Results 1 to 5 of 5
  1.    #1  
    After moving many folders and tiles of offline maps into the invisible maptool folder. The touchpad didn't came back from the USB storage mode when I ejected from the desktop and stuck on the HP logo after a hard reset.

    So I tried to get into recovery mode and doctor it. But doesn't matter which version of the ROM I tried, it always get stuck at 12%. Looking at the command line window while doctoring, I can see it get to 12% and then it starts to go through the .maptool folders.

    Is there a way to get access to the USB storage without a functioning ROM? I'm not entirely sure what I've done when I was moving those offline maps. Is there anything else that I can do to resolve the problem?
  2.    #2  
    I have managed to get into the Commandline mode when it is being stuck at 12% during doctor.

    My aim was to try to delete the .MapTool folder or anything suspicious looking in the internal storage. So I type "cd /media/internal/" and then "ls" returned with nothing. And "ls -a" return with only ". .."

    Can anyone help me?
  3. #3  
    Quote Originally Posted by idiotboxxer View Post
    I have managed to get into the Commandline mode when it is being stuck at 12% during doctor.

    My aim was to try to delete the .MapTool folder or anything suspicious looking in the internal storage. So I type "cd /media/internal/" and then "ls" returned with nothing. And "ls -a" return with only ". .."

    Can anyone help me?
    Yes - as far as you can get into Bootie mode (volume-up while powering device on) - you can mount /media/internal on Linux machine (lvm2 package have to be installed)...
  4.    #4  
    Thanks for the head's up. I am on a Mac using Terminal. Can you give a bit more info and guidance please?
    thanks
  5. #5  
    on Linux here - but for the record:
    1. check dmesg:
    Code:
    dmesg | tail -20
    [95779.648040] usb 1-1: new high speed USB device using ehci_hcd and address 22
    [95779.795308] scsi11 : usb-storage 1-1:1.1
    [95780.795230] scsi 11:0:0:0: Direct-Access     Palm     bootie           1.00 PQ: 0 ANSI: 2
    [95780.799008] sd 11:0:0:0: Attached scsi generic sg2 type 0
    [95780.802701] sd 11:0:0:0: [sdb] 62324736 512-byte logical blocks: (31.9 GB/29.7 GiB)
    [95780.805688] sd 11:0:0:0: [sdb] Write Protect is off
    [95780.805693] sd 11:0:0:0: [sdb] Mode Sense: 03 00 00 00
    [95780.805696] sd 11:0:0:0: [sdb] Assuming drive cache: write through
    [95780.813697] sd 11:0:0:0: [sdb] Assuming drive cache: write through
    [95780.813706]  sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 sdb12 sdb13 sdb14 >
    [95780.839071] sd 11:0:0:0: [sdb] Assuming drive cache: write through
    [95780.839076] sd 11:0:0:0: [sdb] Attached SCSI disk
    2. find LVM partition
    Code:
    fdisk -l /dev/sdb | grep LVM
    /dev/sdb14          98305     1943424    29521920   8e  Linux LVM
    or properly:
    Code:
    sudo pvs
      PV         VG    Fmt  Attr PSize  PFree
      /dev/sdb14 store lvm2 a-   28.13g 8.00m
    3. find LV volume
    Code:
    sudo lvdisplay | grep media -B1 -A15
      --- Logical volume ---
      LV Name                /dev/store/media
      VG Name                store
      LV UUID                qSacxS-wStL-iHBV-O9zR-SIKJ-ufx5-96ZtK1
      LV Write Access        read/write
      LV Status              available
      # open                 0
      LV Size                27.20 GiB
      Current LE             3482
      Segments               1
      Allocation             inherit
      Read ahead sectors     auto
      - currently set to     256
      Persistent major       254
      Persistent minor       6
      Block device           251:6
    4. mount using given LV name
    Code:
    sudo mount /dev/store/media /mnt

Posting Permissions