Page 1 of 2 12 LastLast
Results 1 to 20 of 24
Like Tree1Likes
  1.    #1  
    Just curious how everyone's battery is doing holding a charge.

    *Please check with no other programs running

    *Give it a few seconds after opening Govnah to reach a level current

    *Also Post what you have your TP overclocked to

    Mine is -1008 at max brightness / 1.5 (uberkernel)


    Thanks!
  2. #2  
    -633 with uberkernel installed but turned to palm default
    Conne>< Coding

    Remember!!
    *In Rod we trust.*

    Yes, my user name says kid. Also, yes I'm 21. It's a long story.

    Devices: Touchpad, 32 GB
    Retired my pre for an Epic 4G Touch, Miss it dearly howerver.

  3. alan sh's Avatar
    Posts
    766 Posts
    Global Posts
    913 Global Posts
    #3  
    With a few apps open (sorry, I'm doing other things) its hovering around -990. With it back how I want it (about 40%) its around -735

    Alan
  4. #4  
    My TP 32 gig - with brightness at max - GOVNAH tells me the battery current is -1008, but changes to a maximum of -1069.
    Uberkernel at 1.5

    Patricia
  5. #5  
    1160ish MAX

    1040ish - 1060ish sitting

    F4 Phantom @ 1.7ghz
  6. #6  
    Rats, I went through the steps, got my reading, only to see that this was for TouchPads! I only have a Palm Pre+...which has -255 after about 1 minute, then drops to -545mA after 1.5 minutes, then back to -251. I'm running Screenstate 500/800 and it's currently @ 800 MHz.

    Sorry I know you didn't need that info, but I had already gotten most of it before I saw you were only looking at TPs.
    Sent from my slowly diminishing intellect

    I'm just a soul who's intentions are good...oh Lord, please don't let me be misunderstood!

  7. #7  
    I find it hard to believe anyone is pulling less than 1000Ma with their brightness set to max and the TP at 1.5ghz +.


    CERTAINLY not 600-700.
  8. #8  
    16gb uberkernel 1.5

    get around 950-1040
  9. #9  
    -660 running F4 at 1.8 GHz but its only that low because CPU 1 & 2 are throttled down to 192 MHz.
    Attached Images Attached Images
  10. #10  
    Uberkernel 1.5, around 950 at max brightness, 650 with brightness set at 50%
  11. #11  
    Quote Originally Posted by 9KRacing View Post
    I find it hard to believe anyone is pulling less than 1000Ma with their brightness set to max and the TP at 1.5ghz +.


    CERTAINLY not 600-700.
    I agree, out of the box with logging as low as possible and brightness turned all the way down you will see ~500ma pull. . . maybe it will get down to 450ish.
    jetking2 likes this.
  12. #12  
    950 max 740 lowest 1.5ghz uberkernel
  13. #13  
    No Cards running

    Palm Default: About -960 to -1030
    UberKernel 1.5: Same.

    On the TouchStone, the current draw drops to -3 either with Palm Default or Uberkernel 1.5
  14. #14  
    With nothing but Govnah, im pulling -700mA, max brightness and ondemand 1.5GHz, and wifi connected
  15. #15  
    Mine is Palm default with wifi-on. 32gb with the "brighter" screen

    100% -1069
    75% -857
    50% -729
    Slide left -545
    Lowest -485 Brightness App

    I wonder if the different displays make a difference.
    Last edited by bobbymd7; 09/13/2011 at 06:41 PM.
  16. #16  
    I'm using battery monitor to check current between a 32gb with brighter screen and 16gb with dimmer screen. The 16gb draws 30-90 less.
  17. #17  
    Quote Originally Posted by 9KRacing View Post
    I find it hard to believe anyone is pulling less than 1000Ma with their brightness set to max and the TP at 1.5ghz +.


    CERTAINLY not 600-700.
    I think they have the dimmer screen and OCing shouldn't make a difference. We all will drop to 192mhz with single core running.
  18. LurkerX's Avatar
    Posts
    357 Posts
    Global Posts
    367 Global Posts
    #18  
    Average over 2 minutes idling with the screen/Govnah on and nothing else, with all the kill logging tweaks tweaked, Wifi and Bluetooth on.
    100% brightness
    Palm default kernel: ~720mA
    Uberkernel: ~ 730mA

    At min brightness
    Palm default kernel: ~557mA
    Uberkernel: ~610mA

    Made another profile where the min speed was 1.5. With both Cores running full on at 1.5 and 100% brightness: ~805mA
    Last edited by LurkerX; 09/13/2011 at 07:31 PM.
  19. #19  
    -672mA on F4, ondemandctl, idle, auto light sensor on but slider at 100%, min 192 MHz, max set to 1.8GHz.
  20. #20  
    Quote Originally Posted by h3x3di7 View Post
    With nothing but Govnah, im pulling -700mA, max brightness and ondemand 1.5GHz, and wifi connected
    Auto-dim is on.

    Quote Originally Posted by bobbymd7 View Post
    OCing shouldn't make a difference.
    If the voltage was tweaked to run that speed, then yes it should

    Quote Originally Posted by LurkerX View Post
    Palm default kernel: ~720mA
    Uberkernel: ~ 730mA


    Made another profile where the min speed was 1.5. With both Cores running full on at 1.5 and 100% brightness: ~805mA
    Auto-dim on for SURE

    Quote Originally Posted by JaimitoBond View Post
    -672mA on F4, ondemandctl, idle, auto light sensor on but slider at 100%, min 192 MHz, max set to 1.8GHz.



    MAX BRIGHTNESS = TURN OFF AUTO-DIMMER GENIUSES
Page 1 of 2 12 LastLast

Posting Permissions