Page 2 of 4 FirstFirst 1234 LastLast
Results 21 to 40 of 65
Like Tree17Likes
  1.    #21  
    share somethings from Touchpad 32G/DVT wifi that running andriod 2.2.1..........
    1. can not turn off device or say that don't know how to shut it down ... press power/select power off that means reboot the device. Hold power+home that means reboot the device. Press home that means back to last step.....
    2. there are speaker round on the top and lock round in the bottom the first page. need to connect two round by finger and unlock it.....
    3. Have sim card set and phone signal in top of right side. But check with mainboard no 3G module on it. And same as common 32G wifi mainboard. So forget 3G function for this device althought have CDMA NAM Programming/Qualcomm Settings/Phone software.....
    4.Phone storage is 150M only. try to use Busybox Installer to get rooted. But still can not move software to SD card...........
    5.Running Qualcomm Neocore software with1024*768/Audio On. After a short 3D movie and Benchmark is 50.2FPS (Good or bad ???).
    6. Can not use Google play. But can use Chinese HiMarket/Andriod Market/Baidu Andriod Martket....don't know why.
    7.Plug orginal charger with this device (Zero power) no question mark problem....
    8. Hold power +vol up nothing happened .can not be bootie. Need to enter DFU utilities... I think that I can flash ot from Andriod 2.2.1 to webos 3.0.5 with Nova device installer. But need to find way how to flash touchpad from webos 3.0.5 to Andriod 2.2.1 first ...Sold hold it
    Attached Images Attached Images
  2.    #22  
    pictures............
    Attached Images Attached Images
  3. #23  
    Quote Originally Posted by lemanho View Post
    I think I can fix pre 3 battery problem.....
    All I do that need to look for a special connector to connect pre 3 battery alone . And find some cables /USB head to connect to PC. And need to connect to battery protector board with a special software.
    Not easy................
    I hope that you buy a new pre 3 battery directly if battery got a problem...
    Buy a new...?
    "If the window's glasses is broken, build a new wall!" Hahahahahaha #okIstopped

    Hey! Just a minute: any ot this Touchpads; Go or not, support SD card??? :confused?


    Best Regards...
    "If A Man Isn't Willing To Take Some Risk For His Opinions, Either His Opinions Are No Good Or He's No Good!" - Ezra Pound (Poet & Critic)
    (Happy A Lot, As A Good Carioca!)
  4.    #24  
    hundred of dead touchpd batterys waiting for fix by us....................
    Attached Images Attached Images
    Remy X likes this.
  5. #25  


    lemanho, can you reply?

    Hey! Just a minute: any ot this Touchpads; Go or not, support SD card???

    Abraços...
    "If A Man Isn't Willing To Take Some Risk For His Opinions, Either His Opinions Are No Good Or He's No Good!" - Ezra Pound (Poet & Critic)
    (Happy A Lot, As A Good Carioca!)
  6.    #26  
    never saw the touchpad 9.7inch devices to support SD card.It use same production bottom mold .It just slight difference inside design between WiFi version and 3G version.
    But heard about touchpadgo 7inch support sd card. But never saw it by myself. But I am sure one webosnation fan running touchpadgo 16G gprs webOS 3.0.5 now.......
    Rnp and cbosdell like this.
  7.    #27  
    Another suprise..: Got really Touchpad 32G 3G running andriod 2.3.4 rom in the weeky from my old friend... It sounds like
    CPU: APQ 8060 1.5Ghz
    eMMC: Sandisk 32G
    LPDDR2: 1GB Samsung
    Touch panel: TPK
    A case: Hip
    PCBA Frame: Hip
    Mid Frame: YR#A#or#B
    3G: 361 R1C or L/T

    1. 3G module building the mainboard. But can not use china unicom 3G now. But will fix it later. And see wifi wire are blue and gry color at first time. It is black color in normal time. Model number is Inventec Topaz 3G...
    2.Can turn off it completetly. When turn on the device. shows Wall Cartoon logo and Andriod Logo (No HP or Qualcomm logo.) No two round lock. press home still means back to last step.
    3.Phone storage is 150MB too. But running Superuser and can move the softwares to SD card....(I like it).
    4.Can not use camera and video....
    5.can use google play or andriod market........
    6.Running Qulacomm Neocore with 1024*768 with audio on. the benchmark is 57.4FPS.
    Attached Images Attached Images
    Rnp likes this.
  8. #28  
    Interesting stuff!

