Page 1 of 2 12 LastLast
Results 1 to 20 of 26
Like Tree2Likes
  1. szlaeyer's Avatar
    Posts
    22 Posts
    Global Posts
    23 Global Posts
       #1  
    hey guys,

    I have seen in the latest version of uberkernel that a new, 1.9GHz overclocking option has been ported to the Pre3.

    However, I have no idea how to enable it. I have uberkernel and govnah installed, but just these. What should I do?

    thanks.
  2. #2  
    You can change all that in Govnah, tap where it says 'Profile'.

    There's useful help inside Govnah, tap the question mark.
  3. szlaeyer's Avatar
    Posts
    22 Posts
    Global Posts
    23 Global Posts
       #3  
    Quote Originally Posted by johnnygewitter View Post
    You can change all that in Govnah, tap where it says 'Profile'.

    There's useful help inside Govnah, tap the question mark.
    yeah, eventually I figured it out. Unfortunately, the Pre3 lasts very little at 1.9GHz before going awol on me, so I reverted to the default profile and that's about it...
  4. #4  
    try 1.7ghz. It's less abusive, yet still a good 20% boost. No problems for me so far.
  5. #5  
    excusme! I'm a newbie, if I overclock Pre3 to 1.9GHz by Govnah, what are broblems with my palm pre 3?
  6. szlaeyer's Avatar
    Posts
    22 Posts
    Global Posts
    23 Global Posts
       #6  
    It can fry or just lock up a lot. I guess it depends on luck.
  7. #7  
    Second rule of the Fight Club: if you don't know how to punch, keep your hands in your pockets.
  8. Kimboo's Avatar
    Posts
    81 Posts
    Global Posts
    125 Global Posts
    #8  
    I LOVE my "new" 1,7Ghz Pre 3... Really makes a difference, and no problems yet!

    Highly recommended!
  9. ehosey2's Avatar
    Posts
    309 Posts
    Global Posts
    755 Global Posts
    #9  
    I have been running my Pre 3 at 1.8GHz with Compression Swap off for a couple days now with no problems. The battery life with all the wireless radios on all the time seems decent to me. On the other hand, when at 1.9GHz......noticeably fast battery drain and my Pre 3 even shut down and restarted once.
  10. akshunj's Avatar
    Posts
    379 Posts
    Global Posts
    380 Global Posts
    #10  
    I must have a Chuck Norris Pre3, because I haven't had any problems at 1.9Ghz. The battery doesn't hold up well, but otherwise it runs great.

    Loading flash content is noticeably faster and Bing Maps is a little snappier as well.

    -- Sent from my Palm Pre3 using Forums
  11. #11  
    I've been running mine at 2GHz and 90% up threshold with no other problems than quick battery drain. I usually run it at 1.4 and 85% with Warthog for a good compromise between battery life and performance.
  12. #12  
    It's awsome! I'll learn more about it...
  13. #13  
    Quote Originally Posted by olebl View Post
    I've been running mine at 2GHz and 90% up threshold with no other problems than quick battery drain. I usually run it at 1.4 and 85% with Warthog for a good compromise between battery life and performance.
    I tried at 1.7Ghz with no problems but only battery drain like you!
  14. szlaeyer's Avatar
    Posts
    22 Posts
    Global Posts
    23 Global Posts
       #14  
    I'm also running the phone at 1.7GHz and, this time, it is stable. Also, I didn't notice that the battery drains alarmingly quicker. It is, in fact, quite reasonable, so, yeah, maybe it's worth overclocking the phone.
  15. #15  
    My battery dies to fast to over clock.
  16. #16  
    cant say ive got the need to overclock it, no apps i have benefit it, atm ive downgraded mine to 1.2, sometimes 1ghz, if just to save battery power, the general use doesnt seem to suffer much if at all.
  17. #17  
    I'm able to run along nicely at 2.016GHz with the latest WarthogKernel. =)

    Not that it's a race. ;-)

    -- Sent from my Palm Pre3 using Forums
  18. #18  
    What amaZing! That's so a great work.


    -- Sent from my Palm Pre3 using Forums
  19. #19  
    1.9 is fine w/ noticeable battery drain. The strange thing is 1.8 runs hot for some reason (47+) while 1.9 does not. 1.7 is as cool as 1.9 or default. I'm currently testing battery drain at 1.7.
  20. #20  
    i can understand overclocking the touchpad for some stuff (esp with linux etc) but what apps do you need to overclock your pre3 for?
Page 1 of 2 12 LastLast

Posting Permissions