfac:0.000
    Have to find out these. Your battery has a max of 1020mAh or 935mAh:
    getfull:10200.625
    getfull40:935.000
    Don't know
    getmaxpoweravail:1664665
    You battery has now 92% of the capacity
    getpercent:92
    Don't know
    getrawas:128
    The rawcoulomb is a litle higher than the coulomb:
    getrawcoulomb:859.375
    Seems to be the firmware Rod has bricked his Veer with
    Maybe the version of the remote device
    getremoteversion:A6 Version: HW: 2, FW (M.m.B): 0.23.0, ManID: 1, ProdTyp: 28769
    The resitor as 20(have to look at ohm miliohm)
    getrsense:20
    Unkown
    getsacr:0.000
    Temperature 37C
    gettemp:37
    The version of the A6 Hard/Firmware
    getversion:A6 Version: HW: 255, FW (M.m.B): 2.51.18, ManID: 28769, ProdTyp: 769
    Current Voltage 4.177V
    getvoltage:4177280
  13. jc-Treo's Avatar
    Posts
    439 Posts
    Global Posts
    444 Global Posts
    #33  
    Quote Originally Posted by somline View Post
    Thanks, good to have two versions

    Thank you! Let us know if we can provide anything else!
    Sprint Treo 650 --> Sprint Treo 700p --> Sprint Centro --> Sprint Pre- --> AT&T Veer/ Pre 2/ Pre 3, Touchpad
  14.    #34  
    Quote Originally Posted by jc-Treo View Post
    Thank you! Let us know if we can provide anything else!
    I send you the ipk when I have time to build a version. Keep preware ready ;-)-
    Thanks again.
  15.    #35  
    Thank you jbg7474 and jc-Treo,
    new Version of Dr.Battery (0.1.4) is available to include the Veer.
    Veer supports only readings and no calibration yet.
  16. jc-Treo's Avatar
    Posts
    439 Posts
    Global Posts
    444 Global Posts
    #36  
    Quote Originally Posted by somline View Post
    Thank you jbg7474 and jc-Treo,
    new Version of Dr.Battery (0.1.4) is available to include the Veer.
    Veer supports only readings and no calibration yet.
    Seems to work just fine! Thank you!
    Sprint Treo 650 --> Sprint Treo 700p --> Sprint Centro --> Sprint Pre- --> AT&T Veer/ Pre 2/ Pre 3, Touchpad
Page 2 of 2 FirstFirst 12

Posting Permissions