Page 1 of 3 123 LastLast
Results 1 to 20 of 57
Like Tree13Likes
  1.    #1  
    As of 1425 CDT on 22-Aug 2011 it appears HP has unlocked the DEMO units; you may not need the steps below. I'll leave them here for reference.

    Solution with the help of other posts [special thanks to user chekz here on precentral.net and & webOS roundup] This set of instructions will take your DEMO unit 32GB HP TouchPad and place it into Dev mode [and help you update to webOS 3.0.2 if you haven't already done so].

    Just an FYI, the error that you receive after you flash to regular webOS 3.0.0 or 3.0.2 and can't move forward in registration is: PalmS3036 which is listed as "Device is Locked from doing FirstUse". This leads me to believe, like others, that it is merely a software reason and not a hardware one as to why we cannot use these like regular units.

    This does remove the DEMO software, allows you to update to webOS 3.0.2, and keeps you from getting stuck on trying to register; however, It is untested on weather you can log into an existing webOS account. I am unable to create a webOS account as I don't own any other webOS devices and I do not know if this will impact your ability to register/unlock your DEMO unit in the future [if HP does so]. I would assume you should be able to use webOS Doctor once again to restore the unit as it was before this solution was developed.

    Here is where i got the information:

    Touchpad demo mode - (Page 5)

    how can i flash stock rom? - (Page 3)

    Activation-Bypass Tool - webOS Developer Center

    ====

    You will need this file:
    Right click and Save as: http://onebluepoint.net/chekz-devicetool.zip

    or

    FileServe Download (again thanks to chekz)


    I. HP TouchPad Demo Unit Solution - Bypass Activation

    Steps:

    1. If you have not already, update to webOS 3.0.2

    ****a. To do this download this: http://palm.cdnetworks.net/rom/touch...2hstnhwifi.jar

    ****b. Run the aforementioned file by double clicking (You must have Java installed; I did this on Windows 7 Ultimate 64-bit)

    ****c. Continue the setup until you get to the step where you are asked to connect your device with a USB cable. (But, do not connect your TouchPad at this step)

    ****d. On you TouchPad shut down the tablet (you should be able to do this by holding the power option for a few seconds and selecting the "Shut Down" option ; if you can't get that to come up you can force a restart by holding the "Home" button and power button at the same time for apx 5-10sec)

    ****e. Restart/Start-up you device holding the Power button and the Volume Up button (This boots the device into Recovery Mode) You will know if you are successful if you see the USB logo on your screen.

    ****f. Connect your TouchPad to your computer; on screen you should be able to hit the next button to allow your device to be updated.

    ****g. Allow 10-15min for the application to finish; at the end it will tell you the device is resetting. You will see a small HP logo on your TouchPad, disconnect the USB from your computer.

    ****h. Once the upgrade is complete and has loaded you can attempt to login or create and account but if you have a demo unit; you won't be able to register. [aka ERROR CODE: PalmS3036]



    2. Power down your TouchPad (see step 1d for help if needed)

    3. Hold down the Power and Volume Up button to allow your device to boot into Recovery Mode. You should see a USB logo on screen. (see step 1e for help if needed)

    4. On your desktop, unzip the chekz-devicetool.zip file. You might want to copy this un-zipped file to your C: drive to make the next step easier.

    5. You will need to open a Command Prompt (for Vista and/or Win7 you might need to run as Admin by right clicking on the icon in your Start>Programs>Accessories folder)

    6. Change to the directory where the unzipped file is located (i.e. C:\chekz-devicetool )

    7. Connect your TouchPad to your Computer

    8. In your Command Prompt type the following command: java -jar devicetool.jar

    9: You should see the following (your device will restart a time or two):



    10. Once you see the "Device is ready." You can Disconnect your TouchPad from your computer.

    11. When you power on your TouchPad, you should go straight to the home screen; by bypassing the activation screen.

    -----

    I don't have a webOS Account to log into to see of existing users can log into their accounts. I was able to use the stock applications and login to the existing applications like Facebook. I did this about 30 minutes ago so, I am still playing around.


    ==============

    Update from 22 - Aug 2011 @ 13:45 CDT

    After completing yesterday's work; Today my goal was to get this thing fully working. I was able to create and log into a webOS Account ad even access the App Catalouge. Steps below.

    II. Create/Log in to webOS profile for DEMO 32GB Touchpads

    Information found:

    Installing Preware with WebOS Quick Install

    WebOS Quick Install v4.2.3

    Impostah

    Steps:

    1. Download WebOS Quick Install (check the links above)

    2. Open the afrorementioned downloaded file (i.e. WebOSQuickInstall-4.2.3.jar)

    3. If your TouchPad is not connected, you will get a message that says "No Devices Found". Connect your TouchPad and hit OK.

    3. Click the third button on the right (the globe icon)

    4. Select the Applications tab at the top

    5. Search for Preware

    6. Click Install.

    7. On you Touchpad, on the home screen hit the Launcher icon (on the bottom right, looks like an arrow) and go to the Downloads Tab

    8. Touch/open the program Preware

    9. In the top right corner, touch/open the Magnifying Glass and type in "Impostah". Click the one result that comes up.

    10. At the bottom of the description page you should see a Install button; touch/click to install the program.

    11. Once the download and install is complete, you should be able to launch the program. (If you are brought back to the Launcher, Impostah can be found in the Downloads tab)

    12. Once Impostah is launched, select the Activation button.

    13a. For Existing webOS Account holders You should be able to type in your email address and password and hit Login To Profile.

    13b. For New Users, type in the email address you wish to associate your account with and the password you wish to use. Then hit the Create New Profile button. You should see message asking you to confirm that you wish to proceed. To continue simply hit the green "Create New Profile" button.