    The picture with the Nova-Main is an ANCIENT build of webOS 3.0.0. Wow... It has really been > 1.5 years since I last saw that. :P This was before everything (well... ALMOST everything) had moved to Enyo1. I enjoyed opening an app and having the reaction, "Well! This app hasn't been Enyo-ified yet!". And then seeing it become Enyo based a few weeks later.
    Did you know:

    webOS ran on a Treo 800 during initial development.
    Rnp likes this.
  9.    #29  
    Ancient??? But I saw that 4-5 touchpad running nova-main by myself. really....
    I had checked the mainboard as same as normal 32G wifi version. I do not know how to use this device.No wifi/No 3G.....Also show
  10.    #30  
    no service like pre mobile phone. And I looked for a early design touchpad that without SIM card design. Will share it here later.
  11.    #31  
    Talk about TP 32G running nova-main os again. It shows December 23 2010 from regional settings.Also shows "HP webos 3.1.0 is now available. It's about 22MB. We'll downloard it over the next couple of days when your device is idle and a high network is available. You'll be notified when the update is ready to install"...
    HP webos 3.1.0....Is it truth?????
    Attached Images Attached Images
  12.    #32  
    Also it show four phone symbols on dial pad...looks funny. show more pictures from this device. 80% feeling like pre mobile phone. ...
    Attached Images Attached Images
  13. #33  
    3.1.0?????????




    Best Regards...
    "If A Man Isn't Willing To Take Some Risk For His Opinions, Either His Opinions Are No Good Or He's No Good!" - Ezra Pound (Poet & Critic)
    (Happy A Lot, As A Good Carioca!)
  14. #34  
    Lemanho,

    if the friend you meet weekly keeps providing more devices to you, what are you going to do with them all, let them pile up in a closet? Might want to sell some of them to true webos fans, the likes of can only be found around here!

    Just a thought,
    because
    I'd snap up every broken tp go device you want to sell me, fix em up and resell to the folks here who'd love to have and cherish 'em.
    Thanks,
    Barry
    ----------------------------------------------------------------------------------------------------
    I am an AT&T employee and the postings on this site are my own and don’t necessarily represent AT&T’s positions, strategies or opinions.
    cbosdell and Rnp like this.
  15.    #35  
    think about it. Will show it in marketplace after Chinese lunar new year....
  16.    #36  
    Share with 3G issue from TP 32G 3G Andriod 2.3.4....(Interesting)
    1. Prepare some Ericsson F5521gw 3G modules which come from HP notebook/TP EVT4/Touchpadgo 3G. All can work.
    2. Disconnect the battery. Cut off tin paper and take out old Ericsson F5521 gw 3G module.
    3.Replace the working Ericsson F5521 gw 3G module. Put the china Unicom 3G card. But it didn't work.....
    4. Try to put this old Ericsson F5521gw 3G module into Touchpadgo . It can work with China Unicom 3G card ......

    So Touchpad 3G lock just depending device and 3G module. For example there is a lock touchpad ATT 32G 3G device(A lot webos fans want to buy or look for a unlock code). Try to replace a Ericssion F5521gw 3G module that come from HP notebook. I had tried 3 HP notebook 3G Ericsson F5521gw modules and all can work in touchpad......(excluding TP 32G 3G Andriod 2.3.4)
    Attached Images Attached Images
  17.    #37  
    sharing one intersting thing from TPDebrick V004 threads...........
    One webos fan have a touchpad 32G Wifi andriod 2.2.1 bricked and want to upgrade to webos . ( I am sure that Andriod 2.2.1 TP do not have question mark problem).
    After a lot steps and can not use doctor finally. Showing the Ubuntu 12.04 homescreen....

    I think that must use Novainstall software to flash this device..........
    Attached Images Attached Images
  18.    #38  
    To be continued.Got a strange feeling that they are killing touchpads..........
    In the final. Maybe need to replace or fix touchpad mainboard by my friends. It is too expense to fix one touchpad mainboard as same as buy two touchpad devices.
  19.    #39  
    defective device picture....
    Attached Images Attached Images
  20.    #40  
    Wow...Can contact above webos fan in the other chinese webos forum. We are living in the same city....
    1. The device 32G wifi andriod 2.2.1 that finished TpDebrick 004 and can use recovery . But can not use 3.0.0/3.0.4/3.0.5 doctor dirctly.
    2. So he had modification 3.0.0/3.0.4/3.0.5 doctors with metadoctor. But it can use revised 3.0.0 doctor only . 3.0.4/3.0.5 revised doctors can not use.
    3. Flash the device which had running 3.0.0 to CM10.But lost touch in 3.0.0 and CM 10 both.
    4. To suggest him to grab the webos.tar and hp.tar from 3.0.5 rom . Flash it with Novainstall77 software. Replace the latest digital control board v1.20. All can work in this device.....( there are v0.10/v 0.20/v0.40/v0.41 control boards version in development samples. It will lost touch function if mix).........
    Rnp likes this.
Page 2 of 4 FirstFirst 1234 LastLast

Posting Permissions