    14. To verify that your TouchPad has your webOS Account associated with your device. Open the Launcher, go to the Settings Tab, then touch/open the "Device Info" icon. You should see the e-mail address you used to register/log-in to your account listed in the "HP webOS Account" field. If the "Name" field is blank, you will need to tap the blank area and enter your name.

    15. You are done! Enjoy! You can now access the HP App catalog and other webOS features.

    If you want to verify your account was created, you canlog-in to your webOS Account here: Manage my HP webOS Account

    Thanks to everyone else here and they guys over at webOS roundup for some guidance.
    Last edited by bluepoint951; 08/22/2011 at 02:40 PM. Reason: Create/Log-in to exisitng accounts
  2. #2  
    nice write up. Hope it helps this very strange way HP made demo units.
    I see pandas.
  3. #3  
    let's try hope this work
  4. #4  
    I have a 32GB demo unit, did not realize until after they sold it to me (no returns) that I wouldn't be able to log into my WebOS account. Does this resolve that problem? I was on the phone with HP forever, and they could not figure out how to fix my problem.

    I have an account from my old Palm Pre that I would like to login to so that I can recover purchased Apps, and also download new ones. Any help or advice would be great.

    Shawn
  5.    #5  
    Quote Originally Posted by sds9977 View Post
    I have a 32GB demo unit, did not realize until after they sold it to me (no returns) that I wouldn't be able to log into my WebOS account. Does this resolve that problem?
    I don't have a webOS account to log into to verify if it resolves that trouble. I am new to webOS thanks to this fire sale. This does place the unit into DEV mode and I recall from a few threads I researched these last few days that some people had success logging in when the stock DEMO unit was placed into DEV mode. [if you didn't use webOS Doctor to flash to a regular ROM liek 3.0.0 or 3.0.2]

    YMMV, perhaps someone who does have an account and has done the Bypass can fill us in.
  6. #6  
    I need an answer on this ASAP. I have one on hold at a local staples for 50 dollars. If I can create a profile and download apps, I will go pick it up tomorrow morning.

    Any help anybody can give me would be greatly appreciated. Thank you in advance
  7. #7  
    I am new to webOS thanks to this fire sale. This does place the unit into DEV mode and I recall from a few threads I researched these last few days that some people had success logging in when the stock DEMO unit was placed into DEV mode.
  8. Smokexz's Avatar
    Posts
    1 Posts
    Global Posts
    1,117 Global Posts
    #8  
    This is just a warning to everyone who wants a Touchpad but the only available device is a demo unit, don't buy it. Even if you flash the new 3.0.2 stock ROM it will not allow you to register a WebOS account or log into one. Learned that the hard way.... if you bought a store demo, return it and look for a retail version.

    Sent from my Xoom
  9. #9  
    Did you actually search and read the forums for a solution or shot from the hip like you did just there?
  10. #10  
    <<threads merged>>
  11. #11  
    what am i doing wrong? in the command prompt its telling me java is not an acceptable internal or external command program or something like that...
    Last edited by arrocha87; 08/22/2011 at 11:38 AM.
  12.    #12  
    Do you have the latest version of JAVA installed?

    Java Downloads for All Operating Systems

    ^Download and install the version that is a for your computer (if you have a 64 bit Windows kernel you will have to install both the 64-bit and 32-bit programs)
  13. #13  
    Quote Originally Posted by bluepoint951 View Post
    Do you have the latest version of JAVA installed?

    Java Downloads for All Operating Systems

    ^Download and install the version that is a for your computer (if you have a 64 bit Windows kernel you will have to install both the 64-bit and 32-bit programs)
    yes i d/l java. when i go to the command propmt it goes to c:\users\roachpc> so i dropped my unzipped jar file into drive c\users\roachpc and tried again and it still says "java" is not recognized as an internal or external command, operable program or batch file.

    im so confused...
  14. #14  
    dont need the solution anymore! HP just unlocked them! just created my profile and pad is restarting!
    daffy4u and FenrirWolf like this.
  15. #15  
    Quote Originally Posted by arrocha87 View Post
    dont need the solution anymore! HP just unlocked them! just created my profile and pad is restarting!
    So you just called them and told them you bought a demo model in the fire sale or what?
  16. #16  
    well i did call earlier and the rep said they were emailing the higher ups and to check back in a day or two. then a guy in another thread said that once doctored to get rid of demo os he wasnt stuck in the sign in screen anymore. so i stopped trying to put in dev mode and retried creating a new webOS profile and sure enough it worked!
  17.    #17  
    Further Success, after preforming the first steps, I was able to install Preware and then Impostah. Once that was done I could Create a new account and/or log in to an existing account. I now can access the HP App Catalog!

    Check the original post for additional information!
  18.    #18  
    Quote Originally Posted by arrocha87 View Post
    well i did call earlier and the rep said they were emailing the higher ups and to check back in a day or two. then a guy in another thread said that once doctored to get rid of demo os he wasnt stuck in the sign in screen anymore. so i stopped trying to put in dev mode and retried creating a new webOS profile and sure enough it worked!
    Ha, and here i thought I found a solution! I guess timing is everything. I'll leave the steps up just in case.....
  19. #19  
    If you have a JAR file problem try using JARFIX. It worked for me.

    It patches the way Windows handles a JAR file.

    http://www.softpedia.com/get/Others/...s/Jarfix.shtml
  20. #20  
    I've already doctored and bypassed my pad when I first got it. I just ran impostah and got error code PAMS9999 "Generic Fault". Do I need to doctor again, skip bypass and then go?
Page 1 of 3 123 LastLast

Tags for this Thread

Posting Permissions